In case sufficient security level wasn't reached the error propagation
was missing, which could lead to incorrect state transitions when
update_sec_level_br() returns. Return true/false and make sure to
abort any further operations in case the update fails.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The storage for the public key is pub_key in hci_core.c.
When the public key event is generated the public key is copied into
this buffer, but the pointer to the event storage of the key is given
in the public key ready callback (bt_smp_pkey_ready).
SMP expects that it is safe to assign a global pointer to this variable.
In smp_init bt_pub_key_get is used to get the pointer to the public key.
In both cases SMP assigns the le_sc_pub_key to the pointer given.
This creates an issue when bt_smp_pkey_ready callback occurs after
smp_init during pairing procedure, SMP will then have a pointer to an
event buffer that has been released and contains invalid data.
Fixes: #18580
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Give the security changed callback when the peripheral initiated
security request and peer attempted to encrypt the connection but no LTK
match was found.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Make sure that a new pairing procedure with an existing bond does not
result in a security with weaker security properties.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add option to force the host to initiate pairing procedure even if the
host has encryption keys for the peer.
This option can be used to pair with a bonded peer that has deleted its
bonding information without deleting the keys. If new pairing results
in weaker keys the pairing will be aborted.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add security error to security_changed callback. Call this callback when
security has failed and provide current security level and error.
Reason for failure can be.
- Pairing procedure failed, pairing aborted before link encryption.
- Link encrypt procedure failed
- Link key refresh procedure failed.
Fix missing bt_conn_unref on encryption key refresh with error status.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Stop the pairing procedure in the request phase if no storage is
available for the keys. This avoids the pairing procedure from failing
during the key distribution phase.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Proved the Authentication callback for pairing failed and pairing
complete when BR/EDR SSP is complete.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Allow SMP debug keys to behave in the same way as normal keys, in order
to debug with encryption and Bluetooth sniffer the exact way it behaves
when not using debug keys.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This removes the necessity of registering the storage for CCC and make
it part of the declaration itself.
Fixes#18547
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds support to provide an UUID to bt_gatt_indicate so API user
don't need to hardcode the attribute offset by hand.
Fixes#18572
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes the dead code when parsing Find Information response since
the index counter can never be zero, instead it checks there are any
attributes found and if there nothing don't proceed with discovering
which was the original intent of the now dead code.
Fixes#18384
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When the database changes and a client becomes change unware it should
also clear the out of sync flag as the following request should return
an error:
Core Spec 5.1 | Vol 3, Part G, 2.5.2.1 Robust Caching:
'The error response is sent only once after the client becomes
change-unaware, unless the client disconnects or the database changes
again before the client becomes change-aware in which case the error
response shall be sent again.'
Fixes: #18183
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes the following crash:
ASSERTION FAIL [0] @ ZEPHYR_BASE/subsys/logging/log_core.c:180
argument 2 in log message "%s: Stored CCCs for %s (%s)"
missing log_strdup().
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fix issue unable to connect to bonded peer when host resolution is used
either because the controller does not support privacy, or the
controller resolving list was exceeded.
In this case we need to use the RPA from the advertising report
directly, there is a small chance of the peer cycling the RPA here, in
which case the connection might be unsuccessful.
Bug introduced here: 45da629b24Fixes: #18306
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The RPA timer should always be running, even with privacy supported by
the controller. In order to select an IRK to generate the private
the controller is instructed by provided an identity address.
If we want to advertise privately without providing an identity address
the host has to set the private address.
Fixes: #18150
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix missing interval min copy in bt_conn_set_param_le. Application is
unable to override BT_GAP_INIT_CONN_INT_MIN for interval_min.
Fixes: #17789
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This is safer now that bt_conn_create_pdu can return NULL when using
syswq which can prevent things like signalling of L2CAP and ATT layers.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Since TX complete notification are dispatched with syswq blocking on it
can completely deadlock Bluetooth so this attempt to make it safe by
return -ENOMEM if that the current thread happens to be the syswq
thread.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add whitelist support in the bluetooth host.
Supported features:
- Advertising with whitelist on scan requests, connect request ,or both
- Scanning with whitelist
- Creating connections using a whitelist (Auto connection procedure).
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Allow Security level HIGH and FIPS to be initiated when we have received
OOB data for the remote device. The security property of MITM is allowed
if out of band authentication data is available.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Use the src and dst naming to refer to the identity addresses of the
connection. Keep the device addresses used during connections but rename
them to local and remote instead.
Update documentation to be more descriptive.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
subsys/bluetooth/host/Kconfig.gatt is already sourced within an
'if BT_CONN' in subsys/bluetooth/host/Kconfig.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
If no callback for oob data request is registered, or the user decided
to abort authentication during OOB data request, we should return the
error code for no OOB data available to indicate that the user does not
have the correct OOB, or no OOB interface at all.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix kernel crash if bluetooth authentication handlers has not been
registered. The bt_auth object is then NULL, this dereference caused a
call to an invalid function pointer.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fixed error 'The int symbol BT_DISCARDABLE_BUF_COUNT is being evaluated
in a logical context somewhere'.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
subsys/bluetooth/host/Kconfig.l2cap is already sourced within an
'if BT_CONN' in subsys/bluetooth/host/Kconfig, so BT_DEBUG_L2CAP does
not need a 'depends on BT_CONN'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Find by type does only accept a UUID with the same length as the UUID
which is stored in the internal list. If a UUID is stored in the short
16 bit format then a request with 128 bit UUID will fail.
Add support for the missing formats.
Signed-off-by: Kim Sekkelund <ksek@oticon.com>
Fix an issue in the SMP identity distribution where the IRK for the
default identity was always distributed.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix bug introduced by: 45da629b24
Mistakenly set the own address type to the destination address type.
Also this uses the RPA_OR_RANDOM in case local IRKs exists in the
controller.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The init addr should contain the on-air address used to establish the
connection. The dst address contains either the current RPA of the
unknown peer, or the identity address after identity information has
been exchanged.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Error codes are listed in header files and in the core spec as hex
values. Always print them in hex in debug for easier error code
checking.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix an issue where the generated identity was not permanently stored.
This resulted in being unable to reconnect after bonding when using
privacy, since a new local IRK was generated on reboot.
When settings is enabled the application is responsible for loading
identities and possible creating its own identities.
When settings_load is called and no identities has been created or found
in persistent storage a new identity will be created.
Since bt init has not been finalized bt_id_create will not make a call
to bt_settings_save_id. So we need to make sure that this identity will
be stored.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Logging module requires strings to be duplicated using log_strdup.
Enabling CONFIG_BT_DEBUG_KEYS caused runtime assertions in the logging
module.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Core 5.1, Vol 3, Part F, 3.3.1
"Multi-octet fields within the GATT profile shall be sent least
significant octet first (little-endian) with the exception of the
Characteristic Value field. The Characteristic Value and any fields
within it shall be little-endian unless otherwise defined in the
specification which defines the characteristic."
Fixes: GATT/SR/GAS/BV-02-C
Fixes: #17857
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The call to bt_conn_security will send a SMP security request for
peripheral, and for central it will initiate LL encryption.
A call to bt_conn_security with no IO capabilities but authenticated
keys has been distributed, would succeed on central side, but fail on
peripheral side with error code -22.
The keys could have been either:
- Preprogrammed
- IO capabilities may have changed.
- OOB bonding may been used.
Fix so that Peripheral can send a security request if the bond
information is already established.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The original creates a pointer to a compiler-generated temporary that is
destroyed when the scope is exited. The pointer is stored in a structure
defined in an enclosing scope and is invalid by the point it's used.
The fix holds the structure in a variable with the same lifetime as
the pointer.
