This patch sets the correct LSI_VALUE, according to
STM32F3 reference manual's (RM0316) section 9.2.5 and
STM32F1 reference manual's (RM0008) section 7.2.5.
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
The IEEE 802.15.4 UART pipe config files in
echo_server/prj_qemu_802154.conf and echo_client/prj_qemu_802154.conf
did not had proper configuration options set. This prevents
qemu<->qemu communication between the echo-server and echo-client.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If building a server that does not support TCP, then the
get_server_ctx() is not needed and thus needs to be compiled out.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Explicitly note that while these functions return pointers to
headers, the headers themselves may be fragmented into different
data fragments. 1a2f24f920 is an example where this might have
been overlooked.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Don't use names like "strlen" for parameters. Try and name buffer
parameters consistently.
NOTE: For several functions I removed "const" flag. This is
intentional and will be needed in upcoming patches.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Remove some left over TODOs and also fix a TODO where we need to return
the appropriate error code to generate a 4.05 response.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
This calculation reads the length portion of the COAP header to determine
the length of the coap packet. However, when encrypted via DTLS this
value seems to be getting corrupted. Let's change this calculation so
that it will work for when DTLS is both enabled and disabled. Use the
total length of the fragment data and substract back out the headers
to get a correct value.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
When source address is unspecified then SAC is 1 and SAM is 00.
Uncompression does not process because context based compression
is not enabled.
Special case (SAC:1 and SAM:00) should be handled without context
based compression support.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Add system workqueue information prints to "net stacks" command.
This helps debugging when figuring out which stack is running out
of space.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Enhance existing "net app" command so that it can be
used to show information about multiple connections.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we get MAC verification error in handshake, it could be that
everything is fine but we ran out of heap memory in mbedtls.
In this happens, suggest the user to check amount of memory
in mbedtls as it might just fix the issue.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As we select net_ctx, it is useful to see who actually called
the _net_app_select_net_ctx() when debugging the call flow.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Sometimes when sending network packet, the wrong net_context was
selected which prevented data to be sent.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We should not close the TLS connection immediately if the TLS
data is not yet sent. So if user calls net_app_close() and we
still have data pending, then send the TLS data and only after
that close the connection.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As there can be multiple listening network contexts, it should
be possible to close one of them.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The server is able to listen and serve multiple incoming
connections. This commit does not add support for multiple
incoming TLS connections.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
IRQ_CONNECT() was being expanded with the IRQ line for the first device
twice, causing spurious IRQs.
Should fix#4398.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
The IAMCU variant does not need to be the default, this calling
convention was to support the discontinued Quark platforms.
qemu_x86 and qemu_x86_nommu now are set as default.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This will run all tests with the memory management unit disabled.
This means no hardware-based stack protection or user threads.
qemu_x86_iamcu now runs with all MMU features enabled.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
main.c and test_thread_init.c merged.
All tests which don't require cooperative priorities now running in
user mode.
Userspace tag added to testcase.yaml.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Some unnecessary k_thread_abort() removed.
userspace tag added to testcase.yaml.
Suspend/resume, spawn_forever, and spawn_priority tests remain in
supervisor mode due to the priority requests they make.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Unnecessary k_thread_abort() removed from test_msgq_purge_when_put.
A single global msgq object is now shared instead of being declared
on thread stacks, except for an ISR test case which has had its
semaphore renamed.
Moved k_sem_init() call from msgq_thread() to test_msgq_thread()
to fix a race condition.
userspace tag added to testcase.yaml.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
main.c and test_sema_contexts.c merged
userspace tag added to testcase.yaml
stack-allocated semaphore in test_sema_thread2thread now just uses
the global semaphore with the same name.
ISR tests run in supervisor mode.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
main.c and test_alert_contexts.c merged.
User threads can't look inside the alert structures, so an extra
variable 'htype' introduced to track expectations for any given
alert object in alert_recv().
Alert objects have to be initialized by supervisor threads since
they register callbacks. An array of toplevel alert objects created
and initialized in test_main(), replacing the ones that used to
live on thread stacks.
Added userspace tag to testcase.yaml
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Main thread grants itself access to objects it or its children need
and does the rest of the test case in user mode.
Statically defined threads now all run in user mode, with permissions
granted via K_THREAD_ACCESS_GRANT().
Added userspace tag to testcase.yaml.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Most calls to device_get_binding() will pass named constants generated
by Kconfig; these constants will all point to the same place, so
compare the pointer before attempting to match the whole string.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
This patch adds support for TI Simplelink MSP-EXP432P401R-LAUNCHXL
development board based on Cortex M4 family
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This patch adds support for on board UART_0 on MSP-EXP432P401R-LAUNCHXL.
Driver makes use of driverlib available in ROM by default, thus saving
code space.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
This patch adds Kconfig/build support to MSP432P4XX
SDK. MSP432P4XX microcontrollers have driverlib flashed
onto the ROM, which will be used by default.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
There are some minor conflicts or porting changes needed to get the
msp432p4xx SDK to work with Zephyr:
1. Remove definition of BIT, as it conflicts with Zephyr defined one
2. Set __SYSTEM_CLOCK define based on Zephyr Kconfig define
3. Fix a build warning that gets treated as an error.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
MSP432P4XX SDK is a CMSIS based SDK offered by Texas Instruments
for supporting their Simplelink MSP432P4XX microcontrollers. The
version included in Zephyr is V1.50.00.12 which is a stripped
down version containing only HAL and SoC header support.
Origin: SIMPLELINK-MSP432-SDK
License: BSD 3-Clause
URL: http://www.ti.com/tool/simplelink-msp432-sdk
Version: V1.50.00.12
Purpose: Provides HAL support to MSP432P4XX SoC
Maintained-by: External
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
