This patch adds the base DTS and yaml files required to support DTS
for the STM32L476 based Nucleo board.
Change-Id: Ic606a895a25f27d2990f651d0f3c3c5d84818cfd
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch ifdef's out information that would be redefined by
information generated from DTS. This patch also fixes up the serial
drives to work properly with the DTS generated information.
Change-Id: I912ccf35be23c107705a4866e5a68b3b51154ffa
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds the necessary DTS, YAML, and Makefile changes necessary
to generate proper include information for the CC3200. The initial
base support includes SRAM, FLASH, and UART devices.
Change-Id: I8ef8c24c3915198dbb5cfeb2431aa6dc68267d0e
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds DTS support for the Hexiwear K64 platform. This
includes enabling the DTS config option and adding conditionals around
the options to be replaced.
In addition, a DTS file is provided that customizes the Kinetis
platform to match the hexiwear board. A fixup file is provided to map
the generated information to the current client driver usage. This
file is temporary.
Change-Id: I247d538c6e13e0d1d4141fee74046575a7d2972e
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds DTS support for the FRDM_K64F board. The defconfig
enables the DTS usage and the FRDM K64F specific DTS file provides the
differences from the base Kinetis DTS definitions.
A fixup file is provided to map the generated configuration information
to the driver consumers. The fixup file will be removed once the
drivers are modified to handle the newly generated information.
Change-Id: Ib0ada28faff6a30e8b40eba5c5853e9018ae5fcb
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds DTS support and related files for the NXP Kinetis
platform. The DTS files contain the base definitions for the hardware
nodes on Kinetis platforms. The YAML files provide the definitions of
the contents of the DTS nodes.
The Kconfig changes were put in place to allow for the conversion of
existing drivers. Once those drivers are modified, the Kconfig options
that are replaced by the DTS information will be removed.
Change-Id: If110fffa99c0b12471cf2df206da6687277e4756
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds the base DTS and YAML files that may be referenced by
SoCs. The device tree files provide base definitions for the more well
known ARMV7M device nodes. These files are meant to be included in
SoC vendor specific device tree files.
The YAML files provide definitions for the contents of device tree node
that contain information that will be parsed and used for configuration
in the system.
DTS files define hardware and software configuration and YAML files
provide the markers for knowing which pieces need to be extracted.
Change-Id: I7e90fe19f09afb269b7b2988c2c19c0f26d7ee7c
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds support for using device tree configuration files for
configuring ARM platforms.
In this patch, only the FLASH_SIZE, SRAM_SIZE, NUM_IRQS, and
NUM_IRQ_PRIO_BITS were removed from the Kconfig options. A minimal set
of options were removed so that it would be easier to work through the
plumbing of the build system.
It should be noted that the host system must provide access to the
device tree compiler (DTC). The DTC can usually be installed on host
systems through distribution packages or by downloading and compiling
from https://git.kernel.org/pub/scm/utils/dtc/dtc.git
This patch also requires the Python yaml package.
This change implements parts of each of the following Jira:
ZEP-1304
ZEP-1305
ZEP-1306
ZEP-1307
ZEP-1589
Change-Id: If1403801e19d9d85031401b55308935dadf8c9d8
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This commit removes unnecessary CONFIG_SYS_POWER_DEEP_SLEEP protection
in shim drivers as QMSI 1.4 has introduced empty context save/restore
functions that can be called in Quark D2000, therefore keeping common
code at the shim driver level for Quark SE and D2000.
Change-Id: Ia2a466327f999668c6511c0193014e9151bff6ae
Signed-off-by: Juan Solano <juanx.solano.menacho@intel.com>
While iterating on each node element it is much more common to try to
access the container struct which up until now have been done manually
using CONTAINER_OF macro, so this introduce CONTAINER variants that allow
to iterate directly with container pointer rather than the list node.
Change-Id: Ie1e0da948cb9517c3c5cd8e86b59b95d7d027bfa
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
While iterating on each node element it is much more common to try to
access the container struct which up until now have been done manually
using CONTAINER_OF macro, so this introduce CONTAINER variants that allow
to iterate directly with container pointer rather than the list node.
Change-Id: Ia24d9b88d5e2c43ffd476f565faf5bb523a9927b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Use new device name for SPI device
Jira: ZEP-1704
Change-Id: Iec39468bbef54423af2b3a681dd4ae1eee866d1e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Currently the BLE modules on the Panther boards are configured to use
a 115200 baudrate.
Change-Id: I093db68c0fc172757b5878401b99ada7ae0c99d9
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Change the handling of iface parameter in net_if_ipv6_maddr_lookup()
function:
* If the *iface is set to NULL, then return the found
interface to the caller.