Signed-off-by: Findlay Feng <i@fengch.me>
This introduces a new flag (BT_GATT_SUBSCRIBE_WRITE_PENDING) which is
set when a write operation requires canceling before the parameters can
be reused.
Fixes#17534
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a dummy cancel request which is used instead of NULL when
clearing and outstanding request thus prevent new request to take
place before a response is received while allowing the original request
to be reused.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Set advertisers state flags so that previous advertise params does not
affect the current advertiser state.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Rename the controller Kconfig option BT_LL_SW to
BT_LL_SW_LEGACY in preparation towards switch to new Link
Layer implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Bluetooth address parsing has been duplicated across the different
sub-shell files. Also missing parsing of identity/resolved addresses.
Move parsing of string close to parsing to string for a symmetrical API
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Submit GATT database hash as a delayed work to prevent it being run
twice if we register dynamic services.
Signed-off-by: François Delawarde <fnde@oticon.com>
Having this option disabled, MITM flag state can be controlled by
bt_conn_security state. This option is enabled by default to not
change the current implementation behavior.
Related to SM/MAS/SCPK/BV-01-C.
Fixes#17463
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Handle optional argument UUID in bt_gatt_discover with type
DISCOVER_DESCRIPTOR, bt_uuid_cmp doesn't check for NULL pointer.
On system with MMU (nrf52_bsim) this can result in segfault.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
We've already got GATT services in subsys/bluetooth/services so
subsys/bluetooth/mesh is a more natural place. Aditionally this aims
to fix the Kconfig dependencies to be able to use mesh together with
BT_CUSTOM (i.e. a custom, potentially non-HCI, host stack).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Two sections are needed: bt_l2cap_fixed_chan and bt_l2cap_br_fixed_chan.
However the second one cannot be created using #define as the
preprocessor will expand it to the first before compilation happens,
sending bt_l2cap_br_fixed_chan instances in the wrong section.
This fixes commit 4e8ddfd640 ("Bluetooth: L2CAP: Make use of
Z_STRUCT_SECTION_ITERABLE").
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Fix an issue in the gatt_register routine where removing a service and
adding it again would cause the database to have non-ascending
orderdered handles numbers and lead to an incomplete service discovery.
Fix: Go through the database and look for a place where to insert
the new service.
Signed-off-by: Arthur Crepin-Leblond <arthur.crepin@proglove.de>
Introduce a separate buffer pool for events which the HCI driver
considers discardable. Examples of such events could be e.g.
Advertising Reports. The benefit of having such a pool means that the
if there is a heavy inflow of such events it will not cause the
allocation for other critical events to block and may even eliminate
deadlocks in some cases.
Also update all mesh samples not to specify explicit RX buffer counts
anymore. Instead, create appropriate defaults in Kconfig so that we
only need to override this in the app for cases like the bbc:microbit
with limited memory.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This event is a priority one, so it's not safe to have it use the RX
buffer pool which may be depleted due to non-priority events (e.g.
advertising events). Since the event is consumed synchronously it's
safe to have a single-buffer pool for it. Also introduce a new
bt_buf_get_evt() API for HCI drivers to simplify the driver-side code,
this effectively also deprecates bt_buf_get_cmd_complete() which now
has no in-tree HCI driver users anymore.
Fixes#16864
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
move misc/stack.h to debug/stack.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/util.h to sys/util.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/slist.h to sys/slist.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/byteorder.h to sys/byteorder.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/__assert.h to sys/__assert.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move uart.h to drivers/uart.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move atomic.h to sys/atomic.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Log all send errors, but don't try to call e.g. prov_send_fail_msg()
since that'll almost certainly fail as well.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Mesh Profile Spec v1.0.1 | Section 5.4.2.3:
"The Provisioner and the device shall check whether the public key
provided by the peer device or obtained OOB is valid (see Section
5.4.3.1).
When the Provisioner receives an invalid public key, then provisioning
fails, and the Provisioner shall act as described in Section 5.4.4.
When the device receives an invalid public key, then provisioning
fails, and the device shall act as described in Section 5.4.4."
This is also in Erratum 10395 which is Mandatory for Mesh v1.0.
The code was already rejecting the key, however that rejection
happened only after we had already sent our public key as response,
which got interpreted as acceptance by the tester (PTS).
Fixes MESH/NODE/PROV/BI-13-C.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Mesh Profile Spec v1.0.1 Section 5.4.2.3: "If the public key was not
available using an OOB technology, then the public keys are exchanged
between the Provisioner and the unprovisioned device. For each
exchange, a new key pair shall be generated by the Provisioner and the
unprovisioned device."
This allows passing MESH/NODE/PROV/BV-12-C.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Clear the callback list once generation is complete and we've done
calling all callbacks. This lets us use bt_pub_key_gen() multiple
times, which before this patch could have resulted in a corrupt linked
list.
Also remove redundant callback dispatching from bt_pub_key_gen() since
the function checks for the PUB_KEY_BUSY flag in the beginning, i.e.
there cannot be other pending generation actions at this point in the
code.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Update code to handle other users of the public key generation APIs
by fetching the current public key at the beginning of each SMP
session. This is particularly important if someone creates the (rather
odd) combination of Mesh and SMP where Mesh will regenerate a new
key pair after provisioning.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Mismatch in Public Key type will cause device to send Invalid Format
error, and treat any further PDU's as unexpected.
This affects MESH/NODE/PROV/BI-03-C test case.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Provisioning errors shouldn't cause device to close link. Upon error,
device will send Provisioning Failed PDU, and any further PDU's will
be considered as unexpected as per Mesh Profile section 5.4.4.
Also a timer is started every time device sends or receives a PDU.
This affects MESH/NODE/PROV/BV-10-C test case.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Updated the bluetooth module to use static handlers. Removed the
old bt specific static registration.
The routine bt_settings_init() is still calling settings_init() which
IMO is not needed anymore.
Updates:
changed SETTINGS_REGISTER_STATIC() to SETTINGS_STATIC_HANDLER_DEFINE()
changed settings_handler_stat type to settings_handler_static type
removed NULL declarations
renamed bt_handler to bt_settingshandler, as bt_handler already exists.
renamed all bt_XXX_handler to bt_xxx_settingshandler to avoid any
overlap.
changed SETTINGS_STATIC_HANDLER_DEFINE() to create variable names from
_hname by just prepending them with settings_handler_.
updated all bt_xxx_settings_handler to just bt_xxx.
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
The string returned by bt_uuid_str() is not in ROM so log_strdup()
must be used on it. This also eliminates the following kind of warning
messages: "<err> log: argument 3 in log message "%s: start_handle
0x%04x end_handle 0x%04x type %s" missing log_strdup()."
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Although the Characteristic Value descriptor is required to be
immediately after the characteristic descriptor, the specification
allows for gaps in the corresponding Attribute handles. Use the value
handle from the characteristic descriptor for value reads.
See BLUETOOTH CORE SPECIFICATION Version 5.1 Vol 3, Part G section 2.5.1
(p. 2345), first paragraph.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Update the Replay Protection List handling for segmented messages to
be more in line with Figure 3.43 in Mesh Profile Specification 1.0.
This means that the RPL check and update need to be split into two
independent steps rather than always doing these together.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Fix iterating past the response which causes an invalid memory to be
accessed and passed over to the callback as if there were more
attributes found.
Fixes#16602
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When advertising with different identities we need to flag any
programmed RPA as invalid if it was generated using a different
identity.
Fixes#16893
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This array was created because more than 4 bytes were needed, however
now the minimum is 8 bytes, so we can use the net_buf user data
directly.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This updates all client modules to const char processing of
setting names.
