Controller asserted in preparation of a role event due to
the previous (same or another) role event preparation being
not complete.
Mayfly callee was disabled in the previous event due to the
preparation time being short and previous start running
(higher natural priority) before all previous preparation
mayfly completed. The previous start disabled mayfly to
avoid Radio ISR latencies.
The current role event that asserted, preempted the
previous role (observer role with continuous scanning
window) which runs until preemption to maximise the Radio
h/w use (observer scanning until next interval). The
previous preparation mayfly is still disabled when the
current role preparation tries to use same mayfly instance
which should be free for a new enqueue.
This commit updates mayfly implementation so that mayfly
callee is disabled only after all enqueued mayfly instances
are run to completion.
Jira: ZEP-1839
Change-id: I3e0d31422db8e47b819189110b11ebd07dd09a7c
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
The 100ms limit is only valid for controllers before version 5.0. For
a 5.0 controller the minimum is 20ms (0x00a0) which is already checked
for later in the valid_adv_param() function.
Change-Id: I0566a38ff855800d2e46e1d2c0a5c7bc9bc610cd
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Since there are no mandatory features in 5.0 when compared to a 4.2
compliant controller, report 5.0 as the current specification
implemented by the controller, to allow for features such as short
advertising intervals (< 100ms) which are already supported.
Change-Id: I1b138a86290a0422760a5e265cdd7b72d68f0048
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add support for detecting version 5.0, i.e. 0x09.
Change-Id: Ia2da513b65c420142fe97a4fa173bfa8045e9d75
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Filters the service records by going through all the records and
removes the one which does not have the uuid. So finally, only
the records which has all the uuids in the service search pattern
will be present in matching recs.
Change-Id: I1daa7c1b645efae2af66962999cc4c541891eff7
Signed-off-by: Kaustav Dey Biswas <kaustav.d.biswas@intel.com>
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
bt_gatt_get_mtu can be useful when GATT is used to transport another
protocol on top.
Change-Id: I328ef49138ccc4ce642b0019d08060f6022d5aa7
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Handles the service search request from peer, parses the service
search pattern (which is a data elem seq of uuids to be searched)
and populate the uuids.
This also populates the registered records which will be filtered
based on the uuids in the pattern (which will be done in the subsequent
patch).
Change-Id: I9a232a7cfdd159325214ed13e98cc20be39a2e3b
Signed-off-by: Kaustav Dey Biswas <kaustav.d.biswas@intel.com>
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
This is mainly done to avoid VLAs for looking up the service to handle
service search requests so that we can make sure that RX stack size
is sufficient for the defined no of services.
Change-Id: Ia99072615d9094a35bd7605ed2901e8018c0ecb2
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Instead of returning -EINVAL at runtime assert in case of invalid
parameters.
Change-Id: I40505f06a4c12445bfb1f1846ace1b592b6bc342
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Separate out data element structure header into type and size fields
Change-Id: I869ee1ea82db1f6d669bb905055135b7d63f3fa2
Signed-off-by: Kaustav Dey Biswas <kaustav.d.biswas@intel.com>
L2CAP TX and RX MTUs will be exchanged during configuration req/rsp.
It should not be modified after connection.
Change-Id: I1e291c9e093561f349bcdcbb75cd7ff22b4163a5
Signed-off-by: Kaustav Dey Biswas <kaustav.d.biswas@intel.com>
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
A new Kconfig debug option now controls the usage of pin toggling to
debug the BLE controller.
Change-Id: I24c5c13ca71e3395e10f14e27ad4bca9f2e94687
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Use macros to identify the different debug pins used to monitor the
runtime behavior of the controller, for easier identification of the
lines.
Change-Id: Ia76d6298985b1d367b7ad193d8261f5403446371
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Added an API to allow addition of stream end points by the application.
Change-Id: I91b95fc5dc3b9b2950e8d55b5846e460e55f2453
Signed-off-by: Piyush Itankar <piyush.t.itankar@intel.com>
It was observed that due to possible CRC errors, one
connection interval was not sufficient by the peer to
respond to LE Ping PDU which caused the Controller to
generate the Authenticated Payload Timeout event to host.
This fix advanced the dispatch of LE Ping PDU by 6
connection intervals that the peer would listen to before
the 30s timeout.
Change-id: I6c292c623047a05b4e771e70093d87228db62cce
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
The new hard real-time (direct) interrupt support is used
only for Radio IRQ. Only Radio ISR has hard real-time
requirement of completing its execution inside the tIFS of
150us.
This commit reverts back RTC0 and SWI4 ISR to using the
normal IRQ_CONNECT.
Observed on nRF51, Radio ISR (open text, notifications):
Latencies: min. of 5us and max. of 10us.
CPU utilized: min. of 44us and max. of 77us.
Observed on nRF51, Radio ISR (LESC, fast encrypted,
notifications):
Latencies: min. of 5us and max. of 10us.
CPU utilized: min. of 39us and max. of 112us.
Jira: ZEP-1038
Change-id: Id3d09df7bdbdfea090f21f6f58aaded8c5f1e10d
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
The new hard real-time (direct) interrupt support in the kernel allows
ISRs to be run directly with no significant latency overhead.
Use this new mechanism to improve the latency of the 3 critical
interrupts in the controller: radio, RTC0 and SWI4.
Jira: ZEP-1038
Change-Id: Ief9dacbea4c4c2e8a1c77893a0d6175a91819ffb
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This fix not removing subscription if it was first element on the list.
In that case prev was NULL resulting in passing garbage node to
sys_slist_remove.
Change-Id: I9452af08409692f9a331afd514fbac8cc727d289
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
This fix legacy pairing with passkey entry model when passkey
is fisr entered on local side. Replying with error in that case
is bogus as we should just wait for remote confirm.
Change-Id: I75480802928fd29d21617aa9250f90df647eb9a2
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
List container changes apparently were merged in the wrong order causing
leaving it with a compilation error.
Change-Id: Ib9d9502ddb39330c262e495a33592d0340713d83
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If the TX thread is not in k_poll() when conn->state gets set to
DISCONNECTED and a dummy buffer is pushed to conn->tx_queue the
bt_conn_prepare_events() function would have failed to add the
connection to the poll list for cleanup. To ensure the cleanup always
happens introduce a new flag that indicates that a cleanup must
happen. The extra benefit of the flag is that we no-longer need a
dummy buffer, but can simply use the conn_change signal to wake up the
TX thread.
Change-Id: I369584d305261ab3666b931c786daff9d131d228
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
From k_poll_signal_init() documentation:
The poll signal contains a 'signaled' field that, when set by
k_poll_signal(), stays set until the user sets it back to 0. It thus
has to be reset by the user before being passed again to k_poll() or
k_poll() will consider it being signaled, and will return immediately.
Change-Id: I55daac92dd6293ac653fd7fa0f907b0b7fd99d65
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
When iterating to the subscriptions to be removed the code has to keep
a reference to the previous node but it case the subscription matches but
doesn't need to be removed it doesn't update the prev node which may
corrupt the list in case the next node end up being removed.
Change-Id: Ic5448f01bf78d293f93b9a7078a0147385ea1d23
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If subcription was found within the subscription list,
we have check if remains identical subscription
from the next node.
Otherwise none unsubscription is realized.
Change-Id: I38132d7c80575801885b8057902f3d4666b08aea
Signed-off-by: Jonathan Gelie <jonathanx.gelie@intel.com>
If the buffer given to hci_cmd_done() is not from the command buffer
then using the cmd(buf) macro is not valid. Simply bail out from
hci_cmd_done() if this is an event that didn't have a matching command
buffer.
Change-Id: Id8357a23a307f4ef3a9214a4e1f7d853a18cb907
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The controller code should not use BT_ASSERT directly.
Change-Id: If0b7d8e21d2ab4569a564bd03e36e4eb9204c595
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
It is not used outside of sdp.c and has no declaration.
Change-Id: I420a6b98d1b46fedffa29d042267b9c606d04c46
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
'buf' variable of type struct net_buf was one of the arguments for
finish callback in response to each AT command sent. 'buf' variable
not used in that function. So removed 'buf' variables from the argument
list.
Change-Id: I7d6aa6082f524012ae13a04426915076130ddf69
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
Subscribe value is set to zero before calling notify callback,
to distinguish a subscription failure from an unsubscription
on disconnection (when flag BT_GATT_SUBSCRIBE_FLAG_VOLATILE is set).
Change-Id: Ia91220492d82041b2c385bf88a15180387e7a483
Signed-off-by: Jonathan Gelie <jonathanx.gelie@intel.com>
If found error during service level connection disconnect rfcomm.
Change-Id: Ida425375975b8d60ab1024d07a8ffe7745ae0b54
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
Some application protocol required non-persistente subscription
across connection even in bonded case.
Flag BT_GATT_SUBSCRIBE_FLAG_VOLATILE specify if subscription
must be remove during disonnection.
Change-Id: I1bc2bbbb4bc86f58905e44a7eb267ca0871f2fdb
Signed-off-by: Jonathan Gelie <jonathanx.gelie@intel.com>
The subscriptions callback may free or reuse the subscription so all
instances that where this could happen need to safely fetch the next
element which is why this changes switch to use sys_list_t as it has
SYS_SLIST_FOR_EACH_NODE_SAFE.
Change-Id: I37d51f27116ea0c057b560924a9416676477597b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Once the service level connection is done call the connected
callback.
Change-Id: I7541e221d4c03c939682ec70f1d9c093f87ceb09
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
We can go further with taking advantage of k_poll and merge the
connection TX thread together with the HCI command thread, thereby
saving even more memory.
Change-Id: I1792056fd4621d62c7cd05929094033acca45c74
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Now that the k_poll API is available we can use it to have single
connection TX thread instead of multiple ones, which helps reduce the
per-connection memory overhead by a substantial amount.
Change-Id: Icb5d4da87cf0d660bba8da43186d1e76f41c825a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Removing the module specific buffer pool. If future, use common acl_tx_pool.