* If the *iface is not NULL, then use that interface
when doing the lookup.
Change-Id: Ia1f0365170ea9f3e615d189231160614a80d241a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Because of the change in next commit "net: if: Change
the iface param in net_if_ipv6_maddr_lookup",
we must initialize the network interface to NULL.
Without this the multicast address lookup will fail.
Change-Id: I113b44ce23c5f2ecbbf1698972078f102995e891
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make the IP address parameter const because we are not
modifying the IP address in net_if_ipv6_maddr_add() or
net_if_ipv6_maddr_rm()
Change-Id: I98c19de132e58c386f661e8a76a349d562a82c71
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the function does not change the original data, make
the corresponding parameter const.
Change-Id: I1125a2f9205dc73de2f0aac0c30110591baace1e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the TX thread is not in k_poll() when conn->state gets set to
DISCONNECTED and a dummy buffer is pushed to conn->tx_queue the
bt_conn_prepare_events() function would have failed to add the
connection to the poll list for cleanup. To ensure the cleanup always
happens introduce a new flag that indicates that a cleanup must
happen. The extra benefit of the flag is that we no-longer need a
dummy buffer, but can simply use the conn_change signal to wake up the
TX thread.
Change-Id: I369584d305261ab3666b931c786daff9d131d228
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
From k_poll_signal_init() documentation:
The poll signal contains a 'signaled' field that, when set by
k_poll_signal(), stays set until the user sets it back to 0. It thus
has to be reset by the user before being passed again to k_poll() or
k_poll() will consider it being signaled, and will return immediately.
Change-Id: I55daac92dd6293ac653fd7fa0f907b0b7fd99d65
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
When iterating to the subscriptions to be removed the code has to keep
a reference to the previous node but it case the subscription matches but
doesn't need to be removed it doesn't update the prev node which may
corrupt the list in case the next node end up being removed.
Change-Id: Ic5448f01bf78d293f93b9a7078a0147385ea1d23
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Update the dma block transfer sample app to use the new
dma api interfaces. This change is based on the api change
and the updated dma driver.
A RFC was posted recently on this.
Jira: ZEP-873
Change-Id: Icf3bec7260c2e499485b07a4a579956448a1a3fd
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Update the qmsi dma shim driver based on the new dma api
interface.
Recently, a RFC was posted to update the dma api. The update
to dma api interface was already posted. This change is to
update the dma qmsi shim driver based on the dma api change.
It is using the new data structures and new api function names.
Jira: ZEP-873
Change-Id: If9a772c5ff1c2b10fca05172c48f75223bbf940e
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Update the dma API.
Recently, a RFC was posted and reviewed to update the dma
API. This change is to update the APIs. The change can be
summarized as follows,
1. Compress config data structure to reduce memory usage.
2. Add missing configuration parameters.
All the existing data structures and APIs will be
deprecated and replaced by new ones.
Jira: ZEP-873
Change-Id: I412935fce7a2db9d69b2ef700a995af07fa60e33
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Poll events were getting registered even when polling conditions had
already been met, but events with conditions met did not register and
did not increment the number of events registered. This caused a
possible discrepancy between the number of events registered and the
position of the last event registered in the events array.
As soon as one event condition is met, the next ones in the array should
not get registered even if their condition is not met. This is what the
code does now.
Change-Id: Ibcc3b135ec9d3cf463beb9da3f641fec962b34bf
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
Gerrit patch https://gerrit.zephyrproject.org/r/#/c/10849/
created a doxygen folder that make clean should remove
Change-Id: I5cd4dea489c868eef4f101c20cced3280b7abc39
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
gerrit patch https://gerrit.zephyrproject.org/r/#/c/10849/
changed where doxygen xml data is generated. Git should
ignore this directory.
Change-Id: I7f9aa9246e6453deb74ecb71b5e786253fba9d0a
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Depending on the version of Python 3 the user has installed, 'open'
may default to using 'ascii' encoding. Since the documentation is in
UTF-8, and contains characters beyond 'ascii', this will result in
failures when using these versions of Python.
Fix this by being explicit about the encoding to be used when reading
these files.
Signed-off-by: David Brown <david.brown@linaro.org>
Change-Id: I54c69334c6bf377f1135cec04f4e0ea96a8e9a5b
Without this patch, the final linker script had a memory region defined
as:
RAM (wx) : ORIGIN = 0xA8006400, LENGTH = 55*1K - 0x20 +0x4
resulting on the wrong RAM length. Fix BSP_SHARED_RAM_SIZE definition
so the sum is always processed first.
Change-Id: I16b93adbaf27bb84b6e5d1ac433ef80f854b218c
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