Update of peripheral_dis sample
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
This makes it safe to allocate buffer from the TX callback by freeing
the context before calling the callback which should wake up the TX
thread had it be pending on add_pending_tx.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This API had several issues:
- The parameter types and order were inconsistent with e.g.
bt_le_adv_start()
- There were no real users of num_params, which just caused increased
code size and memory consumption for no good reason.
- The error handling policy was arbitrary: if one of the
notifications would fail it would be impossible for the caller to
know if some notifications succeeded, i.e. at what point the
failure happened. Some callers might also want to make note of the
failure but continue trying to notify for the remaining parameters.
The first issue is easily fixable, but because of the other two I
think it's best we don't have this code as part of the stack, rather
require whoever needs it to do the for loop themselves. It's just a
few lines of code, so the benefit of having this in the stack was
anyway quite minimal.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
k_sem_give shall only be used if no callback has been set otherwise
k_sem_take was not called which can break the flow control.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
For the request:
DCID shall map to rx.cid:
'This field specifies the endpoint of the channel to be disconnected
on the device receiving this request.'
SCID shall map to tx.cid:
'This field specifies the endpoint of the channel to be disconnected
on the device sending this request.'
For the response when receiving the roles are inverted.
Fixes#16799
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Number of matches was not being properly handled causing the callback to
be called more than specified by the caller.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Since the bt_mesh_msg_ctx struct no longer has a size that is a
multiple of 2, the bitfields might as well be made to normal types
as this will minimize the code generated to access them.
Signed-off-by: Tobias Svehagen <tobias.svehagen@gmail.com>
By moving the rssi value from the bt_mesh_net_rx struct to the
bt_mesh_msg_ctx struct, it will be available to applications via
the mesh op callbacks.
Signed-off-by: Tobias Svehagen <tobias.svehagen@gmail.com>
The attribute handle used to read next attribute has to be incremented
to not loop reading the same attribute.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
When trying to establish friendship the Friend must respond to the
initial Friend Poll with a Friend Update. If this initial Friend Update
response is not received the Friendship establishment process must start
again.
When starting a second Friendship establishment processes the `sent_req`
field of the `lpn` struct was left set to `TRANS_CTL_OP_FRIEND_POLL`.
This prevented the initial Friend Poll being sent out on the second
attempt. Since the Friend Poll was not sent, no timeout is set and
nothing happens ever again. No more Friendship Requests are sent.
This commit clears `sent_req` back to zero when no Friend Update
response has been received after the initial Friend Poll.
Fixes#16678
Signed-off-by: Rich Barlow <rich@bennellick.com>
Although unlikely it is possible that a remote may attempt to send just
1 byte as the write request allows to do that:
BLUETOOTH CORE SPECIFICATION Version 5.1 | Vol 3, Part F
page 2320:
'If the attribute value has a fixed length and the Attribute Value
parameter length is less than or equal to the length of the attribute
value, the octets of the attribute value parameter length shall be
written; all other octets in this attribute value shall be
unchanged.'
Fixes#16734
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This convenience macro wraps Z_DECL_ALIGN() and __in_section() to
simplify static definitions of structure instances gathered in dedicated
sections. Most of the time those go together, and the section name is
already closely related to the struct type, so abstracting things behind
a simpler interface reduces probability of mistakes and makes the code
clearer. A few input section names have been adjusted accordingly.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The alignment fix on struct device definitions should be done to all
such linker list tricks. Let's abstract the declaration plus alignment
with a macro and apply it to all concerned cases.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Per guidelines, all statements should have braces around them. We do not
have a CI check for this, so a few went in unnoticed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When reading attributes from static services their handles will not be
set and must be resolved at runtime.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fix gatt indicate when conn is NULL and called with characteristic
declaration as the attribute argument. In this case the handle was not
advanced to the characteristic value. This is inconsistent with the rest
of the notify and indicate API
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Mesh Profile 1.0 Section 6.6:
"The timeout for the SAR transfer is 20 seconds. When the timeout
expires, the Proxy Server shall disconnect."
This will let qualification test case MESH/SR/PROX/BV-05-C pass
without requiring an explicit disconnect.
Fixes#16600
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This moves the processing packets of upper layers from RX thread to the
system workqueue so they have the same priority as the TX callbacks
which has the added benefit of making any protocol on top of L2CAP to
be executed using system wq stack.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Disable flow control with POSIX_ARCH since these boards tend to run
faster than normal defering the TX callback to system wq may not be
able to run before another packet is received.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes the transmission complete callbacks to run on system wq
context so they are not executed in TX thread which usually has a much
smaller, and non-configurable, stack size.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This reworks bt_gatt_notify_cb to allow passing an UUID, in addition to
that it can now accept multiple notification at once as there could be
multiple instance of the same UUID the user can set multiple set of
parameters.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This make use of bt_gatt_foreach_attr_type to match the CCC UUID which
previously was not possible with bt_gatt_foreach_attr.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds bt_gatt_foreach_attr_type which can match attribute by UUID
and/or attribute user_data, in addition of that the user can also limit
the number of matches.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Implement HCI driver for STM32WB. It allows host to controller.
It is based on ST library allowing communication over RAM shared
bewteen chip's C-M4 and C-M0 cores.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
When removing a service using bt_gatt_service_unregister, its attributes
handles will keep their value which can cause a problem when adding the
service again to the GATT database.
When re-adding, the gatt_register routine is taking the last handle of
the GATT database to compare it with the handles of the service to be
added.
If a service has handles with a lower value than the last handle of
the database an error will occur.
If we add/remove/add the last service, no error will occur as its
handles are always greater than the last one of the database.
Instead of resetting the handles when unregistering a service and
reassign new ones we make sure that the handles of the services are
not in use in the GATT database in order to place the service back
where it used to be.
Signed-off-by: Arthur Crepin-Leblond <arthur.crepin@proglove.de>
This adds a new callback for L2CAP channels which notities whenever
status has changed so the channel user can can for example resume or
suspend sending depending on the status.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The Bluetooth menu has way too many option so this move the L2CAP
specific option to its own menu.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a new callback to bt_l2cap_chan_ops which is called whenever a
SDU is completely sent.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This allows setting a custom pointer to be passed back to the complete
callback at expense of increasing the buffers in 4 bytes.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This changes the declaration of fixed channels to be statically defined
with use of BT_L2CAP_CHANNEL_DEFINE since fixed channels are never
unregistered.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Added support for the LE SC pairing with the OOB data. The peripheral
side is only supported for now.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Add an event handler for HCI vendor-specific events with the
event code BT_HCI_EVT_VENDOR.
A vendor defined callback can be registered to be called when
vendor-Specific events are received in the stack. The callback can then
decode and handle the event; if not the stack will decode and handle
the event.
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
When using the procedure Read By Type the response may contain multiple
instances so it needs to be parsed properly. When dealing with long
values only the beggining will be read, for the remaining bytes the
application should issue another bt_gatt_read with offset so Read Blob
procedure is used as recommended by the spec:
BLUETOOTH CORE SPECIFICATION Version 5.1 | Vol 3, Part F page 2312:
The Read Blob Request would be used to read the remaining octets of a
long attribute value.
Fixes#16107
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If the local node keeps getting bombarded with messages, it's possible
that the storage timer gets rescheduled over and over again and never
expires. Add the necessary code to only reschedule the timer if the
new deadline is earlier than an existing one.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The default values for the timeouts, as well as non-defaults in most
Mesh samples, use a higher value for the RPL than then generic mesh
storage timeout. This hasn't had any effect in practice since the code
only uses the RPL timeout if it is *smaller* than the generic one.
The original intention of the code was to use the RPL timeout,
regardless of what the generic one is, whenever the RPL is the only
thing that needs updating. Add some helper macros to track the various
groups of pending flags, and perform the appropriate checks to apply
the RPL timeout whenever it's smaller than the generic timeout, or if
there are no other items to store besides the RPL.