Change-Id: Ie1452f981ef43642715be395315845cc2d9bb285
Signed-off-by: Arun Jagadish <arun.jagadish@intel.com>
Detaching the timeout from the tx_thread lets us prepare for merging
all TX threads into a single one with the help of k_poll(). There's no
need to define a new delayed work object since the existing connection
parameter update object and connection timeout will never need to run
in parallel. Additionally, but some CONFIG_BLUETOOTH_CENTRAL guards to
void pulling in unnecessary code when Central role is not enabled.
Change-Id: Ia1f222aa052edcecd484a924f2d9a63a3b8fd11f
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Reduce the pressure on the common RX buffer pool by reusing HCI
command buffers also for the Command Status or Command Complete
response to them. This also implies removing the existing Kconfig
variable for the command buffer sizes since the size is also dependent
on maximum Command Complete event sizes. Instead, reuse the RX buffer
size also for HCI Command buffers.
Change-Id: I006b287d64a0c9ca40de741aa9a424a49a927385
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
With an upcoming patch the HCI command buffers will be reused for the
Command Complete/Status HCI events. The controller HCI code needs some
refactoring to postpone the event buffer allocation so that the
parsing state of the HCI command buffer isn't touched.
Change-Id: I1f614fb9f02ed1886ca84198fbc8c64abc29e44f
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
A subsequent patch will start reusing HCI command buffers for
receiving the response, so the distinction of received vs sent data
headroom would just make the code unnecessarily complex. Instead, just
merge these two variable into a single one.
Change-Id: I31d846331939f1a2270df7ed0c75112825e16493
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The C pre-processor doesn't allow using sizeof() in comparisons such
as "#if FOO < sizeof(bar)". To make it possible to use such
comparisons where the sizes of headers are involved, introduce helper
macros for the headers instead of always having to hard-code magic
numbers into the code.
Change-Id: Iaf654cb4aaa49e83360901f5b01225ba4b952854
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If the driver send() fails we need to free up bt_dev.sent_cmd.
Change-Id: I41b6293dfe09f1d94d7f85663ddbebed40cf6e90
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Adds API to allow user get SupportedFeatures attribute ID.
Jira: ZEP-1112
Change-Id: I91a1bf548d99c5c7cc75682aed19e89390350533
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Adds API to get available specific information included in protocols UUID
tree during parsing Protocol Descriptor List attribute. Usually it's to
be remote Server Channel/PSM number operating on applicable protocol.
There're a few helper functions added to be able parse and retrieve such
information from raw record data.
Jira: ZEP-1112
Change-Id: I736a780b95ba54821d36e6011b739f5ff37cd64f
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Both all-zeroes and all-ones addresses are invalid. Fix the check for
this so that we fall back to a static random identity address when
needed.
Change-Id: I17cf903e0f3ed321311d86d09bed19343c2c801a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This will reduce memory consumption by 23 bytes per session.
Change-Id: I1831b59881eaefb68f93c30e298b8f97d63c7428
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Session idle timer should not be started in dlc destroy if
session is already disconnected (which can happen in scenarios
like acl disconnection where in dlc is detached from session and
destroy will be called from tx thread) otherwise timer function will
get invoked for a disconnected session.
This patch moves starting of idle timer from dlc destroy to
the point dlc disconnect is recieved from remote since idle
timer is to handle only that scenario.
Change-Id: I94501515a182ff0e2348ba4e2df63100f2f52209
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
The nRF5x come preprogrammed from manufacturing with either a public or
random static BLE address in the FICR register. Use the random static
one when present instead of generating one during Bluetooth
initialization.
Change-id: Ic733cb926e0414e56d6f8be65b033692e914b72a
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The hci_raw version of bt_buf_get_rx was expecting an int for timeout.
Let us int32_t instead so we match both the hci_core version and the
type that net_buf_alloc expects.
This addresses a possible build issue if/when int32_t differs from our
default (ie, newlib).
Change-Id: I69374c48da8f2b96fa2bd418ff505fbaacda11f0
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Change BREDR_NAME to DEVICE_NAME so it can also be used as the LE
device name.
Change-Id: I9ef55d9dff098372d47d9d5754ad7a7163a65bc0
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Added structure definition for stream end points
and the a2dp stream.
Change-Id: I6d0cc08611f5179397bea6200eb9244d7c1cc8d6
Signed-off-by: Piyush Itankar <piyush.t.itankar@intel.com>
Fixed channels don't really use channels state as they don't need
connection setup.
Change-Id: Ie8b1327db0269a45e9ccb6049f8dda87aa445fb5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Adds state callback handler to allocate memory to AVDTP on an incoming
connection. Also, abstracts searching of free session as a function call.
Change-Id: Idee6b7a0507b0b75c0007717e351ca12de0cb5be
Signed-off-by: Piyush Itankar <piyush.t.itankar@intel.com>
This is mainly for backward compatibility with 1.0b devices and for
spec compliance. CFC is mandatory post 1.0b spec where in MSC FC
shall not be used.
FC bit in MSC is used to manage the flow control. If FC is 1 then
the device is unable to accept frames.
Implementation is done by reusing "tx_credit" as a binary semaphore
wherein it will be blocked if MSC is recieved with FC bit 1 and
unblocked if FC bit is 0. Once tx thread is scheduled then semaphore
should be always available until all the buf in queue is sent.
Change-Id: I91181668ec0f46ff0b02905dd97e4503fc1fa7a7
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
v24_signal in MSC response should be the copy of it received
in the command.
Change-Id: I9723ba182bf5911025c7a57220cd70687ca785f3
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
This implemnts the feature to handle the unsolicited response
received from the AG. In the hfp_hf.c file the unsolicited_cb function
process it.
Change-Id: I3ca6c8d4a1522d02f7160e2fe4ae1598cd93ce7e
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
Convert driver to use the CMSIS NVIC APIs rather than the internal
ones so we can remove them in the future.
Change-Id: Ib9fe696e8d5e55f60865d3fd958a035135ce517a
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
For combined builds with Controller+Host the Controller's HW RNG is
used instead of TinyCrypts PRNG.
Change-Id: I4dbe85e547c057cf57ae0934b10866f2bb9f610d
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In case the channel provides its own MTU and allocator it should be
able to store as much data as set in the MTU, based on that the code
can give enough credits to fill the entire channel MTU.
Change-Id: I291cf1bb643f200bde191914e814f681f4f65c3e
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Added pointer to store the callback function
from the application in the Request structure.
Added userdata param, to be used to fill AVDTP resp.
Change-Id: I8f3289545fdbbd91e4ed7f9983f4f4331d9b59a6
Signed-off-by: Arun Jagadish <arun.jagadish@intel.com>
This makes l2cap_chan_add updates the state to CONNECT so it doesn't
have to be done manually for both incoming and outgoing code paths.
Change-Id: I7331e49c675c83c6c1b184eeecc49c75c446a1ff
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Try to use IS_ENABLED instead of #ifdefs whenever possible.
Change-Id: I330769204914286bb98583dd89a3d849d4fcc128
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Try to use IS_ENABLED instead of #ifdefs whenever possible.
Change-Id: I77d2e53f7aa7f2832513f235a63ad2cf14e73cb1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Try to use IS_ENABLED instead of #ifdefs whenever possible.
Change-Id: I78a3ccc6fcb84b431198f1a6c46aa6d50e9e9cd1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Try to use IS_ENABLED instead of #ifdefs whenever possible.
Change-Id: I4da93076a27a33b15a9b9119cfe5a1ff68acba0b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The new IS_ENABLED macro allows exposing conditionally enabled code
always to the compiler, even though it may not ultimately end up being
built. This is in particular useful for letting the compiler catch any
logging format string errors. Introduce a new BT_DBG_ENABLED macro
that c-files need to define before including <bluetooth/log.h> in
order to choose whether BT_DBG() logs are enabled or not.
When no Bluetooth logs are enabled the patch also modifies the log
macros to have the format strings checked with the help of the
__printf_like annotation and empty static inline functions.
Change-Id: Ie6bc8e10727b5b306f3ed0f94089a07a22583d9b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Introduce a new callback to bt_conn_cb that allows the application to
decide whether the accept or reject an incoming connection parameter
request. If the request is accepted the callback allows the
application to also adjust the values to what it thinks are more
appropriate.
The Zephyr Bluetooth API allows multiple registered connection
callbacks, so in principle there may be multiple le_param_req()
callbacks. It's recommended for an app to just use one (for clarity),
but if there are multiple the app is responsible for managing
potentially different requirements. In the case of multiple callbacks
each callback will receive the modified parameters in case a previous
callback modified them.
Jira: ZEP-1474
Change-Id: I098db5791aac521f1edfa9fefdf847db0a27e3a5
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The BT_L2CAP_RX_MTU is counted starting with the BLUETOOTH_RX_BUF_LEN
variable, which doesn't include the BLUETOOTH_HCI_RECV_RESERVE
contribution (this would only be valid if we started subtracting from
BT_BUF_RX_SIZE).
Change-Id: I1ab3eaf8907946c56c2a9fe16b2074f3a3027a0f
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
BT_BUF_RX_SIZE is used for the RX buffer pool which is used for both
ACL data and HCI events. It should therefore not contain any
ACL-specific details. This patch removes the ACL header size from the
macro and instead makes taking it into account the responsibility to
the Kconfig option. Since buffer sizes are anyway rounded up to the
nearest multiple of 4 the default goes up from 70 to 76.
Change-Id: I41274d9131e7529d41c16bd66de95637fb150a29
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
CONFIG_BLUETOOTH_RX_BUF_LEN shall not be used as RX MTU since it doesn't
account for ACL and L2CAP headers.
Change-Id: Ic3ebb4bd13d86a39174840f0ab625b66e863018a
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This is mainly for backward compatibility with 1.0b devices and for
ICS & spec compliance. CFC is mandatory post 1.0b spec where in
Aggregate FC shall not be used.
Aggregate FC is managed using FCOFF and FCON messages. This is for
the entire session which means that all the dlcs in that session
will be affected.
Implementation is done using binary semaphore wherein it will be
blocked when FCOFF is recieved and unblocked in FCON.
Once tx thread is scheduled then semaphore should be always available
until all the buf in queue is sent.
