Callback used mqtt_publish_qos1_ack but mqtt_subscribe called with
default 0 value (MQTT_QOS_0_AT_MOST_ONCE)
Signed-off-by: Alexey Markevich <buhhunyx@gmail.com>
After reviewing that test I found output looks too messy.
1. Remove words starting from capital letter in the middle of the
sentence.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Fixes the bq274xx sensor driver to check the i2c device pointer is
non-null, rather than the bq274xx sensor device pointer. This appears to
be the originally intended check based on the LOG_ERR message.
Coverity CID: 210035
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Initialize the dummy data transfer so spi transfer is defined even for
an undefined tx data buffer. This aligns the rv32m1 spi driver with the
mcux spi driver.
Signed-off-by: Karsten Koenig <karsten.koenig.030@gmail.com>
New config file to build an OpenThread NCP for the NRF52840-DK
via CDC-ACM USB on the connector J3 (labelled 'nRF USB').
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
When compiling the settings subsystems, I was getting the following
compiler warning:
```
/home/markus/src/wrp-n4m/zephyr/subsys/settings/src/settings_line.c: In function 'settings_line_cmp':
/home/markus/src/wrp-n4m/zephyr/subsys/settings/src/settings_line.c:477:6: warning: 'rc' may be used uninitialized in this function [-Wmaybe-uninitialized]
477 | int rc;
| ^~
/home/markus/src/wrp-n4m/zephyr/subsys/settings/src/settings_line.c: In function 'settings_line_entry_copy':
/home/markus/src/wrp-n4m/zephyr/subsys/settings/src/settings_line.c:453:9: warning: 'rc' may be used uninitialized in this function [-Wmaybe-uninitialized]
453 | return rc;
```
This patch fixes the warning.
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
When compiling network subsystem, I was getting the following compiler
warning:
```
In file included from /home/markus/src/wrp-n4m/zephyr/include/net/net_if.h:29,
from /home/markus/src/wrp-n4m/app/src/main/node/main.cpp:20:
/home/markus/src/wrp-n4m/zephyr/include/net/net_l2.h:80:32: warning: unnecessary parentheses in declaration of '__net_l2_OPENTHREAD' [-Wparentheses]
80 | #define NET_L2_GET_NAME(_name) (__net_l2_##_name)
| ^
/home/markus/src/wrp-n4m/zephyr/include/net/net_l2.h:82:29: note: in
expansion of macro 'NET_L2_GET_NAME'
82 | extern const struct net_l2 NET_L2_GET_NAME(_name)
| ^~~~~~~~~~~~~~~
/home/markus/src/wrp-n4m/zephyr/include/net/net_l2.h:114:1: note: in
expansion of macro 'NET_L2_DECLARE_PUBLIC'
114 | NET_L2_DECLARE_PUBLIC(OPENTHREAD_L2);
| ^~~~~~~~~~~~~~~~~~~~~
```
This patch fixes the warning.
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
This is no longer required since drivers implementing the sockets
offload interface were migrated to use pure zsock_ instead of
raw POSIX types and functions.
Signed-off-by: Adam Porter <porter.adam@gmail.com>
Aligns MAC registers to the latest reference manual.
Replaces NULL buffers as some SPI drivers will fail.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Enable GPIO as a workaround to enable some SPI slaves are not correctly
controlled using the Flexcomm SPI device.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
This patch introduces the new b_l4s5i_iot01a discovery kit
from STMicroelectronics.
This is a IOT node based on the stm32l4s5vi
including MEMS, Bluetooth BLE, WiFi and NFC modules
Signed-off-by: Francois Ramu <francois.ramu@st.com>
A net context in LISTENING mode waits for incoming connections, once
a new connection is established a new net context is spawned which
is responsible for handling the new connection.
Therefore when closing a LISTENING context it is not useful to send FIN
as it is never connected. Actually closing the connection would be done
by calling close on the spawned net context which is returned by the
accept call.
Signed-off-by: Léonard Bise <leonard.bise@gmail.com>
The CONFIG_BT_RPMSG_NRF53 should depend on the SOC, not the BOARD
definition. Otherwise this will break for custom boards.
Signed-off-by: Thomas Stenersen <thomas.stenersen@nordicsemi.no>
This tests make sure that the right source address is chosen during
the mesh multicasting.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Currently there is chosen the link local address as a source address
for each multicast destination address. It is a bug for OpenThread
network where the mesh-local EID addres should be picked in this case.