Fixes#15904
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Fix calling bt_gatt_foreach_attr with start handle parameter set
to last static attribute handle.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
settings_read_cb is defined to return ssize_t and not size_t. This
also eliminates several Coverity warnings.
Fixes#15765Fixes#15768Fixes#15771Fixes#15774Fixes#15778
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This reintroduces support for static service in the form of a new API,
BT_GATT_SERVICE_DEFINE, and changes the internal services (GAP/GATT)
to be defined as const as they are never register/unregistered.
Internal service needed to be renamed in order to keep the same order
as before since the section elements are sorted by name.
The result is the following (make ram_report):
before:
gatt.c 572 0.66%
cf_cfg 32 0.04%
db 8 0.01%
db_hash 16 0.02%
db_hash_work 32 0.04%
gap_attrs 180 0.21%
gap_svc 12 0.01%
gatt_attrs 160 0.18%
gatt_sc 80 0.09%
gatt_svc 12 0.01%
sc_ccc_cfg 32 0.04%
subscriptions 8 0.01%
after:
gatt.c 210 0.24%
cf_cfg 32 0.04%
db 8 0.01%
db_hash 16 0.02%
db_hash_work 32 0.04%
gatt_sc 80 0.09%
last_static_handle 2 0.00%
sc_ccc_cfg 32 0.04%
subscriptions 8 0.01%
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Major changes are:
- Expose settings backend API to enable custom backend support.
- Add a new CONFIG_SETTINGS_CUSTOM backend to allow registering a custom
backend.
- Change api of the handlers h_set() routines to allow for
backend-specific read callbacks.
- Provide a customizable settings_backend_init() routine for custom
backends.
- Move runtime settings support to be its own backend.
Signed-off-by: François Delawarde <fnde@oticon.com>
Aligned format specifiers for the Bluetooth Host. Now, the format
specifier matches the variable type.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
This patch adds support for Read Using Characteristic UUID which is one
of the procedure to read the characteristic value especially when the
client only knows the characteristic UUID and does not know the handle
of the characteristic.
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
General MIC fix for AAD lengths up to 14 bytes.
This case doesn't concern the mesh stack because it uses 16 bytes.
Signed-off-by: Reham Tarek <reham.tarek@si-vision.com>
This stores the database hash and check if it has changed on commit
skipping service changed if hash matches.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Custom handlers without any arguments don't since there is a check for
argc > 1, to fix this behavior removing the check.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If handle is over the range end return since handles are always placed
in ascending order.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This reduces bt_gatt_foreach_attr complexity (O(n)) so it can skip
ahead when the start handle is not within its service handles.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It may be very important information for the developer if scanning
fails to start or stop, so add proper logs. There's no need to log
EALREADY errors, since the mesh stack doesn't track the current scan
state and simply relies on the under lying GAP layer to return this
error if the desired state is already set.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
bt_gatt_connected should be only called, when there is no
connection error. Change fixes problem with receiving notifications
before connection.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
The commit 8d0ef1eb85 attempted to fix
test case MESH/SR/HM/CFS/BV-02-C, however inadvertently ended up
introducing a hidden bug. This bug was unearthed thanks to commit
686f5c79cf. We have to keep always track
of the FastPeriodDivisor state whether we're using it (faults > 0) or
not (faults == 0). Introduce a boolean field to the model publication
that's used to indicate whether the FastPeriodDivisor should be
applied or not, instead of zeroing the divisor when there are no
faults (this would cause wrong behavior when faults appear again).
Additionally, the PTS seems to require that we wait until the end of
the existing period before sending the next Health Current Status,
rather than sending it immediately when the fault count changes.
Fixes#15365
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Implement the Controller counterpart to CONFIG_BT_WAIT_NOP so that it
issues a NOP Command Complete event after booting up, to signal to the
Host that it is ready to receive HCI traffic.
Fixes#15333
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
When a device is considered unpaired any configuration set in Client
Features shall also be removed.
Fixes#15329
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When calling bt_unpair() the keys were removed from flash, however a
pointer was left to the invalidated keys in case there was an existing
connection. This would then lead to a bogus entry being stored in
flash for a zero-address peer device. Fix this issue by clearing the
conn->le.keys pointer in the bt_unpair() function.
Fixes#15325
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The bt_mesh_fault_update() API is meant for updating the publication
message and sending it out to the network, however it was missing the
necessary call to health_pub_update() which is responsible for
updating the publication message.
Fixes#15300
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Persistent storage is done. So are the configuration and health
clients. We're also not actively looking to optimize the provisioning
protocol & mesh networking memory usage anymore.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Rename reserved function names in the subsys/ subdirectory except
for static _mod_pub_set and _mod_unbind functions in bluetooth mesh
cfg_srv.c which clash with the similarly named global functions.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Rename reserved function names in drivers/ subdirectory. Update
function macros concatenatenating function names with '##'. As
there is a conflict between the existing gpio_sch_manage_callback()
and _gpio_sch_manage_callback() names, leave the latter unmodified.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
The spec allows to set to no specific value with use of 0xffff.
As this still enables entering values in the invalid range, 3200-65535
for min/max interval, this adds the necessary build checks to prevent
values within this range to be used and at same time check if min
interval is not bigger that max interval.
Fixes#15017
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In order to advertise directed to a privacy enabled central the
initiator field of the directed adv packet needs to set to an RPA.
To instruct the controller to use an RPA in the initiator field own
address type should be set to either 0x02 or 0x03.
Since it is not certain that a remote device supports address resolution
of the initiator address we add an option to turn this on and give the
application the responsibility to check if peer supports this.
Fixes#14743
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
In order to accept string of the same size entered in
CONFIG_BT_DEVICE_NAME_MAX an extra byte must be allocated to guarantee
it will always be NULL terminated.
Fixes#15067
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There's no need to track this info in prov.c since hci_core.c is
already doing it. Just query hci_core.c always using the
bt_pub_key_get() API.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If PB-GATT is disabled while there are connected clients, those
clients must be disconnected. Add a 'disconnect` parameter to
bt_mesh_proxy_prov_disable() to handle scenarios when we don't want to
disconnect (e.g. right after successfully finishing provisioning) and
tose where we do want to disconnect (e.g. user requesting to disable
the provisioning bearer).
Also make sure that we always update advertising, so that a stale
advertising set isn't left in the controller.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If both PB-ADV and PB-GATT are supported, we need to properly
re-initialize variables such as link.rx.prev_id and (particularly
importantly) link.rx.buf. If we don't do this it may lead to the
following fault when trying to reprovision again:
***** USAGE FAULT *****
Illegal use of the EPSR
***** Hardware exception *****
Current thread ID = 0x20001f10
Faulting instruction address = 0x0
Fatal fault in thread 0x20001f10! Aborting.
Fixes#14928
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Remove unnecessary const keywords (the entire struct is const) and use
bool instead of u8_t for the require_link member.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Using settings_delete() makes it much easier to understand what the
code is doing, and actually also reduces the amount of code.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add error checking, remove redundant code, and improve the logging for
settings related functionality.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The read() callback of attributes returns ssize_t and not size_t. Fix
this, which also fixes a Coverity warning.
Fixes Coverity CID 197457
Fixes#14958
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The convention in the code is to use the appropriate address copying
functions instead of direct assignments. Even when a specific copying
function doesn't exist the convention is to use memcpy.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Updating the Resolvable Private Address when advertising and
active scanning in progress fails and clears the RPA_VALID
flag; making the next bt_le_scan_start while continuing to
advertise to fail.
This is fixed by keeping the RPA_VALID flag remain set.