Change-Id: Ibfd2c4d033cef64c238ead83474f9e171572de1e
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Bluetooth Core Specification v5.0, Vol 2, Part E, 7.8.12:
"The Supervision_Timeout parameter defines the link supervision timeout
for the connection. The Supervision_Timeout in milliseconds shall be larger
than (1 + Conn_Latency) * Conn_Interval_Max * 2, where Conn_Interval_Max is
given in milliseconds."
Let's remember that:
conn_interval is given in units N * 1.25 ms
sup_timeout is given in units N * 10 ms
sup_timeout_ms > (1 + latency) * (conn_interval_ms * 2)
yields:
sup_timeout_n * 10 > (1 + latency) * (conn_interval_n * 1.25 * 2)
yields:
sup_timeout_n * 10 > (1 + latency) * (conn_interval_n * 2.5)
yields:
sup_timeout_n * 4 > (1 + latency) * (conn_interval_n)
Change-id: I30ac1d375a1baaa3e61f4c29b1165110599e1f7c
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This reduces stack pressure a little bit, and also paves the way for
introducing an application callback for accepting an incoming
connection parameter update request.
Change-Id: Ib02c14e27cbe34f85d663f36abd0597683ae1dc1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When receiving notifications we should be properly matching against
the remote address of subscribed peers.
Change-Id: Ibcba1101aac418fd02f9068667f84e8294aade07
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There are no users of this API and no (currently) envisioned use cases
for it. Remove it for now - it can always be brought back later if
there's a need for it.
Change-Id: I6530e096e3671c844a3f7dea8856147ffc716d71
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Rename the elements of 'enum at_cmd_type' in order to follow the
name spacing. Which should have prefix of 'AT_' for each elements.
This patch also involves the renaming, corresponding handler
function of 'enum at_cmd_type' with prefix 'at_' i.e 'cmd_start' as
'at_cmd_start'.
Change-Id: I722a25954163c06e131b94042c6a18e1e3458f6e
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
Rename hci_le_rand to bt_rand and make its parameter types compatible.
This also includes updating rand_get() to use size_t instead of
uint32_t & uint8_t.
Change-Id: I4d434dfbbaf339b1bc7b451d358d07a291dd0375
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The controller bt_rand() ties into the hardware which uses less memory
and is more power-efficient than using the TinyCrypt PRNG.
Change-Id: I7570d18f3e84dae3d5c2d3322b5d37cd3e8f3b6b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Having TX buffers split into numerous pools has the downside of
increased memory consumption. This patch takes the initial step to
consolidate these pools into a single one, saving about 248 bytes of
RAM for a basic configuration.
Change-Id: I449ba18b44a9a6af68e9a2c44f19a9286eb88b14
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Uses sys_slist_get function to get node and automatically, if valid,
remove one from the list.
Change-Id: I4cee6fbb064bf9644efdb7e6771e702b1f08678a
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Fixes not supported now format specifier.
Change-Id: Ia01ea3fd18acfeed6f4a3899334911dac1b76643
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
It's possible for the Public Key to be available by the time that the
bt_hci_cmd_send_sync() returns, so we need to make sure the flags have
the right values no matter what.
Change-Id: I053093b6611af360f52b14ddca50d409388f9475
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
As per the spec, the station which disconnects the last dlc
should disconnect session also. In case if remote does not
do it we need to disconnect otherwise rfcomm will be connected
without any dlc. So this starts an idle timer to handle the
above scenario.
This also starts a disconnect timer to handle in case remote
does not respond to session disconnect request.
Change-Id: I3b45aa5bf4c35fd81dc10974f2b0b6d4cfe4ea7d
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Rename cind_status_handle_values to ag_inidcator_handle_values.
Because the same function will be reused internally for +CIEV
Callbacks.
Change-Id: I875064de17700d72ea89dbbe0f5cb6554c813a5e
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
Reset AT and COMMAND state to process unsolicited response received
after processing result recieved for AT command sent to AG.
Change-Id: Id2a5827ce5b098336291696157027699479478cf
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
Confirmation callbacks needed not be registered with AVDTP
during A2DP initialization
Change-Id: I2cdf8c5a283775e49fa6e7e9404024e26d05a767
Signed-off-by: Piyush Itankar <piyush.t.itankar@intel.com>
This basically implements timer for connection and disconnection.
Conn timer will be started when dlc is initialized and stopped
when it is connected. Authentication if any, will be also included
in this timer.
Disc timer will be started during disconnect initiation.
Change-Id: Ia4b74e478fefa42db21aef528e623a24c72ddf7f
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Moves rfcomm_send_disc() and rfcomm_session_disconnect() to call it
while doing timer implementation.
Change-Id: I5805d31fb45181193385f055716c8518d68cc4a1
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Adds more descriptive comment to the code responsible for handling no
resolved UUID case.
Jira: ZEP-1112
Change-Id: I1af07949e19246d51bab9df05504a90f5fb22bb2
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
User may want to know when getting called user UUID callback handler
on what UUID the result data was retrieved from server.
Jira: ZEP-1112
Change-Id: Iabb2dbdf0f3cfdb24244e052f094c7549164b199
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
In order that host can continue a connection event by
enqueuing packets, the number of completed packets event
needs to be generated as soon it arrives on air. Hence, the
Controller now calls the radio_event_callback on every radio
Rx complete ISR.
The callback executes at the Radio ISR priority, take care
to only do as little as necessary in the callback, say, just
a semaphore give to wake up the hci_driver's thread.
Change-id: If48afd0f1390d450bc1e7ec66f1c9fd45208d9a4
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
For the host to be able to block on the recv_thread while waiting for a
number of completed packets HCI event, those are pulled from the radio
in a new, higher priority thread that also schedules the execution of
the lower priority event/ACL data recv_thread.
Change-id: I9d356bd297d0504cb16a032fb5fe5530693546e2
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
net_buf shall not be used with k_fifo since net_buf_unref will assume
unused bytes in the beginning are actually fragments causing it to
unref them as well.
Jira: ZEP-1489
Change-Id: I5ce420de73b245dc20eb15ea4d8d0b6ba346e513
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Since callers of bt_recv() have so far anyway been required to know in
which context to call it (based on e.g. bt_hci_evt_is_prio) it's
cleaner to have two separate APIs: bt_recv and bt_recv_prio.
Change-Id: Icd0d9aed9c51ffd2def31432c4ffcc16a9f13ccd
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The recent redesign of the H:4 HCI driver means that the smallest
safest RX buffer count goes down to 2. Default is left at 3 however to
get a bit better performance.
Change-Id: I879c7bd3a769f973dfb9bd179d196ab91f9d2abe
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Advertising reports are the only HCI events which we can drop if we
are low on buffers. Allocate them therefore with K_NO_WAIT rather than
K_FOREVER.
Change-Id: I0b7c92647f9be54b8746da837037725f8161a452
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Since the controller already uses a thread for receiving data it makes
sense to enable the BLUETOOTH_RECV_IS_RX_THREAD option.
Change-Id: I927b20c1a0afaea8d000df28cc220a69ae817d59
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The controller uses K_FOREVER for the allocations so there's no
benefit in trying to use specialized pools (which exist to try to
guarantee availability of buffers for critical data).
Change-Id: I130f2c44a2f28af1284290e6a0b17dcba438862f
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Allocate the event buffers after the ECDH operations rather than
before them. This way we don't hold on to the buffer for potentially
multiple seconds while the buffer could be used for other things.
Change-Id: I0fcc34ec4bea2265b7df3c1de3587c2a850c974e
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There's no need to use the type-specific helpers since those anyway
map to the same pool.
Change-Id: I74750f545c989bb921abca58166fe591ed325856
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Give more sensible values when RECV_IS_RX_THREAD is configured.
Change-Id: I40b5bd88213d224cc29f63fccef6cecee5868f77
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The separate ACL & event pools will soon be removed, and it's already
now convenient to have a generic API when the exact type of the
incoming packet is not yet known.
Change-Id: I84cb65d17ea69ebeaeb21532fbf76689e4fb59a0
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The controller doesn't support this feature and the only driver that
was needing it (h4.c) will be converted not to rely on it in the next
patch.
Change-Id: Ia514b79b6d05aa128768c2355353b7797e8b8977
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add support for using the context bt_recv() is called in as the RX
thread, rather than having a separate host-side RX thread.
Change-Id: I256bfe5dece5272c816f2292e58747553189963d
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Refactor the bt_recv() logic to make it easier to insert #ifdefs to
remove the RX queue and thread when the context calling bt_recv()
itself is sufficient enough.
Change-Id: Ie8c5a4dfe9533a4464a2e4909c94d3e1b185b55b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If the controller doesn't need ACL host flow control it may want to
optimize and use a single pool for incoming data.
Change-Id: Iec2a69bd2d7a127c7329d0423ab5ce6b73cb9904
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This option has not been used so far and will only contribute
unnecessary complexity in subsequent patches that introduce a concept
of combined RX buffers.
Change-Id: I53e0ce5155eebc352b84ba41b30ecb9d9958699f
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
After getting whole UUID response for SSA PDU request the user can be
informed about discovery results. Result data feeding the user is
splitted to logical record chunks if more than one record was found.
Every such portion represent unparsed SDP record prestripped from record
length. Each response record data passed to user starts from first raw
attributes data and the record response buffer's length tells exactly
about each record length. User UUID callback handler's return result
can drive delivery (dis)continuation of every such portion to the user.
Jira: ZEP-1112
Change-Id: Icec518ca7bab3c8dfef4a966d98e9d9004894bcc
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
This analyzes the dlc stack using stack_analyze() which is coming
as 188 with BLUETOOTH_DEBUG_LOG off.
dlc stack (real size 320): unused 68 usage 188 / 256 (73 %)
So increase the stack size to 256.
Change-Id: Ie5d5f267f4f618747551f0bfd0e05ffb47e0bb91
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
When getting very first SSA PDU response for given UUID we can extract
from it the counter telling us how much data will be delivered by server
to collect all complete response for given UUID. Let's use that
information to check if the room allocated by app is big enough for
collecting resolved data.
Jira: ZEP-1112
Change-Id: I91515da668d89e05755d64e427dee0936bf20323
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
skip_whitespace() API name is changed to skip_space(). Where the
skip_space function is to skip only SPACE(ASCII Dec: 32).
