Some of tests/drivers/build_all/ test are failing link step only
when debug is enabled, these filters prevent those tests from being
executed under such configuration.
Jira: ZEP-1063
Change-Id: Ib2ff649794a1d73b133fbf998bbe8143a822c753
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Some of tests/crypto/test_ecc_dsa test are failing link step only
when debug is enabled, these filters prevent those tests from being
executed under such configuration.
Jira: ZEP-1063
Change-Id: I4b7376c49a401e21c413427918be549934ce03d5
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Some of tests/bluetooth test are failing link step only when debug
is enabled, these filters prevent those tests from being executed
under such configuration.
Jira: ZEP-1063
Change-Id: I87fa73710d78346b1b2ce587e9055b0732d9cb49
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Got out of sync with the revised signature of k_stack_init().
Change-Id: Ib4c67c75f30055583a457bfb13f8dacc9929ee88
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
K_THREAD_DEFINE() can no longer specify a thread group. However, it now
accepts a 'delay' parameter just as k_thread_spawn() does.
To create a statically defined thread that may belong to one or more thread
groups the new internal _MDEF_THREAD_DEFINE() macro is used. It is only used
for legacy purposes.
Threads can not both have a delayed start AND belong to a thread group.
Jira: ZEP-916
Change-Id: Ia6e59ddcb4fc68f1f60f9c6b0f4f227f161ad1bb
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Old markup was using %(target)s, which is not the right markup to use,
so it was faiing to build.
Change-Id: Idbe99cfdd695284dc2a66e5823bc65a1417fbfd3
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Implement resources so they conform to what the ETSI plugtest suite
expects.
This allows the zoap-server sample to pass most of the tests of the
CORE[1] group, only TD_COAP_CORE_09 is not implemented.
Tests involving lossy networks weren't run as well.
The tests were run against the libcoap[2] client.
[1] ETSI CoAP test description
http://www.etsi.org/plugtests/CoAP/Document/CoAP_TestDescriptions_v015.pdf
[2] libcoap
https://libcoap.net/
Change-Id: Ifa3ed21a93052e02f47e99d7cb6d9d4b28e576d8
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This sample uses the grove temperature and humidity sensor and displays the
read values on the grove LCD.
Change-Id: Id6fb6171c26c97f1b01008fa06a4dc85287d7545
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When the sample fails, it's difficult to identify whether it failed
during the configuration or transfer stage. Provide a little more
information which will allude to the nature of the failure.
Change-Id: I5272ce73f56b0e51c8439d5510e512b616665705
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Provide a network driver wrapped around the KSDK ENET and PHY
drivers.
The driver performs one shot PHY setup. There is no support for PHY
disconnect, reconnect or configuration change. The PHY setup,
implement via KSDK contains polled code that can block the
initialization thread for a few seconds.
There is no statistics collection for either normal operation or error
behaviour.
Origin: Original
Change-Id: Ia0f2e89a61348ed949976070353e823c178fcb24
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Clean up left-overs from this getting fixed first in master.
Change-Id: Ief41ecfdeeb51fbc76f2fe045a412ff1643f69c9
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There's no need to keep the custom swap_buf & swap_in_place helpers
anymore since system-wide helpers are now available.
Change-Id: I424e3592ab955410455c4226e5bf03df6f522c52
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This implements GAP Unpair command handler used to remove pairing
information.
Change-Id: Ia2e2400ea06b2b904f89ec3ee88527d1ea8f7f38
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
The Bluetooth initialization now also sets the page timeout value.
Change-Id: I367591c587bdfe135befc07b637af4cf532f55e2
Signed-off-by: Itankar, Piyush T <piyush.t.itankar@intel.com>
Added an option to set the page timeout value. Default the timeout
is set to 5.12 sec.
Change-Id: I196b59f18b9cbf0aaa226ffd85e0bb1699667af2
Signed-off-by: Itankar, Piyush T <piyush.t.itankar@intel.com>
The keys BT_STORAGE_SLAVE_LTK, BT_STORAGE_LTK, BT_STORAGE_IRK allow to store
the distributed bonding keys for ble legacy pairing.
Change-Id: Iaee8b78456e9865a53a2f1228b6afa7ff44bc4db
Signed-off-by: Roger Lendenmann <roger.lendenmann@intel.com>
This event will be used to inform tester about PTS identity address.
Change-Id: I3d25c69c3fc9a8d8a728497d1dc1d57084373e97
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Master is starting SMP over BR/EDR and it may not be a device that
started BR/EDR pairing. Although specification isn't very clear in this
it seems to be the case when checking TS for cross-transport tests.
Change-Id: I7b0a42ab0123fa444b06a4986f6b1410bf1f2789
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This moves discovery logic to the tester application.
BTP Start Discovery command flags have been extended with
"Use observation procedure" bit.
For now, Tester can search for devices in limited/general discoverable
mode or those that are broadcasters by setting corresponding flag bits.
Change-Id: I7142e8fdf40a9081787538e433067335d3ee0564
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This removes ipss_listen since it does depend on the old network stack it
cause build problems with yaip and anyway its code is only used by ipsp
sample while the net samples does not use ipss_listen at all.
Change-Id: I23987670548741bde8800115d473a3bab242153b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enabled L2CAP CoC to store data in fragmented buffers, due to
increase in memory init_17 test has to be disabled ARC for Arduino 101
otherwise sanity test would not pass.
Change-Id: If04289a03e591473de4e722031c1687a14420fc2
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>