Stopping and starting active scanning to update RPA can be
implemented in a separate commit.
Fixes#9463.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
With BT_HOST_CRYPTO, advertising stack size could be overflowed,
increase size to 1024 when BT_HOST_CRYPTO is enabled.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Several public APIs were not checking the BT_DEV_READY flag, which
could lead to hard-to-debug behavior, particularly when the stack
lacks an identity address. Add the appropriate checks to these APIs.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The treatment of the BT_DEV_READY flag was broken when used together
with BT_SETTINGS. The flag would get set even though the stack was
still in a partially initialized state. Even worse, for central role
the stack would potentially try to initiate passive scanning without
having an identity address.
Refactor the code that sets the BT_DEV_READY flag (among other
initialization) into a separate bt_finalize_init() helper function and
call it when the settings have been loaded. Also clarify the warning
message given to the user in case settings_load() needs to be called.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The code for clearing model bindings and subscriptions was flawed in
that proper "cleared" entries were never stored in settings. The code
must pass 0 and NULL to settings_save_one() in case the entry is
desired to be cleared.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The code was storing a "cleared" entry in storage for every model,
regardless of them having any subscriptions or not. Update hte
mod_sub_list_clear() function to return a "cleared entries" count so
that the calling code can decide whether any action is needed or not.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Remove redundant "val (null)" logs and add a few missing BT_DBG()
calls to make the tracing of storage handling easier.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The le_conn_param_req() function was missing a return statement in
case of a failed connection lookup. This could lead to replying to the
connection parameter request twice as well as passing NULL to
bt_conn_unref(). The latter issue also triggered a Coverity warning.
Fixes CID 196638
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There's a BT_DBG that will output the value of pub_addr before its ever
set to anything. Remove output of pub_addr from BT_DBG().
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This adds BT_GATT_DISCOVER_ATTRIBUTE which can be used to discover any
type of attribute in a given range.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Those are not considered Descriptors and shall be discovered with
use of BT_GATT_DISCOVER_CHARACTERISTIC.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When discovering descriptor Find Information procedure is used which
does not allow any filtering by the server so it will return all
attributes in the given range including services and characteristics.
Fixes#14265
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
By specifying the controller directly when selecting the default
BT_HCI_TX_STACK_SIZE, an external controller may rely on the final
default value when none of the in-tree controllers are used.
The value is increased to 1024 to accomodate the current worst-case
stack size.
Signed-off-by: Thomas Stenersen <thomas.stenersen@nordicsemi.no>
Update reserved function names starting with one underscore, replacing
them as follows:
'_k_' with 'z_'
'_K_' with 'Z_'
'_handler_' with 'z_handl_'
'_Cstart' with 'z_cstart'
'_Swap' with 'z_swap'
This renaming is done on both global and those static function names
in kernel/include and include/. Other static function names in kernel/
are renamed by removing the leading underscore. Other function names
not starting with any prefix listed above are renamed starting with
a 'z_' or 'Z_' prefix.
Function names starting with two or three leading underscores are not
automatcally renamed since these names will collide with the variants
with two or three leading underscores.
Various generator scripts have also been updated as well as perf,
linker and usb files. These are
drivers/serial/uart_handlers.c
include/linker/kobject-text.ld
kernel/include/syscall_handler.h
scripts/gen_kobject_list.py
scripts/gen_syscall_header.py
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
subsys/bluetooth/common/Kconfig and subsys/bluetooth/host/Kconfig are
'source'd within 'if BT' and 'if BT_HCI', in subsys/bluetooth/Kconfig,
so there's no need to add those dependencies within them.
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. Dependencies on menus work similarly. There are no
"conditional includes" in Kconfig, so 'if FOO' has no special meaning
around a source. Conditional includes wouldn't be possible, because an
if condition could include (directly or indirectly) forward references
to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
CCC cfg value was not being cleared on disconnection of a non bonded
peer if another peer was connected, had non zero value and occurred
earlier in the ccc cfg array.
Signed-off-by: Nick Ward <nick.ward@setec.com.au>
This makes use of BT_GATT_CCC_MANAGED so instead of having a custom
attribute which is not managed by stack.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This consolidates code for finding a CCC config in a helper function
thus reducing the amount of duplicated code.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds another helper macro called BT_GATT_CCC_MANAGED which can be
used to set 2 new callbacks:
- cfg_write: Which application can set if it wants to manage writes to
CCC configuration.
- cfg_match: Which application can set if it wants to manage matching
CCC configuration when notifying/indicating.
BT_GATT_CCC_MANAGED retains the ability of saving peer configuration
on storage making it useful for clients which are only interrested in
managing the CCC configuration but not the storage itself.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Some more were added since the cleanup pass in June 2018. See e.g.
commit 2d50da70a1 ("drivers: ipm: Kconfig: Remove redundant 'default n'
properties") for a motivation. It also avoids people wondering whether
or not they need to put in 'default n'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Prevent temporary strings from being printed incorrectly if they go out
of scope before being processed by logger.
Signed-off-by: Filip Kubicz <filip.kubicz@nordicsemi.no>
The bt_settings_encode_key() cannot know if the given path pointer is
on the stack or not, so the only safe way to pass it to the logger is
by using a log_strdup() call. Not doing this will likely cause
corrupted strings to show up in the log output.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
It is planned to deprecate SHELL_CREATE_STATIC_SUBCMD_SET macro
which is replaced by SHELL_STATIC_SUBCMD_SET_CREATE.
Additionally, removed irrelevant comments about alphabetical
ordering which is no longer needed.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Changed the order of Bluetooth callbacks. Now the connected callback is
received before CCC changed callbacks.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
In certain configurations, such as with MPU support enabled, the
consumption of the advertising thread has gone slightly up. In some
case it was seen to overflow by some 48 bytes. Let it always be 786,
like it was so far with CONFIG_BT_HOST_CRYPTO.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There are issues using lowercase min and max macros when compiling a C++
application with a third-party toolchain such as GNU ARM Embedded when
using some STL headers i.e. <chrono>.
This is because there are actual C++ functions called min and max
defined in some of the STL headers and these macros interfere with them.
By changing the macros to UPPERCASE, which is consistent with almost all
other pre-processor macros this naming conflict is avoided.
All files that use these macros have been updated.
Signed-off-by: Carlos Stuart <carlosstuart1970@gmail.com>
This adds BT_GATT_ENFORCE_CHANGE_UNAWARE option which when enable
returns -EAGAIN when notifying or indicating if the client is
change-unware to conform with following statement on the spec:
'BLUETOOTH CORE SPECIFICATION Version 5.1 | Vol 3, Part G page 2350:
Except for the Handle Value indication, the server shall not send
notifications and indications to such a client until it becomes
change-aware.'
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
BLUETOOTH CORE SPECIFICATION Version 5.1 | Vol 3, Part G page 2405:
'For clients with a trusted relationship, the characteristic value
shall be persistent across connections. For clients without a
trusted relationship the characteristic value shall be set to the
default value at each connection.'
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This implement Robust Caching which is mandatory when Database Hash and
Service changed Characteristics are supported.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This implements the Database Hash characteristic which generates a hash
with the contents of certain attributes. The generation of hash is
usually offloaded to the systemwq using a delayed work so that when
application register multiple services only one hash needs to be
calculated.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The Client Supported Features characteristic is used by the client to
inform the server which features are supported by the client.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds BT_GATT_CACHING option which can be used to enable support
for Client Supported Features and Database Hash characteristics.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When optimizations are disabled more RAM is used and we get a stack
overflow on BT_HCI_TX_STACK_SIZE. To rectify this, increase the stack
size when CONFIG_NO_OPTIMIZATIONS.