Change-Id: Ib28ffa45295912505bc27a986803ed0ae2b0002c
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
Rename the API's with 'list' which uses the term 'stream'.
For example 'at_open_stream' is renamed to 'at_open_list' and
the same applies for other API's which uses 'stream' in it.
Change-Id: I62bed70de3d85cd4890b10e04eba27ae2de1907c
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
The private_key parameter to generate_keys is supposed to be 32 bytes
in size, i.e. an array of 8 uint32_t variables.
Change-Id: Ia891fd68bfd8662983b898084e5a8524b7a9b8e2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Adds driven by user params buffer location to be populated by UUID
resolved data. Corresponding handlers responsible for connected and
disconnected states of L2CAP transport channel used by SDP PSM traffic
automatically allocates and unrefs such memory. Data receiving handler
performs buffer fill up.
Jira: ZEP-1112
Change-Id: I8aa97e6e69344dca0f241a4e9097acac75e14a7c
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Adds two extra checks against invalid length of attribute payload
frame.
Jira: ZEP-1112
Change-Id: I089442a5b9631471f9f394860681f1483e021c43
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Iterates all UUID params list delivered by user. When iteration finish
release SDP client L2CAP transport channel.
Jira: ZEP-1112
Change-Id: I0602e32a5296a05719ad1385b4aff537350b3e7d
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
This commit introduces a very light-weight and lock-less
scheduling of the Controller's deferred function calls
called the Mayfly.
Earlier work implementation used in the Controller had an
O(n) to schedule a function in a linked list that used IRQ
lock during modification of the linked list in the
Controller's ISR executions.
Mayfly is a compile time configurable matrix of queues
where an execution context-safe queue exists between two
execution context, one being the caller and the second
being the callee. Callee(s) are run in a software interrupt
but can also be run in an OS thread.
There are minor clean ups too in this commit related to
folder structure.
Change-id: I5ff44dcee6679d2f5ce9e8437d98d6c868782f3d
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Enable connection encryption setup in 3 connection
intervals. Peripheral will respond to Encryption Request
with Encryption Response in the same connection interval,
and also, will respond with Start Encryption Response PDU in
the 3rd connection interval, hence completing encryption
setup in 3 connection intervals. Encrypted data would be
transmitted as fast as in 3rd connection interval from the
connection establishment. Maximum CPU time in Radio ISR will
increase if this feature is selected.
Change-id: I16f2863fc2aaed624826505739519d4de1ac44c5
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Add Kconfig configuration to select Tx buffer size, this
value will be returned in the HCI LE Read Buffer Size
command response.
This configuration will allow lower Tx RAM usage when
larger PDU sizes are desired in Rx direction only.
Change-Id: I5106a448d78a0754c4b0f6fa61fd5dcacd87a67c
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Add Kconfig configuration and conditional compilation of
RSSI measurement during a connection.
Change-id: I5a2f23f76a7cbbd9569d53d31899a472bf39d3ee
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Add Kconfig configuration to conditionally enable Data
Length Update procedure support in the Controller.
This will save CPU time, flash and RAM, if this feature is
not desired.
Change-id: I4515c0c7cf9aeb333a289397ae3c9bac04a08e4e
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Add additional conditional compilation of code not needed
when LE Ping is disabled in Kconfig.
Change-id: Idab40b1371488e06a6f2009fb553f7655b7b86f3
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Adds initial handling of SDP Service Search Attribute response PDU.
Currently attributes data are not collected. Main focus was done on
proper handling PDU continuation state to be able receive whole
requested SDP record(s) if found for given UUID.
< ACL Data TX: Handle 74 flags 0x00 dlen 24
Channel: 64 len 20 [PSM 1 mode 0] {chan 3}
SDP: Service Search Attribute Request (0x06) tid 1 len 15
Search pattern: [len 5]
Sequence (6) with 3 bytes [8 extra bits] len 5
UUID (3) with 2 bytes [0 extra bits] len 3
OBEX Object Push (0x1105)
Max record count: 65535
Attribute list: [len 7]
Sequence (6) with 5 bytes [8 extra bits] len 7
Unsigned Integer (1) with 4 bytes [0 extra bits] len 5
0x0000ffff
Continuation state: 0
> HCI Event: Number of Completed Packets (0x13) plen 5
Num handles: 1
Handle: 74
Count: 1
> ACL Data RX: Handle 74 flags 0x02 dlen 68
Channel: 64 len 64 [PSM 1 mode 0] {chan 3}
SDP: Service Search Attribute Response (0x07) tid 1 len 59
Attribute bytes: 48
Continuation state: 8
cd 91 5a 58 30 00 00 00 ..ZX0...
< HCI Command: Host Number of Completed Packets (0x03|0x0035) plen 5
Num handles: 1
Handle: 74
Count: 1
< ACL Data TX: Handle 74 flags 0x00 dlen 32
Channel: 64 len 28 [PSM 1 mode 0] {chan 3}
SDP: Service Search Attribute Request (0x06) tid 2 len 23
Search pattern: [len 5]
Sequence (6) with 3 bytes [8 extra bits] len 5
UUID (3) with 2 bytes [0 extra bits] len 3
OBEX Object Push (0x1105)
Max record count: 65535
Attribute list: [len 7]
Sequence (6) with 5 bytes [8 extra bits] len 7
Unsigned Integer (1) with 4 bytes [0 extra bits] len 5
0x0000ffff
Continuation state: 8
cd 91 5a 58 30 00 00 00 ..ZX0...
> HCI Event: Number of Completed Packets (0x13) plen 5
Num handles: 1
Handle: 74
Count: 1
> ACL Data RX: Handle 74 flags 0x02 dlen 68
Channel: 64 len 64 [PSM 1 mode 0] {chan 3}
SDP: Service Search Attribute Response (0x07) tid 2 len 59
Attribute bytes: 48
Continuation state: 8
cd 91 5a 58 60 00 00 00 ..ZX`...
< HCI Command: Host Number of Completed Packets (0x03|0x0035) plen 5
Num handles: 1
Handle: 74
Count: 1
< ACL Data TX: Handle 74 flags 0x00 dlen 32
Channel: 64 len 28 [PSM 1 mode 0] {chan 3}
SDP: Service Search Attribute Request (0x06) tid 3 len 23
Search pattern: [len 5]
Sequence (6) with 3 bytes [8 extra bits] len 5
UUID (3) with 2 bytes [0 extra bits] len 3
OBEX Object Push (0x1105)
Max record count: 65535
Attribute list: [len 7]
Sequence (6) with 5 bytes [8 extra bits] len 7
Unsigned Integer (1) with 4 bytes [0 extra bits] len 5
0x0000ffff
Continuation state: 8
cd 91 5a 58 60 00 00 00 ..ZX`...
> HCI Event: Number of Completed Packets (0x13) plen 5
Num handles: 1
Handle: 74
Count: 1
> ACL Data RX: Handle 74 flags 0x02 dlen 19
Channel: 64 len 15 [PSM 1 mode 0] {chan 3}
SDP: Service Search Attribute Response (0x07) tid 3 len 10
Attribute bytes: 7
Continuation state: 0
Combined attribute bytes: 103
Attribute list: [len 99] {position 0}
Attribute: Service Record Handle (0x0000) [len 2]
0x00010001
Attribute: Service Class ID List (0x0001) [len 2]
UUID (3) with 2 bytes [0 extra bits] len 3
OBEX Object Push (0x1105)
Attribute: Protocol Descriptor List (0x0004) [len 2]
Sequence (6) with 3 bytes [8 extra bits] len 5
UUID (3) with 2 bytes [0 extra bits] len 3
L2CAP (0x0100)
Sequence (6) with 5 bytes [8 extra bits] len 7
UUID (3) with 2 bytes [0 extra bits] len 3
RFCOMM (0x0003)
Unsigned Integer (1) with 1 byte [0 extra bits] len 2
0x09
Sequence (6) with 3 bytes [8 extra bits] len 5
UUID (3) with 2 bytes [0 extra bits] len 3
OBEX (0x0008)
Attribute: Browse Group List (0x0005) [len 2]
UUID (3) with 2 bytes [0 extra bits] len 3
Public Browse Root (0x1002)
Attribute: Bluetooth Profile Descriptor List (0x0009) [len 2]
Sequence (6) with 6 bytes [8 extra bits] len 8
UUID (3) with 2 bytes [0 extra bits] len 3
OBEX Object Push (0x1105)
Unsigned Integer (1) with 2 bytes [0 extra bits] len 3
0x0100
Attribute: Unknown (0x0100) [len 2]
OBEX Object Push [len 16]
Attribute: Unknown (0x0303) [len 2]
Unsigned Integer (1) with 1 byte [0 extra bits] len 2
0x01
Unsigned Integer (1) with 1 byte [0 extra bits] len 2
0x02
Unsigned Integer (1) with 1 byte [0 extra bits] len 2
0x03
Unsigned Integer (1) with 1 byte [0 extra bits] len 2
0x04
Unsigned Integer (1) with 1 byte [0 extra bits] len 2
0x05
Unsigned Integer (1) with 1 byte [0 extra bits] len 2
0x06
Unsigned Integer (1) with 1 byte [0 extra bits] len 2
0xff
Jira: ZEP-1112
Change-Id: Ie282782fba6ef06c6826b3e624f83c8f4c94ebbe
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
The following readings were obtained after running the peripheral and
central_hr apps in qemu combined with the controller (hci_uart) on nRF51
and nRF52:
Main Stack 380
Idle Stack: 68
ISR stack: 532
Controller RX Stack: 388
HCI TX Stack: 516
The numbers set in this change provide a safety margin from the ones
measured empirically.
Change-id: Ice7ad7f081502e0ea1accf856a7937c0bf0783b2
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
reserve parameter of bt_l2cap_create_pdu() is incorrectly passed
as timeout.
Change-Id: Ieed293f52c2e98f16f1e43c498140178703236db
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
For consistency with RX_STACK_SIZE and the rest of stack sizes, rename
to use the normal naming scheme.
Change-id: Ib8d484482466fa8d629e6329e07b927abdd6f598
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add Kconfig configuration to conditionally enable LE Ping
feature in the Controller.
