run make initconfig to only create the .config in outdir.
The .config will be the result of the defconfig merged with the local
application config define in CONF_FILE.
Change-Id: If2a308ac3805d32cea8dd7be7a14772f22443600
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This test takes too long to run, do not run it on multiple
platforms of the same architecture.
Change-Id: I3f121cfd22b99f3910fcbb9ef45a53b0abf79360
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Currently useful only for Galileo.
Change-Id: I8d4fafd530e11a50f91cedd0de1691393f270b9c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Setting up the right SPI port, its configuration and max frequency.
Also, setting NANO_TIMEOUTS by default as it is required for delayed
operation inside ADC's driver.
Change-Id: I63b2b872ff858f1d80065a94ba3e2f303d279a67
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It's an SPI driven chip and proposes up to 8 channels for input
conversion. It's found on Galileo board.
Change-Id: I916367e9be0849812c6a509082a501730a01ce60
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
- making bswap_16 and bswap_32 for both
- adding sys_be16_to_cpu, sys_cpu_to_be16, sys_be32_to_cpu and
sys_cpu_to_be32
Change-Id: I3aacc91590ee584d83c512d78a9287380969d9aa
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Taking the opportunity to set simpler driver names for port 0 and 1.
Change-Id: I994bc43daaf6bc43b0dad564a72577c874f72d2d
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It might be needed sometime to get some private data forwarded to the
callback, thus such user_data pointer is the easiest way to proceed.
Adding a macro to set the word size as well.
Change-Id: I68cbe2d480120253ccb13f13c656a38c27e21604
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If those are not set it means the controller has nothing to request
anymore from the driver.
Change-Id: Ie7e834e82b931e4b02ded3f9f619735b31b0a121
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Since the driver is the only one needing those, no need to expose them
anywhere.
Change-Id: Iac4eaa65a9dbdaa8e72c70ea0de35cd2b3d836d1
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
At this points the slave is ready to deal with the master.
Change-Id: I815d3c577bd0b73100cbf585cc8ca78f180ec713
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This was failing, the documentationg provides numbers only telling at
one places these are hexadecimal values. So switching to hexadecimal.
Then DDS rate retrieving macro was bogus, so fixing it.
And adding debug output about the DDS rate and the clock ratio.
Change-Id: I9cc414796fbd7f7123f1f406c6bce7ffacf641e8
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
*_PORT_1_* not *_PORT_0_* obviously.
Change-Id: Idefad40c25b4ad54d9558355daab224bc634c2e7
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Galileo SPI interrupt is of type level low, thus setting it to this
value in Galileo's defconfig and removing useless entry in Kconfig.
Change-Id: I90bcc74be1a957bf59912d6f8c2234cfa4fe2329
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Change-Id: Ia9c003261d3f07bf9ecbe406b09c6136712e923b
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
With the introduction of generic transfer function, it is no longer
needed to specify read or write functions explicitly in drivers.
All read/write functions can now thus call the generic transfer
function to achieve the same result.
With this change, the transfer function becomes mandatory, and
should always be available.
Change-Id: Ia6fb98e58b84330a56a5d44ed3df9db42c3a5e88
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The newly introduced i2c_poll_transfer() is now used for register
read for PCAL9535A GPIO driver. The old write then read does not
work because every read or write ends with STOP. However,
the chip requires RESTART after writing the register address.
So the new generic transfer function is perfect for this.
Change-Id: I56d7ebe08f68cb04731c72138d60645ef124f65e
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
() For interrupt driven transfer, the driver already has
a generic transfer function, so this simply exposes it
for public consumption.
() The polling write is extended to support generic
transfer.
Change-Id: I657db8a6376282c723728b7a875813d389cf7d27
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add an API to I2C for generic transfer. This is for those data
transactions which are more complex than simple read or write.
One example use of this is to read register data from a slave
device. The master has to write the address of the register
to slave, then start reading from slave for register data.
In this situation, simple read or write is no longer
sufficient, as for some slave devices, they require RESTART
when data transfer direction changes. Doing a simple write via
i2c_write() results in STOP at end of transfer, which results
in the slave not responding to read request as it is not
expected to send anything back.
Change-Id: I22f9c5ba2f7a7c48a33b9cb1aaf559e596a85d39
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
() Re-organize the steps involved in data transfer, according to
the datasheet's flowchart.
() Extract the common code for transfer initialization and put
it into its own function.
() i2c_write() and i2c_polling_write() are now using the common
data sending function.
Change-Id: Ieb90253ee10ddceb3b5d05b258e7fc6253d18729
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Polling in/out are basic UART functions that are supposed to
work on every UART controllers. Therefore, both poll_in and
poll_out are now mandatory. The API no longer checks if
they are defined before calling. This is to avoid the if
statements so to speed up things a bit.