This does not scale well, and will have to be replaced by a a more
general solution eventually, but in the mean time it follows the
existing best practice established by the GCOV infrastructure in
commit e908ea9aa5
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Translate HCI error codes to POSIX error codes in order to be able to
distinguish reason of connectable advertising start failure.
Signed-off-by: Filip Kubicz <filip.kubicz@nordicsemi.no>
The Bluetooth 5.1 specification was recently released, and has a new
version identifier (10) assigned to it in the Bluetooth Assigned
Numbers.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Convert the remaining places of the host stack where
net_buf_pull_mem() makes more sense than net_buf_pull().
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Take advantage of the new net_buf_pull_mem() API, and refactor the
events from long switch statements into (const) handler tables. This
helps reduce code size and makes it cheap to add proper checks/asserts
for having sufficient data in the buffers coming from the controller.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Sending a model publication message could fail e.g. if there are no
buffers available, however this doesn't mean that we should stop doing
periodic publishing indefinitely. When an error occurs, make sure to
call the publish_sent() function so that the periodic publishing timer
gets resubmitted if necessary.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In some cases the Friendship & Low Power Node features aren't
available or feasible, however power saving is nevertheless required.
This patch introduces two new APIs to suspend and resume the Mesh
network. Currently, what this impacts is the LE scanning, the
ability to allocate new outgoing buffers, as well as the model
publishing, beacon and heartbeat timers.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Tracking of the BT_MESH_VALID flag and the PB-GATT state was rather
fragile. Add proper error returns to the various GATT service enable &
disable handlers, and toggle the BT_MESH_VALID flag in a single file
(main.c). Use the newly added error returns to ensure that we don't
re-enable PB-GATT if it wasn't already enabled from before.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There's already a flags member in the bt_mesh context, so take
advantage of that for any boolean members that have so far been
bit-fields. This should produce more efficient code, also for the
sequence number that's now its own u32_t.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Build fails in smp.c:3942 if BT_SMP_SELFTEST is enabled,
sign_test uses smp_sign_buf which only available for BT_SIGNING.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
This adds bt_gatt_write_response_cb works similarly to
bt_gatt_notify_cb which can take a callback to be called when the PDU
is considered transmitted over the air.
Note: This can also be used to disable the ATT flow control which would
blocks sending multiple commands without wainting their transmissions.
Fixes#11558
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The current stack consumption with the H4 driver on qemu_x86 is as
follows with a change from 256 to 512:
usage 396 / 512 (77 %)
Increase the default for this configuration, as well as other similar
configurations. Set the fallback default to a higher value as well.
Fixes#12429
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The msg->prev_addr is already stored in frnd->clear.frnd, so there's
no need to have an extra stack variable for this (in the form of
prev_addr).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Currently, when handling a Friend Request message with `prev_addr` set,
we look up existing friend entry using `prev_addr` as the address.
However, `prev_addr` is the address of the requesting node's previous
friend, NOT the address of the requesting node itself. Therefore, we
should always look up existing friend entry using `rx->ctx.addr` as the
address.
Signed-off-by: Jiahao Li <reg@ljh.me>
This fixes usage of an uninitialized variable (to_store) as introduced
by commit bfad2a0.
Fixes#12314
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When using bt_gatt_discover with BT_GATT_DISCOVER_CHARACTERISTIC the
read callback would be set to bt_gatt_attr_read_chrc which would attempt
to access the next attribute which in this case would not be set since
the value attribute is no fetched by the discovery, the spec actually
omit the value handle saying it should always be the first attribute to
appear after the characteristic thus we can assume it to be handle + 1.
Fixes#12159
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Both "store" and "clear" are verbs, so putting them after each other
is just confusing. Use "clean" consistently when clearing settings
entries.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The code need to be align after introduction of stream codec to
setting serialization subsystem.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The Code need to be align after introduction of stream codec to
setting serialization subsystem.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
1. Created new shell module: shell_help.
2. Simplified command handlers with new shell print macros.
3. Removed help functions from command handlers.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Removing help "options" from shell API.
Currently SHELL_OPT macro is not used by users. What is more
commit: a89690d10f ignores possible options created in
command handler by the user. As a result they are not printed
in help message.
Second, currntly implemented "options" in command handlers options are
implemented without SHELL_OPT macro.
And last but not least this change will allow to implement
help handler in a way that user will not need to think about calling
functions printing help in a command handler.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
When we're acting as a Friend for an LPN, we need to consider all
elements of the LPN. The information of how many elements the LPN has
is provided in the Friend Request message, however until now the code
did not do anything with this information.
Fix the issue by tracking the number of elements for each LPN and
update the unicast address matching code to take this into account.
Fixes#11731
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There is not an easy way to relate an application's user_data to a
connection. One way is to save a pointer to bt_conn in the
application's user_data array upon connection establishment.
Each connection related callback function will have to loop for all
user_data and compare the saved pointer to the passed bt_conn
pointer. This is inefficient if there are many callback activations
during the connection.
This change makes the internal bt_conn mapping function accessible to
applications in conn.h. The function name is changed to
bt_conn_index() to clearly indicate that the function returns an
index of an array.
Add an ASSERT to catch illegal parameter.
Signed-off-by: Kim Sekkelund <ksek@oticon.com>
When removing a peer from a CCC, it also needs to be removed from
the attribute `cfg`.
Not removing it would create a shortage of `cfg` that could
prevent new host to pair to the BLE device.
Signed-off-by: Olivier Martin <olivier.martin@proglove.de>
CCC settings was not removed when unpairing all keys.
It means CCC settings were still present in flash and were
loading at bluetooth initialization time.
Loading these orphan CCC settings would fill `bt_gatt_ccc_cfg`
configurations and would prevent to add new CCC when pairing
with a new device.
Signed-off-by: Olivier Martin <olivier.martin@proglove.de>
Accourding to Bluetooth specification the Service Changed
Characteristic shall not have its handle changed once it has been
bonded, so this moves the GATT service to be the very first service
registered that way it is guaranteed that it won't change even if
device is flashed with a different configuration which end up changing
the handles after it.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It is related to b904ad387f.
This fixes checking ECDH related events in event mask.
If ECDH support is disabled in host, there is no need to check
if those are supported in the controller.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Some backends may actually contain the same key multiple times so the
code needs to check if there is already a ccc_cfg for an address before
attempting to use one that is unallocated.
Fixes#11409
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If there are no CCC to be stored the value should be set to NULL so it
is properly cleared otherwise calling settings_str_from_bytes will leave
str uninitialized which may cause a crash when attempting to load the
value.
Fixes#11564
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds Kconfig option to disable HCI ECDH support.
It will compile out ECDH related code, especially HCI event handlers.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This adds common option to disable support for LE Data Length Update
procedure in controller and host.
This will reduce flash usage by compiling out le_data_len_change
event handler that will never be called if controller has been
compiled with BT_CTLR_DATA_LENGTH option disabled.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This adds common option to disable support for PHY Update
procedure in controller and host.
This will reduce flash usage by compiling out le_phy_update_complete
event handler that will never be called if controller has been
compiled with BT_CTLR_PHY option disabled.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Logging subsystem could take few extra bytes when enabled.
ECC thread stack has been unconditionally increased to
support it.
During my test, I noticed a usage of 1052 bytes when logging
subsystem is enabled.
Signed-off-by: Olivier Martin <olivier.martin@proglove.de>
This makes it clear that only request need to set an opcode since they
require a error response in case it fails.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The comment was suggesting that write callback was reading and storing
buffer when in fact it should write to the attribute value.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Application may need to handle the write differently depending on the
write operation so this adds a flag called BT_GATT_WRITE_FLAG_CMD which
can then be checked by the callback, for instance one can respond with
BT_ATT_ERR_WRITE_REQ_REJECTED when that flag is not set which should
indicate to the client to use write command instead.