This will save CPU time, flash and RAM, if this feature is
not desired.
Change-id: I5fbbdbe8f45ac01c9b0d7b11e002a0d1db4d272e
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
The data pointer and length was not updated before invoking the
write_rsp function therefore providing pointer to the handle.
Change-Id: I5c27ab7a793979dffb8f1f2c68def027c45f2376
Signed-off-by: Louis Caron <louis.caron@intel.com>
This should also have been net_buf_add_mem(). Otherwise the buffer
gets corrupted.
Change-Id: I4687584777f446d398182c3e8c2cde5946987da4
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Move code that can be executed after radio tx/rx packet ptr
has been assigned in the radio h/w.
Change-id: I9c5a34ee6bb74c1265d7871bcdf93894e3e7b190
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Added code to profile radio ISR execution time and generate
an event, which can be used to populate a vendor HCI event.
This event and associated code is disabled, subsequent
patch will add kconfig to enable it.
Change-id: Ic3fa3e0f4e36829a22a25ffee039949eaae561a7
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Use BT_WARN instead of BT_ASSERT to display unknown rsp in
HCI layer.
Change-id: I63c792468d9c4768f69df73395ee026a03521704
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Peer controllers not supporting LE Ping feature will
respond with unknown response PDU, handle it internally in
the controller rather than exposing it to HCI layer.
Discovered that controller was passing the unknown rsp PDU
to HCI layer when LE Ping was send to Nexus 5.
Unknown response for slave feature request was forwarded to
HCI layer, during that implementation unknown rsp for LE
ping too was getting forwarded to HCI layer.
Change-id: I4396c482e5546d78239cf41d88728de996e48d7d
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
This call was supposed to be net_buf_add_mem().
Change-Id: I5e4a718474905c433533fd1c1d7e8e0b7ff35739
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This helps simplify code that was previously combining net_buf_add()
with memcpy().
Change-Id: If44cf9cd651aba5e544e36567869f147468663eb
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Stops handle data if server responds with SDP Error PDU
Jira: ZEP-1112
Change-Id: Iaddb740f71fa86384753ab32956fc69b89faeea0
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Adds handler responsible for receiving SDP data on SDP client request.
For now simple validation are done on SDP response header data.
Jira: ZEP-1112
Change-Id: Ic6009030db34e26dfdbd57fa1b0a22f6e27b6a11
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
cid is uint16_t and L2CAP_BR_CID_DYN_END is 0xffff so doing
"cid < L2CAP_BR_CID_DYN_END" comparisong is always true resulting
in for loop not being terminated as expected. Check against cid
overflow instead. Code comment is also added for clarity.
Change-Id: I15d6d838ed8b731824e602d089d765614c96c6c1
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Resets SDP client session data on related L2CAP transport channel
disconnection state. Leave the channel itself reset to L2CAP layer.
Jira: ZEP-1112
Change-Id: I4d8a8f10908f5e599ba6506470b98508869cb21b
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Makes possible to append user UUID to context to be able later iterate
it on subsequent resolving process.
Jira: ZEP-1112
Change-Id: I193ff1cee199045c9686dc4ca200adf19db377e4
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Renames and refactors helper get_client_session to sdp_client_get_session
to follow existing naming convention and adds second helper creating
new SDP client session. Then simplifies using them the API implementation.
Jira: ZEP-1112
Change-Id: I6b919f521e6665a7117fa06208b3fa2ae5f77fda
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Peer sends Remote Port Negotiation command to set port
communication settings. Currently we accept all the settings
sent by remote.
If there is only one value byte in the request then current
port settings has to be returned for which we returns the
default settings defined in ETSI.
Note that RPN may be sent even before a dlc is opened.
> ACL Data RX: Handle 256 flags 0x02 dlen 18
Channel: 64 len 14 [PSM 3 mode 0] {chan 0}
RFCOMM: Unnumbered Info with Header Check (UIH) (0xef)
Address: 0x03 cr 1 dlci 0x00
Control: 0xef poll/final 0
Length: 10
FCS: 0x70
MCC Message type: Remote Port Negotiation Command CMD (0x24)
Length: 8
dlci 10
br 3 db 2 sb 0 p 0 pt 0 xi 0 xo 0
rtri 0 rtro 0 rtci 0 rtco 0 xon 17 xoff 19
pm 0x3f7f
< ACL Data TX: Handle 256 flags 0x00 dlen 18
Channel: 64 len 14 [PSM 3 mode 0] {chan 0}
RFCOMM: Unnumbered Info with Header Check (UIH) (0xef)
Address: 0x01 cr 0 dlci 0x00
Control: 0xef poll/final 0
Length: 10
FCS: 0xaa
MCC Message type: Remote Port Negotiation Command RSP (0x24)
Length: 8
dlci 10
br 3 db 2 sb 0 p 0 pt 0 xi 0 xo 0
rtri 0 rtro 0 rtci 0 rtco 0 xon 17 xoff 19
pm 0x3f7f
Change-Id: I73b7d8577e7e2bc3e436f4db86a91e12db440f1f
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
rfcomm_make_uih_msg() only needs session to get the role while creating
msg. This is mainly done since some commands like Test and RPN may come
even before dlc is created.
Change-Id: Ifd5a2ceaf17c20db3f00604cd2b4f1759155123e
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
l2cap_br_conn_req_reply expects valid bt_l2cap_chan pointer but this
is achieved only on accept() callback. Use l2cap_br_send_conn_rsp
instead for rejecting cases where no channel was accepted. This also
makes success path being 'primary' function path ie erros all always
handled inside if() statements.
Jira: ZEP-1405
Change-Id: I890b4fcf029afce65eba4f2ebae0b1094feb007f
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Not all users are in an ISR context where we can't block, so give the
callers the freedom to choose if they want to block or not.
Jira: ZEP-1481
Change-Id: I19bd7e2df94c4eeb60886a17a78f872bd7bea887
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Adds validation check when 'sdp discovery' API is to be called
by client, to reuse existing connection if valid or initiate new one
if posssible to set SDP L2CAP link to remote.
Change-Id: I47ce33cb5e95cf2616f9b23712641b912ce40f37
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Added a Pending Request structure, this will keep
a track of the last sent AVDTP Singnalling Message.
This will be used to verify the response from the remote device
Memory will be allocated by the application.
Change-Id: Ic31df154b52ce9013e5039ab195a9651d1811a7a
Signed-off-by: Arun Jagadish <arun.jagadish@intel.com>
Adds for now stubs of handlers responsible for taking a connected and
disconnected state of SDP L2CAP channel.
Change-Id: I21b76b755168fb63f6cade5f6b0c0bab93d0a01f
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Adds basic functionality to be able to trigger establishing outgoing
L2CAP channel to remote using as PSM SDP channel. The number of such
outgoing connections is limited by configured pool of connections.
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Change-Id: Ie5428e5b1b5f5c57f473ee0adfd4621cd9fe6e3e
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
This patch contains API's which is used to parse range of values
eg. (0,3). This patch also parses the string, reads, process and
move the buffer accordingly.
Change-Id: I8dba5b7d630f65b87967c101557c5c7ffd297dd1
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
If more inquiry results were received during discovery than fits in
storage results with lowest RSSI will be skipped. This is to improve
API usefulness in busy environments where results with low RSSI (likely
more far away than high RSSI) could consume provided result space,
Change-Id: I1e9ca901b693f608d58575916809e8bd8bfe710f
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
at_get_number which converts the string into number now operates on
at_client to get the string buffer. This patch also improves API()
skip_whitespace to be operated on at_client. Also the the API's
get_cmd_value, get_response_string are updated to work with buf
increment.
Also in this patch the return type of the function str_has_prefix
is changed from 'int' to 'bool'.
Change-Id: Ia626e0d13212b84413cce0444349975f4abe1cf6
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
The execution time of k_sem_give() increased slightly recently, and
since it was being called from the radio ISR this had an impact in the
deadlines not being met.
This change moves the actual call to k_sem_give() to a lower-priority
job and thus out of the ISR to avoid its execution time affecting the
ISR's timing.
Change-id: I76c82df895c6daaffef52786b0c900ee15acb0aa
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The ECC emulation synthesizes its own HCI events so we may need up to
two available priority buffers at any point in time.
Change-Id: I88b37c7e9e9f64483d80cde9243470a7f0477321
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In preparation for the new Nordic MDK and nRF52840 IC support we switch
to using the SERIES config instead of the old "NRF52" macro that will be
deprecated in the new MDK.
JIRA: ZEP-1418
Change-Id: I563f025c9db9b7497116c5af23814d95c720f836
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
There are static initializer macros available for most kernel objects
which we should use whenever possible.
Change-Id: I496f4d05d26801eddd21fae53bdd4fcdc3246fe3
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This adds H7 function implementation and test based on sample data
from Core Specification 5.0 Vol 3. Part H. Appendix D.8.
Jira: ZEP-1431
Change-Id: I49d44ee7a352d1092f6379829d747c7e0ec5e83c
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Reduce the time limit for active clock startup and increase
the CPU usage time limit before hard real-time radio
transmit/receive.
Due to isr_wrapper overhead in ARM architectures, more time
was used before hard real-time radio transmission or
reception which was detected by controller implementation
and the controller aborted the radio transactions.
This commit permits more CPU utilization by the controller
before hard real-time radio transactions start.
Change-Id: Id976add80c70cabc753c43dfac6f6603588458d9
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
On CPUs like nRF51 which run at 16MHz, certain BLE control
procedure PDU processing take more CPU time than permitted
inside tIFS (150us). Current implementation of Data Length
Update procedure does not span over multiple connection
interval (unlike Encryption Setup, which is another control
procedure processing that would consume more CPU time)
hence taking more CPU time inside tIFS on nRF51.
During the radio ISR, the active clock and packet timer are
active and it is used to profile the CPU time taken which
is used to decide on whether there is sufficient time in
the current radio event to process the control packet.
This commit also fixes a potential bug that would cause
disconnection due to MIC failure on encrypted connections
that performed Data Length Update. Controller used to NACK
the request/response PDU if it was not in a state to resize
the receive buffers but did not reset the CCM counter. This
is now fixed by the change done to NACK control PDU based
on available CPU time in radio ISR.