Change-Id: I3bd1e7a2dfa5405699ebaec3eb34cfc0434b0073
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Both poll_in and poll_out are supposed to be implemented
in each driver, as these are basic function.
Change-Id: If1b6b11834f57934fe7e776bfcf818e088abdd0a
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Passing checkpatch check to use tabs instead of spaces for everything.
Change-Id: Ieffa0b0cc4b24598e7cbce7edf9ed640c8fb27dd
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Moving the includes to include/tinycrypt. This will help make it
clear when looking at source files where each header originated from.
Change-Id: Ic79978da286f9c288868074a69262d89488925b8
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
XIP is currently implemented in Zephyr by copying only the RW
sections from flash into RAM. For these sections, if the VMA spacing
is different than the LMA spacing the sections in RAM will not be
at the right addresses. Warn about this situation.
Change-Id: I59a55fc27703103e37a7f0bbc34f236047621e0e
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
- Several recently added binary sections were not being taken
into consideration, unknown sections now trigger test case
failure
- Use same VMA/LMA terminology that objdump uses and show both
addresses
Change-Id: I641eef64aaed6612f62e5aa092f66baaa2797c70
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Bad things happen if an SW IRQ is asserted before it is initialized.
Change-Id: I4ad48480c4d7bb5fc14d778d2566d73086300fa1
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This commit breaks the sanitychecks
This reverts commit 93fa1053b21efe3d030ea060a31b80d6008d5bfd.
Change-Id: Ia52092e845c33234817a1cb27cd1f17064c65e7e
Signed-off-by: Anas Nashif <nashif@linux.intel.com>
Updated as per Allan's comments to correct use of Zephyr
kernel in lieu of codename variable
Change-Id: Iaf5f8531c5452b6d8fb13318f00050aa63d99200
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Editing language.rst file to clarify a few items
Also correcting a few things I missed earlier
Also fix title case without hyphen to be consistent
Change-Id: I463d1cdb436957a14af6ea40933f892a51b161aa
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Passing checkpatch check to use tabs instead of spaces for everything.
Change-Id: I2fdd507d48db83fda8d183043c5a4ab1b97148dc
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Moving the includes to include/tinycrypt. This will help make it
clear when looking at source files where each header originated from.
Change-Id: I062cb3c6ecc5bc2ed2d28228d5926646b6b5f912
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Fixes the tinycrypt library to use Zephyr checkpath acceptable line
lengths.
Change-Id: Ia7bef46a39fa029cda826ec5b2d7d42036d9bdfe
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
If the other tasks try to trigger a SW IRQ before MONITORTASK
has initilized it, the CPU generates an exception.
Change-Id: Id2745d728a7cf15132096585c073f85f8306cb38
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Needed to get simple uart driver working in qemu with
SLIP networking or qemu<->qemu network testing. Because
this is only needed in qemu the patch only touches ia32
platform.
This can conflict with Bluetooth in x86 and qemu so caveat emptor.
Change-Id: Iba20543f968c8fd37ee36747d9aa1ad3f782057d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If bt_conn_security failed required security level should be set
back to current security. Otherwise it might not be possible to
try later on with lower security.
Change-Id: I3ad7151f2cdff15147b9948bbdab516b8cc16ce2
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This fixes the bug that affected pairing as peripheral.
With this patch pairing flag is cleared and timeout timer stops
if all keys has been distributed.
Change-Id: If7575197d5a42a0ca5bb158ea5607934e92abb81
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Rename bt_conn_connected to notify_connected. This will avoid
confusion with BT_CONN_CONNECTED state name. Same goes with
bt_conn_disconnected.
Change-Id: I6e9d50016036b30345068ef2a6bb556c45d7dd06
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Delaying only connected callback resulted in races where security
or pairing callback could be called before bt_conn connected.
Currently only procedure that relies on read features is connection
parameters update and that should not conflict with other traffic.
Change-Id: I835535abbff21ea8d86b728f5681f90ef9fd337c
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Print current number of free MAC buf count when allocating
or freeing mbufs.
Change-Id: I3c434671b28ac4b4d8c8d968899e891391d849d9
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If mbuf could not be allocated, then do not try to free it.
Change-Id: Idf48f9f2eda260b8560a5388c920a9d9a3ef8f16
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The stack usage was not printed often enough when receiving
and sending 802.15.4 packets.
Change-Id: I61a4b6acdc10cb1681e2aeb63cb6af7a35834dff
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The TX stack usage data and statistics were only printed
if there was an error. This happened very seldom which was
not very helpful.
Change-Id: I059cf9ee3449e5b39d872ef6026df968d86d0209
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