Fixes#11206
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Consider invalid if the request pointer is NULL or the callback is NULL
or there is a request ongoing. This conditions would likely lead to a
crash and most likely there is some other bug involved like for example
the application queueing the same request multiple times.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When issuing LE Set Data Length Command host should not assume that
LE Data Length Change Event will be generated. From Core Spec 5.0:
"If the command causes the maximum transmission packet size or maximum
packet transmission time to change, an LE Data Length Change Event
shall be generated."
Change-Id: I17723b58ed4f390aa465db3f69126ee229871123
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
If master or application decided to switch connection parameters to
ones that meet pending parameters don't bother sending request
after 5 seconds timeout.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Experiments have shown that the probability of missing advertising
packets is significantly lower with 30ms scan window compared to 10ms
scan window. This is especially the case with advertisers using a 20ms
advertising interval, which in turn is perhaps the most common one
since it's the smallest allowed by the Bluetooth 5.0 specification.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
By default, CCC value is only stored to persistent memory during
BT disconnection. This commit adds an optional storing of CCC right
after it has been updated. This results in better robustness of
peripheral but increases system workqueue stack usage.
Signed-off-by: Filip Kubicz <filip.kubicz@nordicsemi.no>
Couple of findings which were revealed after changing
LOG_MODULE_REGISTER macro:
- missing semicolons after LOG_MODULE_REGISTER()
- missing LOG_LEVEL defines
- other
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The endif comment block is for CONFIG_BT_FIXED_PASSKEY not
CONFIG_SMP_FIXED_PASSKEY. Fix the comment to match.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This makes mesh shell to register commands with the new shell subsystem
and stop using the legacy shell.
Fixes#11056
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
With multiple devices on auto-connect list it is possible that while
having pending connection to device A, device B disconnects. In that
case host should not try to start scan (currently controller doesn't
support concurrent scanning and initiating).
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Fallback to L2CAP Connection Parameters Update Request if LL Connection
Update Request was rejected by remote device that has this marked as
supported in features. This can happen if procedure is supported only
by remote controller, but not enabled by host. This is connection
parameters update with iOS devices.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
This will exclude GATT Client response handlers from compilation
if GATT Client support is disabled.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
k_poll_signal was being used by both, struct and function. Besides
this being extremely error prone it is also a MISRA-C violation.
Changing the function to contain a verb, since it performs an action
and the struct will be a noun. This pattern must be formalized and
followed and across the project.
MISRA-C rules 5.7 and 5.9
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Fix misspellings in Kconfig files that show up in the configuration
documentation (and make menuconfig screens).
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
In Bluetooth 5 the definition of LE security mode 1, has changed.
LE Security Mode 1 level 4 requires authenticated LE Secure Connections
pairing with encryption using a 128-bit strength encryption key.
This also changes the behaviour when a security request and response
would end up with a security level that is lower than the one requested.
Before pairing would complete, and the link would disconnect with error
authentication failure. Instead a SMP will abort pairing with error code
authentication requirement, or encryption key size.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This adds new API fuction to update running advertising data.
It will remove the need of advertising restarting.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Connection complete event with error code can be received only for
central role and can be compiled conditionally.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
This adds support for returning various return codes from
the channel accept callback.
This is needed for implementation of incoming connection
authorization for certification purposes.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Rename connection response results to map those that are defined
for BR.
BR: BT_L2CAP_BR_*
LE: BT_L2CAP_LE_*
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Convert the monitor protocol to a proper logger backend. This also
means that our log.h headerfile gets greatly simplified.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Now that log processing happens in a separate thread, the
BT_STACK_EXTRA macro is not needed (since there's no significant
overhead), and therefore the BT_STACK macros become unnecessary as
well.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Mkae sure that variable pointed by params is valid when passing it
as function argument.
Fixes#10587
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Improve the error feedback when calling bt_le_adv_start and inputting
too much data in the advertisement.
Error feedback before:
Bluetooth initialized
Advertising failed to start (err -22)
Error feedback after:
Bluetooth initialized
[bt] [ERR] set_ad: Advertising data does not fit in buffer
Advertising failed to start (err -22)
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Add option to disable legacy pairing and only use secure connection.
If legacy pairing was requested pairing will be denied with status
insufficient authenticated
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This commit adds missed const modifier for addr pointer for
bt_le_set_auto_conn function
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
bt_conn_disconnect removes device from autoconnect list and thus
should not be called from le_conn_update when timeouting pending
connection. Also auto connect flag needs to be check on connection
failure to make sure scan is restarted.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Auto connect code reuses bt_conn object and connection code was assuming
object was cleared which resulted in invalid code being provided to
application. Fix that by explicitly setting error code to 0 on
successful connection.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Depending on perhiperal advertising interval 3 seconds might not be
enough and would result in cancelling pending connection. Make this
Kconfig configurable and let application to decide.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Under GNU C, sizeof(void) = 1. This commit merely makes it explicit u8.
Pointer arithmetics over void types is:
* A GNU C extension
* Not supported by Clang
* Illegal across all ISO C standards
See also: https://gcc.gnu.org/onlinedocs/gcc/Pointer-Arith.html
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Applications may require different scan windows and interval depending
on expected re-connection time or peer devices advertising parameters.
Default to GAP recommended slow values.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
The address of the device is also set via HCI interface when passive
scanning is used. As a result, LL does not filter out directed
advertising packets that are targeted at this device.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
This allows to configure desired parameters for peripheral. When set
PPCP characteristic is also added to GAP service. If disabled it is
up to application to controll connection parameters and stack will
only enforce 5 seconds delay before update.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
This fixes a few issues with the handling of Connection Parameter
update in the Host:
- starting conn param update timer as master
- ignoring 5 seconds slave timer when calling bt_conn_le_param_update
- starting conn param update timer on every PHY update
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
So far the stack hasn't provided any way for the application to access
the existing bonds. This patch adds such an API.
Fixes#10122
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This uses net_buf_append_bytes to reassemble the SDU segments instead of
doing it manually.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If the remote stack is not able to fully utilize each segment it is
possible it would run out of credits before completing the SDU, these
changes detects if that would happen and attempt to restore enough
credits for the SDU to be received.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This simplify the logic of restoring the credits after each SDU instead
of using an arbitrary threshold which was not configurable per channel.
Because the credits are restored only when the full SDU has been
reassembled it means the channels needs to be set up with enough for
the configured MTU otherwise there is a risk of the channel to run out
of RX credits before the packet is fully reassembled, because of such
corner case the code will now warn if a channel is setup with not enough
init_credits.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a int return to recv callback which can be used to notify the
stack about errors when receiving a packet. In addition to that the user
can return -EINPROGRESS to inform the stack the data will be processed
asynchronously which can be complete by calling
bt_l2cap_chan_recv_complete.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When activating SystemView internal kernel header files will be
included. This causes a name conflict with smp_init in smp.c
and smp_init in kernel_internal.h
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This fix ensures that the handle range used for next GATT discovery is
always inclusive. Previously, the discovery procedure could not be
started with equal value of start and end handle.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
The current method relies heavily on the linker/compiler to
do the correct operation. Which is to eliminate the code that will
never get called. This posses a problem if the build even changes
by a smallest fraction.
The current patch will enforce proper inclusion of the code at the
pre-processing stage. Thereby not relying on the compiler/linker to
do the right thing.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
New shell implementation is on the way. For now old one and all
references are kept to be gradually replaced by new shell.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add functionality for setting the host channel classification in
the controller using the HCI command.
This closes issue #9851
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
When running combined build on nRF5 with disabled VS command it is
possible to simply read static random address from FICR in host.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
This adds a function that will disable Bonding flag in
Authentication Requirements flag in SMP Pairing Request/Response.