Change-id: Id58322ad76a0dbc284738cdd9a7c0437c9e8c423
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
"next" is more relevant since its used to save next pointer
Change-Id: Ic0a8d543944681ba4291c5aa06125f565ab6115c
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
The function is not particularly small, and is used from several
places, so remove the inline declaration. This also prepares the way
for the possibility of having an application callback for letting the
application choose whether it's fine with the proposed parameters, and
thereby influence the response we send to the remote device.
Change-Id: I5848b179318b6fb6ee37fcbd479a919204f559f1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Now that all logging methods use printk as a backend the respective
Kconfig options should declare the right dependencies.
Change-Id: I65c759db0ec7ba6333b76d8d20aea0e374fd4947
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Since the user data size is now stored in the pool there's very little
value in storing it as well per-buffer.
Change-Id: I17a99123b232423c52a2179b4eccd813728d51b1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In order to keep the initialization process light-weight, remove
net_buf_pool_init() and instead perform the initialization of the pool
and buffers in a "lazy" manner. This means storing more information
in the pool, and removing any 'const' members from net_buf. Since
there are no more const members in net_buf the buffer array can be
declared with __noinit, which further reduces initialization overhead.
Change-Id: Ia126af101c2727c130651b697dcba99d159a1c76
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is only for use with custom destroy callbacks, so that the
application gets isolated away from the details of how exactly the
buffers are managed. This opens up the possibility of switching away
from k_fifo to potentially better solutions, such as k_lifo.
Change-Id: I0d8322fdec3500d8ae060ae471b9448aeaa4572a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Until now it has been necessary to separately define a k_fifo and
an array of buffers when creating net_buf pools. This has been a bit
of an inconvenience as well as blurred the line of what exactly
constitutes the "pool".
This patch removes the NET_BUF_POOL() macro and replaces it with a
NET_BUF_POOL_DEFINE() macro that internally expands into the buffer
array and new net_buf_pool struct with a given name:
NET_BUF_POOL_DEFINE(pool_name, ...);
Having a dedicated context struct for the pool has the added benefit
that we can start moving there net_buf members that have the same
value for all buffers from the same pool. The first such member that
gets moved is the destroy callback, thus shrinking net_buf by four
bytes. Another potential candidate is the user_data_size, however
right not that's left out since it would just leave 2 bytes of padding
in net_buf (i.e. not influence its size). Another common value is
buf->size, however that one is also used by net_buf_simple and can
therefore not be moved.
This patch also splits getting buffers from a FIFO and allocating a
new buffer from a pool into two separate APIs: net_buf_get and
net_buf_alloc, thus simplifying the APIs and their usage. There is no
separate 'reserve_head' parameter anymore when allocating, rather the
user is expected to call net_buf_reserve() afterwards if something
else than 0 headroom is desired.
Change-Id: Id91b1e5c2be2deb1274dde47f5edebfe29af383a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The Bluetooth thread stack sizes are optimized based on the assumption
that printk is used for logging and not printf. Using _prf() (the
printf backend) risks overflowing the stack, so use the recently
exposed _vprintk instead.
Change-Id: Ibcbe0af2994c83114d12aa27a8bc29c77bb8c4c8
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Now printk family from <misc/printk.h> already included should handle
BT_DBG() like expansion.
Change-Id: I5e03f786530e4bbbdb94a13a4cd77db580268c11
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Replace precision formatter (.) in printk with padding flag like %04x
since for now precision is not handled properly in printk family.
Change-Id: Ib63198e407ef584c5650d6452518b1767047630f
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
These should have been converted to using printk instead.
Change-Id: I62323704dad4fc51cc14ee4734acb6b325dcda14
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This will be used by the user to disconnect or cancel connect dlc.
This also defines an internal close function which will take
appropriate action based on the dlc state.
In case of user initiated disconnection if some pending packets are
there in queue then it has to be sent before sending DISC packet.
< ACL Data TX: Handle 256 flags 0x00 dlen 8
Channel: 64 len 4 [PSM 3 mode 0] {chan 0}
RFCOMM: Disconnect (DISC) (0x43)
Address: 0x2b cr 1 dlci 0x0a
Control: 0x53 poll/final 1
Length: 0
FCS: 0x6d
> ACL Data RX: Handle 256 flags 0x02 dlen 8
Channel: 64 len 4 [PSM 3 mode 0] {chan 0}
RFCOMM: Unnumbered Ack (UA) (0x63)
Address: 0x29 cr 0 dlci 0x0a
Control: 0x73 poll/final 1
Length: 0
FCS: 0x26
Change-Id: Ie4fa3bd8f6b279fee6fb56ddce198d82c5047849
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
When PSM server doesn't have BR/EDR L2CAP resources to assign and handle
incoming request properly, local channel pointer may stay uninitialized.
This fixes such scenario. The fix refactors main connection request
reply handler to additional helper which can be used to send response
unconditionally for situation when local channel is not allocated
to setup L2CAP link between.
Jira: ZEP-1405
Change-Id: I5caedd63a59ad0d1704ac87fa51616a0770320bf
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Instead of %4.4x we need to use %04x which printk supports.
Change-Id: I0564be5531bb266b328f77231f5d00f43eabe1ed
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If connection destination address has been changed update the addresses
stored by the time it disconnects since in case of RPA it is no longer
mapping to the same device after it has been disconnected.
Change-Id: I0ce966928f605a885125179eaa7b9093989825ab
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The connection destination address may change if the identity address
is resolved.
Change-Id: Id6f7b6494c24ff118043ba5f4ff54e254376eddf
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
bt_conn_lookup shall work both with identity address or initial
destination address as bt_conn may change the destination address with
the identity address.
Change-Id: Ibdd19ec453c3307eb6db188196b7e57a2260b526
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There's now snprintk available that's more light-weight on the stack
than snprintf.
Change-Id: I6b3e4409703ca92fe6b8f4146ff47c490ab826cb
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Applications may want finer control of the NRPA used for
non-connectable beacons, and provide it up-front rather than letting
the stack generate one.
Change-Id: I84d459372cc85ed09a8f9cde16dbb9b98dec2a43
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Expose helpers in hci.h for setting and getting the LE random address
type.
Change-Id: I7c6437051f0b2d1f5f79e19b2616bb643ae6300b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Fix compilation issues that show up if SYS_LOG is mapped to printk
instead of printf. Unlike printf, printk is annotated so that the
compiler catches incorrect format specifiers passed to it.
Change-Id: I4d6f635a0ed61de698727028ea8767dc0ef28bb1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Instead of having custom logic for determining the minimum of two
values, use the existing min() helper from misc/util.h.
Change-Id: I9809883d4a31126329373f293897dd49eb91e9ad
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
rfcomm_dlc_drop() can be used from many places to unlink dlc
from session and destroy it. So it is better to send DM
explicitly from relevant places.
Change-Id: I9b6a31ce5bb65b90510aa483539d4a201ba12b60
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
When the Controller is configured to support less than 251
as the supported maximum data length, missing check caused
the Controller to incorrectly re-initialize its rx buffers
causing assert during the DLE procedure. This commit fixes
the procedure to correctly use the supported maximum length
if the peer requests a transmit length that exceeds the
supported receive length.
Change-id: I6ad7196e3db44b303ddf2ec06e0ae579bf2eb774
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This allows to fine tune TX stacks size depending on selected HCI
driver. If needed it can be used to tune for monitor too or other
logging mechanism used.
Change-Id: Ib501921da0b786e151083760d85ec58fe3c08b60
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
If debugs are disabled scid and dcid variables were never read.
This also fix mixed values of scid and dcid in le_disconn_req.
Change-Id: I3b435dd0640c5c65ab5fe68e33dd25e3c9e0026e
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
subsys/bluetooth/host/hci_ecc.c: At top level:
subsys/bluetooth/host/hci_ecc.c:277:6: warning: no previous prototype
for 'bt_hci_ecc_init' [-Wmissing-prototypes]
void bt_hci_ecc_init(void)
^
CC subsys/bluetooth/host/conn.o
Change-Id: I920d8b6b66c82be932c579461310505c6d402c08
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Even one-line branches should have {}, and the last two return
statements can be simplified into a single one.
Change-Id: I0f65aeaba867240255eae8e1c461386700444ae6
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
With k_sem API it is possible to specify maximum sempahore value
so we no longer need to track semaphore count.
Change-Id: I86744ba63bd3207051ca3466d4f81b816d24f5ad
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Applications expect service end handle as attribute value in userdata
on discovery response callback.
Jira: ZEP-1354
Change-Id: I664da4a7e054a531ad1c2c8cbc74367cb679ff03
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Security needs to be elevated based on dlc required sec_level
before creating dlc. If L2CAP connection is not created then
setting dlc required sec_level to chan would do the job.
Change-Id: I21debd3559c9ccfb79011160d676932bc2a54604
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Correct the local LE supported features bitmap to actually "or"
together all the bits that correspond to the set of features that
are implemented at this time.
Change-Id: I0c62ec566c775514250fcf062aeef6c9656719e3
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
If the original buffer cannot be reused, either by no having enough
space for user data or if is fragmented, it can in fact be smaller than
both the segment buffer and MPS.
Change-Id: I59a537aff59c5d56b2883e9bd51f3a1a3932d348
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The segments need to be limited by the minimun of the segment buffer
tailroom and tx MPS not the original buf length.
Change-Id: I580a3bb61aa190ac0cdd3717bc06fd6e6e668304
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Implement the 2 HCI commands that provide ECC public key
and shared secret generation:
- LE Read Local P-256 Public Key
- LE Generate DHKey
Jira: ZEP-1246
Change-Id: I79388bfdb9f2e28b9377b4bb6ee2caca25f33f3e
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Handle the scenarios like ignoring a response in non existing dlc,
correctly handle if received a command with invalid mtu etc.
Change-Id: Ib0bce9134bac3a0dead03798f859af54873a70c1
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
k_sem_take return differ from nano_sem_take since it return 0 for
successful case instead of 1.
Change-Id: Ia39cd624d56dbc1c8e7f3558244bebf765da191d
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This is no longer needed after switch to unified kernel.