This commit fixes it by distinquish the mesh local multicast among any
others.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
This commit removes API functions and macros which were deprecated in
2.2 release. GPIO drivers are updated accordingly.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Replace usage of deprecated GPIO_INT_ACTIVE_LOW, GPIO_INT_ACTIVE_HIGH,
GPIO_PUD_PULL_UP flags with a new equivalent in a few boards that were
added after 2.2 release.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Modified order of reported events on rx disable to match API
description: first RX_RDY and then RX_BUF_RELEASED.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
So far, when rx_disable was called then received data was discarded.
This is currently not according to the API but it is needed if
rx_disabled is called due to out of band information about end of
packet.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
So far, when rx_disable was called then received data was discarded.
This is currently not according to the API but it is needed if
rx_disabled is called due to out of band information about end of
packet.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added CONFIG_UART_ASYNC_API to enable documentation generation for
asynchronous API.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Updated rx_disable() description so that RX_RDY event is generated
after calling rx_disable. It contains data received prior to abort.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
With timeout==0 count is set to 0 as well and then it is decremented to
-1. It is later checked == 0 and continues to decrement and loop.
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
Use the NRF RNG entropy device as the entropy device for bt_rand and
controller internal functions when LLL is Nordic.
Using an entropy source with a significant increase in stack usage
will invalidate all stack size configurations in the system and lead
to stack overflow issues.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Those MCUs have 2KB RAM and 16KB FLASH memory, but they are still
powerful enough to run small configuration of Zephyr RTOS.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Added / Tested support for RNG on the STM32F767ZI nucleo board.
Updated the SoC defconfig to auto-enable the driver when
ENTROPY_GENERATOR is enabled, and updated the board README.
Signed-off-by: Bilal Wasim <bilalwasim676@gmail.com>
It was not clear that hexdump messages does not support prepending
with function name. Added clarification.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The HPET timer was hard-coded to support only edge triggering
interrupts. This adds the necessary bits to enable level
triggering for the timer.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Fix compilation regression due to addition of const
qualifier to tx_pwr_lvl parameter of ll_tx_pwr_lvl_set
function. Support for BT_CTLR_TX_PWR_DYNAMIC_CONTROL
needs the tx_pwr_lvl to be updated and returned.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The driver API should be assigned at the time the device is defined.
Assigning in the init function is redundant and prevents moving the
pointer to a immutable driver structure.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Update code comments in ringbuffer/src/main.c
modify a testcase to verify the address stored by ring buffer
is contiguous, and the size of every element is equal to the size of
pointer.
Signed-off-by: Ningx Zhao <ningx.zhao@intel.com>
DMA driver shall be initialized before any of its
clients. Right now, its initialization priority is
lower than that of UARTs. So, increase its init
priority to support future async uart drivers.
Signed-off-by: Jun Li <jun.r.li@intel.com>
- Change default CPU Clock to 240MHz
(PLL is activated)
- I2C, UART will use sysclk from clock driver
- esp32_enable_peripheral replaced by
clock_control_on
Signed-off-by: Mohamed ElShahawi <ExtremeGTX@hotmail.com>
- Support PLL for Higher Frequencies 80,160,240 MHz
- Support XTAL Frequencies 26MHz, 40MHz
- Clock Driver can't be disabled, because all of the other drivers
will depend on it to get their operating Frequency based on chosen
clock source (XTAL/PLL).
- Add needed references to BBPLL i2c bus ROM functions.
- Add `rtc` node to Device Tree.
- Since All Peripherals Frequency is depending on CPU_CLK Source,
`clock-source` property added to CPU node
Signed-off-by: Mohamed ElShahawi <ExtremeGTX@hotmail.com>
If CONFIG_THREAD_NAME is enabled, we must use log_strdup() when
printing the thread name.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
test_testsuite_class.py: Added testcases for load_From_file and
apply_filters functions of Class Testsuite.
conftest.py: Modified class_testsuite fixture to create the
outdir as temporary directory which gets deleted after execution
of testcases.
test_data/sanitycheck.csv: load_from_file function uses this
customized file to load the failed or last run testcases.
test_data/sanitycheck_keyerror.csv: file used by
test_load_from_file function to raise the appropriate error
if there is a keyerror.
scripts/requirements-build-test.txt: added mock & csv python libraries
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