This is needed for qualification purposes.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This will exclude testing Mesh related code from build if BT_MESH
option in Kconfig is not set.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This makes bt_gatt_discover perform discover all proceduce if no UUID
is given in the parameters.
Fixes#9713
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Long write procedure currently requires BT_GATT_PERM_PREPARE_WRITE to
be set otherwise the prepares would fail. This changes the behavior so
that BT_GATT_PERM_PREPARE_WRITE enables checking each prepare chunk
skipping it otherwise.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
None of the data for the CEP, CUD and CPF descriptors needs to be
modified by the stack at runtime. Make it possible to pass constant
data to the descriptor macros, and make sure the descriptor handlers
cast the data back to be a constant.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The req variable in smp_pairing_failed() does get used, so
ARG_UNUSED() is inappropriate for it.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Just like we set the address for an identity without depending on the
BT_DEV_READY flag, we should do the same for the IRK. Otherwise we
risk getting an all-zeroes IRK. Remove the condition and always set
the IRK value whenever CONFIG_BT_PRIVACY is enabled.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The code creating identities from the Read_Static_Addresses vendor
command was failing to create matching IRKs, resulting in an
all-zeroes IRK to be used. Fix this by using the existing id_create()
function which takes care of generaing an IRK when necessary.
Fixes#10003
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
A subsequent patch will make bt_setup_id_addr() depend on id_create()
which was so far lower down in the hci_core.c c-file. Move
bt_setup_id_addr() further down to avoid a forward declaration.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There are some cases where atomic_and/or don't need to be
checked. Actively acknowledge these cases.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The return of memset is never checked. This patch explicitly ignore
the return to avoid MISRA-C violations.
The only directory excluded directory was ext/* since it contains
only imported code.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This changed added notification complete callback which
gives information if a given notification has been sent.
Signed-off-by: Kamil Gawor <Kamil.Gawor@nordicsemi.no>
Added implementation to the directed advertising API in the Connection
Management module. Introduced a new connection state for this type of
advertising. The new state is symmetric to the connection state used for
scanning.
Added a new advertising option that can be used to trigger low and high
duty directed advertising. Added macros for default values of
Advertising Parameters, which are used to trigger directed advertising.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
This adds Central Address Resolution characteristic that is required
to check by peer if it's about to send directed advertisements where
initiator address is set to RPA.
Zephyr supports the Address Resolution, so the characteristic value
is hard-coded.
Please check Core 5.0 Vol 3 Part C 12.4 CENTRAL ADDRESS RESOLUTION
Related PTS test case: GAP/CONN/ACEP/BV-03-C
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This ensures the core services are always registered first and the
gatt_sc work is initialized.
Fixes#9785
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The test for IS_ENABLED(BT_SETTINGS) in mod_reset()
should be IS_ENABLED(CONFIG_BT_SETTINGS).
Signed-off-by: David Leach <david.leach@nxp.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The ordering of items in flash is not guaranteed, so it's possible we
get an App Key before the corresponding Net Key. Remove the check for
a Net Key, since the storing code should never store an App Key if
there is no corresponding Net Key.
Fixes#9670
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The code in le_set_private_addr() was hardcoding identity 0, even
though it is given a specific identity as an input parameter.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If cfg_changed has not been set consider that the application don't
care and just skip it.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
PTS version 7.3.0 incorporates some errata which change the expected
behavior of the heartbeat subscription state. Update the code so that
the following tests pass successfully:
MESH/NODE/CFG/HBS/BV-01
MESH/NODE/CFG/HBS/BV-02
MESH/NODE/CFG/HBS/BV-03
MESH/NODE/CFG/HBS/BV-04
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Some things, such as UUID, URI or even the local name may be different
when bt_mesh_prov_enable() is called compared to when bt_mesh_init()
was called. Create the advertising data on-demand each time when
enabling PB-GATT.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In some cases the application might only initialize its UUID after
calling bt_mesh_init(), e.g. in the case of deriving the UUID from the
identity address. To avoid confusing logs, only print the UUID when
actually enabling one of the provisioing bearers.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This API makes it possible to delete an existing identity and to flag
its storage slot as unused.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Make sure the application doesn't pass existing identity addresses to
bt_id_create() and bt_id_reset(). Also make sure we don't accidentally
create a duplicate when generating random identity addresses.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add a new API which can be used to reclaim an identity slot for a new
identity. When called, any previous pairings, connections, or other
data will be cleared, and then a new identity will be generated in the
place of the old one.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
None of the callers of these APIs do anything with the return value,
so just remove it to produce more efficient code.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This wasn't used anywhere and was typed incorrectly (the foreach
callback takes two parameters). There was also one user of this which
was triggering compiler warnings of mismatched callback type.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When doing bt_unpair() we need to pass the given identity when
disconnecting and clearing keys, in case all associated pairings were
requested to be cleared.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Update the storage handling to take into account multiple identities.
We can save a bit of code by using the new bt_id_create() API from
within settings.c.
Also make the treatment of addr & irk parameters to bt_id_create()
consistent, in that NULL is acceptable for both of them.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This flag was both redundant and creates confusion with potentially
multiple identity addresses (it was only referring to the first
identity address). We can simply just look at the type of the identity
address wanting to be used.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Make it possible to have multiple identity addresses as an LE
peripheral. For central role only the default identity is supported
for now. This also extends the flash storage in a backward compatible
way.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Up until now, Zephyr has patched Kconfig to use the last 'default' with
a satisfied condition, instead of the first one. I'm not sure why the
patch was added (it predates Kconfiglib), but I suspect it's related to
Kconfig.defconfig files.
There are at least three problems with the patch:
1. It's inconsistent with how Kconfig works in other projects, which
might confuse newcomers.
2. Due to oversights, earlier 'range' properties are still preferred,
as well as earlier 'default' properties on choices.
In addition to being inconsistent, this makes it impossible to
override 'range' properties and choice 'default' properties if the
base definition of the symbol/choice already has 'range'/'default'
properties.
I've seen errors caused by the inconsistency, and I suspect there
are more.
3. A fork of Kconfiglib that adds the patch needs to be maintained.
Get rid of the patch and go back to standard Kconfig behavior, as
follows:
1. Include the Kconfig.defconfig files first instead of last in
Kconfig.zephyr.
2. Include boards/Kconfig and arch/<arch>/Kconfig first instead of
last in arch/Kconfig.
3. Include arch/<arch>/soc/*/Kconfig first instead of last in
arch/<arch>/Kconfig.
4. Swap a few other 'source's to preserve behavior for some scattered
symbols with multiple definitions.
Swap 'source's in some no-op cases too, where it might match the
intent.
5. Reverse the defaults on symbol definitions that have more than one
default.
Skip defaults that are mutually exclusive, e.g. where each default
has an 'if <some board>' condition. They are already safe.
6. Remove the prefer-later-defaults patch from Kconfiglib.
Testing was done with a Python script that lists all Kconfig
symbols/choices with multiple defaults, along with a whitelist of fixed
symbols. The script also verifies that there are no "unreachable"
defaults hidden by defaults without conditions
As an additional test, zephyr/.config was generated before and after the
change for several samples and checked to be identical (after sorting).
This commit includes some default-related cleanups as well:
- Simplify some symbol definitions, e.g. where a default has 'if FOO'
when the symbol already has 'depends on FOO'.
- Remove some redundant 'default ""' for string symbols. This is the
implicit default.
Piggyback fixes for swapped ranges on BT_L2CAP_RX_MTU and
BT_L2CAP_TX_MTU (caused by confusing inconsistency).
Piggyback some fixes for style nits too, e.g. unindented help texts.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