Change-Id: Ie1f8dadb3f2e43ae6ccfbfaf1f754196f3237471
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
After switch to unified kernel this is no longer needed.
Change-Id: If9877d3fa038dd873011fb780c7e767e150647ae
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This fixes defect found by coverity: 152027 Pointer to local outside
scope.
Change-Id: I50f196a04363ffa6e6654b71a9a1d89034580413
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Implement the 3 missing HCI commands required to support
Data Length Extensions:
- LE Read Suggested Default Data Length
- LE Write Suggested Default Data Length
- LE Read Maximum Data Length
Note: Only octets are actually used at this time, not time.
Jira: ZEP-1246
Change-Id: Id76d8fedb5ecaf0001c8429cf22f9a3e2c910a44
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fix Coverity, sizeof not portable, defect; by explicitly
using sizeof(void *).
suspicious_sizeof:
Passing argument mem_head of type void ** and argument 4U
/* sizeof (mem_head) */ to function memcpy is suspicious.
In this case, sizeof (void **) is equal to sizeof
(void *), but this is not a portable assumption.
Change-id: I4b4776466e16020876500feba0141985b8581017
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
External interrupts are indexed from value 16, wherein
0 to 15 are ARM cortex M exceptions. Fixed code in
_irq_is_priority_equal to fetch correct external
interrupt line ISR priority.
Change-id: I9cfd411480e78dfc9635e72d14df9d667a9d8400
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Coverity analysis discovered NULL pointer being
dereferenced when passing a auto variable. The variable is
now correctly assigned with address of a valid default
value variable. As per design, the dereferencing will not
happen as the master role does not use the passed parameter
only slave role uses it to prepare the connection parameter
request PDU.
Change-id: I3f8519b23a83cb8c50c7fba81810eff7737ff74a
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Coverity analysis discovered that observer filter policy
field was 1 bit, whereas valid range for extended scanner
filter policy feature implemented in controller is 0 to 3.
Increase the bit field size from 1 to 2.
Change-Id: Id4b2e354961dfb3b45f72fa4e0ab18de7425bbb5
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
This fix using incorrect address type for passive scanning with
privacy enabled. Controller was not reporting directed advertising
to RPA address due to public type being used for passive scan.
This was affecting TC_CONN_GCEP_BV_01_C, TC_CONN_ACEP_BV_01_C and
TC_CONN_DCEP_BV_01_C qualification test cases.
Jira: ZEP-1200
Change-Id: Icc316441fcac1a72d75f9ade27a99030efc846b9
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This might create confusions when debugging as usually the prefix is
associated with the file or layer.
Change-Id: Ibf45578c1f54a4bec896acd6042589c815216e1f
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
BR/EDR code should have minimal impact on LE code so to keep it simple
just require peripheral and central to be enabled when selecting BR/EDR
support.
Fix following Kconfig warning:
warning: (NETWORKING_WITH_BT && BLUETOOTH_BREDR) selects
BLUETOOTH_L2CAP_DYNAMIC_CHANNEL which has unmet direct dependencies
(BLUETOOTH && BLUETOOTH_HCI && BLUETOOTH_HCI_HOST && BLUETOOTH_CONN
&& BLUETOOTH_SMP)
Change-Id: I7f7cb8794def0df6daaa4abfe4596df460f1a2b2
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Fix following warning:
CC subsys/bluetooth/host/monitor.o
In file included from zephyr/include/drivers/loapic.h:58:0,
from zephyr/include/drivers/ioapic.h:22,
from zephyr/include/drivers/sysapic.h:20,
from zephyr/include/arch/x86/irq_controller.h:33,
from zephyr/include/arch/x86/arch.h:28,
from zephyr/include/arch/cpu.h:23,
from zephyr/include/kernel.h:2458,
from zephyr/include/zephyr.h:20,
from zephyr/subsys/bluetooth/host/monitor.c:24:
zephyr/subsys/bluetooth/host/monitor.c: In function
'_deprecation_check_sys_init_bt_monitor_init0':
zephyr/include/device.h:130:16: warning: '_INIT_LEVEL_PRIMARY' is
deprecated [-Wdeprecated-declarations]
static struct device_config _CONCAT(__config_, dev_name) __used \
^
zephyr/include/device.h:245:2: note: in expansion of macro
'DEVICE_AND_API_INIT'
DEVICE_AND_API_INIT(dev_name, drv_name, init_fn, data, cfg_info, \
^
zephyr/include/init.h:69:2: note: in expansion of macro 'DEVICE_INIT'
DEVICE_INIT(_SYS_NAME(init_fn), "", init_fn, NULL, NULL, level, prio)
^
zephyr/subsys/bluetooth/host/monitor.c:193:1: note: in expansion of
macro 'SYS_INIT'
SYS_INIT(bt_monitor_init, PRIMARY, MONITOR_INIT_PRIORITY);
^
zephyr/include/device.h:48:31: note: declared here
static __deprecated const int _INIT_LEVEL_PRIMARY = 1;
Change-Id: Ie903e3a075f6614b26018be5769be3651f0963be
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Added implementation for HCI Reset Command. Implementation
gracefully disables any running advertiser, observer, and/
or connection roles, and it resets controller context members.
The HCI Reset Command is implemented in such a way that
driver instances shared with other sub-systems and
application is not disturbed and instance/references used
by Bluetooth Controller are gracefully returned back.
Jira: ZEP-1282
Change-id: Ifb9ae6807736b5ec2d9f346cf2a590322056bcee
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This fixes issue that L2CAP Connection Parameters Update Request was
not sent. There was check that used LE features of host controller
to determine if L2CAP procedure or LL shall be used. It was failing
with 4.2 controller. The check shall test if remote supports
LL Connection Parameters Request Procedure. If it's not supported,
then L2CAP Connection Parameters Update Procedure will be used.
Closes ZEP-1220
1/4 L2CAP TC_LE_CPU_BV_01_C PASS
2/4 GAP TC_CONN_CPUP_BV_01_C PASS
3/4 GAP TC_CONN_CPUP_BV_02_C PASS
4/4 GAP TC_CONN_CPUP_BV_03_C PASS
Change-Id: I61ad544d9568ca6306a845e05c1a2e28d1693ab4
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Using the K_* macros makes it easier to read what exactly the various
timeouts are.
Change-Id: Ia405d3760b8e600af7e33a7221ef6ec717708973
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Switch left-over usage of TICKS_NONE and TICKS_UNLIMITED to the new
unified kernel counterparts K_NO_WAIT and K_FOREVER.
Change-Id: I2f2a16360e816f9f8791eb216deb3c70b8cc87df
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
During the initial integration of controller to Zephyr OS,
radio hardware access was abstracted out into hal/radio.c
file. Bug introduced in hal/radio.c has been fixed so that
whitelist feature works again.
Change-id: Ie5faf80b1a008ef326613548a5a28a4ba52e7ef7
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
The conditional defaults must come last in order to be properly
processed.
Change-Id: Id7a152ca1a1584935029e212d0dd8f37494d1cf4
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add implementation in HCI and Controller to support
HCI_LE_Remove_Device_From_White_List, as it is listed as
mandatory under BT Spec. v4.2, Part E, Section 3.19 LE
Controller Requirements.
Change-id: Icef88dffc85746f3cc7adb7fb692ae5578274ed2
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Rename left-over mentions in code comments of "fiber" to "thread".
Change-Id: I1af1baf99652434e90eb491c10238b94d26d341d
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Switch from fiber_start() to k_thread_spawn() and from NANOKERNEL to
POST_KERNEL init level.
Change-Id: I34fb11cbe20216c8646ebacb07be304a67e3cd0a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use k_thread_spawn() instead of the deprecated fiber_start() API.
Change-Id: I42e798ef3a4276863659c8d97c85224a652be1fd
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The bt_recv() function had protections for being called from a
preemptible task context, however nothing was protecting preemption by
ISR. A fairly simple fix is to protect the couple of critical regions
that can be reached from bt_recv() with the help of irq_lock().
Change-Id: Ifc29fd31205eb5425e1b7c862347d9420688df4e
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Switch to using the unified kernel k_thread_spawn() API instead of
nano_fiber_start().
Change-Id: I325cf467ae2a52c6aec8fc166397c323929e3013
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use the unified kernel API k_yield() instead of fiber_yield().
Change-Id: I8f52031f52f7ac8783033a51751dc22decdfa59a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Switch to using k_uptime_get() instead of the deprecated
sys_tick_get_32() API.
Change-Id: I737ef0153eff9d283bae840ff5177f8132396e1b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use defines from k_fifo intead of legacy API.
Change-Id: Ib8cf0d88240ef145da550b8cf83d2580e7140521
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Those are lefovers from nano_delayed_work usage.
Change-Id: I3f17c7b89b1fa946495e160732457500e2f74f25
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This fixes warnings related to the use of nano_work and
nano_delayed_work in HCI layer.
Note that k_delayed_work takes a timeout in miliseconds rather than in
ticks thus the timeout values have been changed.
Change-Id: I953a82a6aa613bb1072a8ad4b01e0f94e5cd64bd
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes warnings related to the use of nano_work and
nano_delayed_work in bt_conn layer.
Note that k_delayed_work takes a timeout in miliseconds rather than in
ticks thus the timeout values have been changed.
Change-Id: Ia8f34b475051515fd74000cce745ad226aa18aa5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes warnings related to the use of nano_work and
nano_delayed_work in SMP layer.
Note that k_delayed_work takes a timeout in miliseconds rather than in
ticks thus the timeout values have been changed.
Change-Id: Ida58ff0f609dc2a8fd415692bc2cec91eb56a294
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes warnings related to the use of nano_work and
nano_delayed_work in ATT layer.
Note that k_delayed_work takes a timeout in miliseconds rather than in
ticks thus the timeouts values changes.
Change-Id: I14d8438c1537febcb7768ef2934042ce38682739
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes warnings related to the use of nano_work and
nano_delayed_work in L2CAP layer.
Note that k_delayed_work takes a timeout in miliseconds rather than in
ticks thus the timeouts values changes.
Change-Id: I1e3bd7857248865e34a313dd42862af5f4e3805b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Currently the ideal buffer counts for a controller-only build are 6 RX
buffers and 7 TX buffers: ATT_MTU of 158 bytes can be sent in one
connection interval of 6 tx/rx -es wherein connection interval is
7.5ms
Change-Id: I64b4620c5e8e7db8d7ed72fa1db82e266e121f27
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch introduces the Connect API which initiates session
connection first. If session is already there with the peer
then it has to reuse it and initiate DLC (which will be done
in the subsequent patch) since there can be only one session
per device.
< ACL Data TX: Handle 256 flags 0x00 dlen 8
Channel: 64 len 4 [PSM 3 mode 0] {chan 0}
RFCOMM: Set Async Balance Mode (SABM) (0x2f)
Address: 0x03 cr 1 dlci 0x00
Control: 0x3f poll/final 1
Length: 0
FCS: 0x1c
> ACL Data RX: Handle 256 flags 0x02 dlen 8
Channel: 64 len 4 [PSM 3 mode 0] {chan 0}
RFCOMM: Unnumbered Ack (UA) (0x63)
Address: 0x03 cr 1 dlci 0x00
Control: 0x73 poll/final 1
Length: 0
FCS: 0xd7
Change-Id: I9828e0f3b3ea43bb17df95f0536e15df86f1b4be
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
In some SMP + GATT scenarios it's possible we get up to 6 incoming ACL
packets. To handle these efficiently, and more importantly, to not
have to drop data if the controller lacks host flow control (as is the
case currently with Zephyr-based controllers), increase the default
from 5 to 6.
For a controller-build it makes sense to just match up with the
controller-side configured RX buffers.
Change-Id: Id44fa724597b88a51f9085dac009e8d84a439bfc
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
All boolean options default to 'n' without the need to explicitly
state this. It's only the cases where we want 'default y' where we
need to state this.
Change-Id: I47dbda62462ea437a2423b8508ea2cc640a22e41
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Restructure the Bluetooth options more logically.
- Both host and controller are now behind the same high level
CONFIG_BLUETOOTH.
- Selecting controller support disables other HCI driver selection, so
the controller isn't in the same list as HCI drivers any more.
- Under the top-level there's a "Custom stack" option, which when
enabled opens up the option of choosing CONFIG_NBLE.
There are various other cleanups and simplifications in this patch as
well, since splitting these up would have been fairly tricky while
making sure all test cases still build.
Change-Id: I5bb715cb9d20201cb8b72fbd149c8a09a4b2d7d2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This should be particularly useful with the recently added controller
assert functionality that causes vendor events with debug information.
Change-Id: Ied0df2ff414e08c11a73cca0afba4dc04b0b8625
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When building Zephyr in the controller-only configuration,
assertions that happen in the Link Layer code are not visible
to the Host which is running on another HCI and connected via
UART or USB to it. This patch allows the Controller code
to output the assertion line number when in such a configuration,
allowing the Host to view the event to help debugging.
The event format used is temporary and will be replaced by a
standardized Vendor Specific specification to come at a later
time.
Change-Id: I013ca6783a3fdedc47b171132919dd4798c66285
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The right convention for help text is tab + 2 spaces.
Change-Id: I2722a8b33f5f74be110dc43fbcecc12841f0db84
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When retrying the request due to a security error that can fail but since
the original buffer was freed in the process the code can no longer verify
if the opcode matches thus it always fails BT_ATT_ERR_UNLIKELY instead of
using the response error, so this not longer cares about the opcode and
just use the response error always.
JIRA: ZEP-1195
Change-Id: I1149b993b97733ab5bb00f347e4f973647e0fdd4
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This consolidate code around LE signalling header handling which has been
duplicated in many places.
Change-Id: I0c2cd48c155b751e1bbbd26070965d075cdc2cc5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When a peer controller does not recognize one of the LL control
PDUs received, it will issue an LL_UNKNOWN_RSP PDU to let the
peer know that it does not recognize the request.
The controller now handles this incoming PDU and completes the
procedure by issuing the appropriate HCI event in the case of
an LL_FEATURE_REQ and _RSP pair.
Jira: ZEP-1220
Change-Id: I7c04a346441f04deee41198daa6309c11ae1b571
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
'private' is a C++ reserved word and will lead to compilation errors:
C++ ble.o
In file included from ble.cpp:7:0:
include/bluetooth/bluetooth.h:284:10: error: expected unqualified-id before 'private'
uint8_t private[4];
Change-Id: I36aef5a84af4fc66e1c810bd0c56e5ab5f803294
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In function at_get_number check for the value if gets computed.
If not return error. Also change the end state handling.
Change-Id: I193b04fa2880dfb44e7727b30b67c1ec2e051cc7
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
Add an implementation for the bt_storage_clear() API.
Jira: ZEP-181
Change-Id: Iae01c571c161317ea0cc44513d108301c7b5a069
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add basic implementation of an internal storage handler that uses the
local file system. The root directory for all Bluetooth related data
is /bt. Each remote device has its own subdirectory and each key its
own file. This helps keep the implementation very simple, but does
come with the meta-data overhead for each file.
As an example, the value of a key 0x0001 for a device with a static
random address cc:11:22:33:44:55 would be stored in the following
file: /bt/cc11223344551/0001. Local values such as the identity
address are stored directly under /bt with a file name that matches
the key the same way as remote-device files.
For full functionality the implementation requires a file system that
can support file/directory names of up to 13 characters in length. If
the file system supports less than that (as is the case with FAT12)
then only local values can be stored (in /bt/abcd). Local values
include the identity address as well as the local IRK.
Jira: ZEP-181
Change-Id: I7dc696af6353a154cb00dcd01a5f4ac3d7127e6b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is not needed for Zephyr controller build and should already
be fixed in Mynewt.
Change-Id: I39e81dc3e9b5fd5a3f5f823465527248625caf26
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Patch 8c118f8673 causes the wrong semaphore
to checked so receiving credits are never restored which caused the
channel to get stuck after all the credits are consumed.
JIRA: ZEP-1199
Change-Id: I9cd5474b3bcaafcb19d15613939ce30d07befe0a
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Remove hardcoded use of crystal as 32KHz clock source and
20 ppm accuracy; and use the values from config for sleep
clock source and sleep clock accuracy value in Bluetooth
Controller.
Change-id: I1c0d53ecf8ad158153d5186a6680b5eb03d1641b
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Making a reference to the common work queue code should not necessarily
drag in the system workqueue, since it is possible to use a workqueue
that is not the system workqueue. This is done by moving the system
workqueue into its own code module.
Moving the system workqueue to its own code module allows removing the
NANO_WORKQUEUE and SYSTEM_WORKQUEUE kconfig options, and compiling the
common workqueue code and system workqueue all the time. They are only
linked in the final image if a reference to them exist, same as the
other kernel modules.
Change-Id: I6f48d2542bda24f4702e7c2e317818dd082b3c11
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Provide more detailed information about the controller address and
version upon init when debug is enabled.
Change-Id: I5fe9c7c91f95928cb3cc64b801137bb1466e4115
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
During implementation of alternate encryption procedure
usable in nRF51, commited in
c41d3edda8, re-encryption
procedure was broken. This commit fixes the issue, and
now re-encryption should work on both nRF51 and nRF52.
Change-id: Ia41200f42b1d46e1f3f35ff44b582d4ffcc5f4fa
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
So that application could check data pointer to see if any
data have been received and if read operation is complete.
Change-Id: I36c3ff81baefbc535374d937e5297938445eafa6
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This makes use of the same code used by LE to print the state transitions.
Change-Id: I90a04f3c3f426fde1e0987acb572f7371c483c1c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a common function to log state transitions including the caller
function and line in case something goes wrong:
[bt] [DBG] bt_l2cap_chan_disconnect: (0x0011b14c) chan 0x001199c0 scid 0x0040 dcid 0x0040
[bt] [DBG] bt_l2cap_chan_set_state_debug: (0x0011b14c) chan 0x001199c0 psm 0x0080 connect -> disconnect
[bt] [WRN] bt_l2cap_chan_set_state_debug: bt_l2cap_chan_disconnect()1562: invalid transition
Change-Id: I246a9004a04d93a38b8c7f7633705f6c191698b2
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Channel state shall be updated properly otherwise it may cause unexpected
errors.
Change-Id: Ifd54d6bd3c5b44a40c315fd8a2946b30168aa65f
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This defines and clarifies PF bit macro for both UIH and
non UIH packets.
Change-Id: Ide7736c0fc8607708824766adbfccf1bd7bc48e9
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Security will be elevated based on the DLC required level
during connection.
Change-Id: I0b63885582f34a5689f7bc8081c1f9f011b2325f
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Initialize the variable to zero before computing.
Change-Id: Iccdf77a085667728dbb68779f001c8d940a7a89d
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
This is necessary in order to properly handle security errors which are
part of the testing specification thus can influence qualification.
Change-Id: If444e753be9196f3d5bb36cea00e332a33aa249f
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This is to avoid code duplication while implementing outgoing
connection.
Change-Id: I52f882b7be9180f29def59c8ac3ef0a4798b719d
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
This is to avoid code duplication while implementing outgoing
connection.
This also moves setting initiator flag while allocating, than
doing it when SABM is received.
Change-Id: I8e811c995bf0eaa0bd24715e2e96d8a578a79c5d
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
This replaces initiator flag of session and dlc to enum which has
two values INITIATOR and ACCEPTOR.
Also this defines macros for CRs in header. Basically there are
three types fo CRs. Frame header CR has different meaning for
UIH and non UIH packets. Also this renames the existing msg hdr
CR to make it consistent.
These changes are basically done to make it more readable
Change-Id: Ic15e93465b0afbd19d8805f27d7a43f34ef38689
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Move controller code from drivers/controller to
subsys/bluetooth/controller.
Change-Id: I73f675188485aa3267507bad7647796e593a3da0
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Move the Bluetooth host stack from net/bluetooth to
subsys/bluetooth/host. This is preparation for having both host and
controller under the same root, i.e. subsys/bluetooth/.
Change-Id: I3bc796f7e331fca0c485f3890d62b9c03e027b96
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
