Disable userspace for benchmarks because it changes the KPI
numbers. It will be re-enabled once the required code is
in place.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Disable userspace for benchmarks because it changes the KPI
numbers. It will be re-enabled once the required code is
in place.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Disable userspace for benchmarks because it changes the KPI
numbers. It will be re-enabled once the required code is
in place.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Disable userspace for benchmarks because it changes the KPI
numbers. It will be re-enabled once the required code is
in place.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Disable userspace for benchmarks because it changes the KPI
numbers. It will be re-enabled once the required code is
in place.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
* because stack analysis is required, so STACK_CHECK must be
turned off. No HW_STACK_PROTECTION has no impact on current test
* If CONIFG_USERSPACE, the real stack size is bigger than the declared
stack size
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
In arc, privileged stack is merged into defined stack. So
the real stack size should add privileged stack size.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
This redirects PRINT() to printf() and not printk() and
was causing stack overflows on some platforms.
Fixes: #8033
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This symbol was renamed by commit 14e73e73c3 ("net: Make DEBUG config
option naming consistent"), but an assignment (and a commented-out
assignment) to the old name remained.
Fix the assignments to use the new name.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
These are no longer needed since commit 4dc9e5b2de ("kconfig: Get rid
of 'option env' bounce symbols"). The C tools are likely to get rid of
them soon too.
The APPLICATION_BASE symbol (option env="PROJECT_BASE") triggered a
compatibility warning, because 'option env' symbols now need to have the
same name as the environment variables they reference to be compatible
with Kconfiglib. APPLICATION_BASE is unused, so just remove it.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
These symbols were removed in commit ed26b95746 ("drivers/gpio:
Removing dts generated options in QMSI Kconfig").
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
DNS_RESOLVER_MAX_SERVERS has the range [1,NET_MAX_CONTEXTS], with
NET_MAX_CONTEXTS being set to 4, but is set to 5. Out-of-range .config
values are ignored, so the symbol reverts to its default value (1).
Increase NET_MAX_CONTEXTS to 5. DNS_SERVER{1-5} being set probably
implies that DNS_RESOLVER_MAX_SERVERS shouldn't be decreased to 4.
This fixes two Kconfig warnings (out-of-range + didn't get assigned
value).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The test was using ztest incorrectly exposing everything as one single
test function. We now have multiple tests that can be tracked back to
features and requirements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We were referring to old function names and still using the task
terminology which can be confusing.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Userspace doesn't necessarily imply stack overflow protection
for supervisor threads. Enable this as well if the hardware
supports it.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This test exaustively tests preemption points between threads of all
priority classes (cooperative, preemptible, and metairq), done both
from a synchronous reschedule (via k_sem_give() and from interrupt
context (via irq_offload()), and with and without the sched_lock()
held. It then detects the next thread that runs and validates vs. the
documented priority rules.
Note that there is a whitelisted case on ARM, where irq_offload()
seems not to be working like a true interrupt (it always returns to
the interrupted context and doesn't seem to hit the normal exception
return path which can context switch). And native_posix is excluded
because of failures and the fact that it's actually never possible to
truly preempt a thread there (they run to completion inside _Swap()
et. al. and then block themselves). Both of these should be fixable
in the future but don't (seem to) directly relate to this test.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
These symbols were renamed by commit bf964cdd4c ("net: Renaming net
nbuf API to net pkt API").
Update the assignments to use the new names.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
CONFIG_NET_TCP_{TIME_WAIT,2MSL_TIME} were replaced by
CONFIG_NET_TCP_TIME_WAIT_DELAY in commit 89f57c225a ("net:tcp: Define
single condig option for TIME_WAIT delay"), which also switched from
seconds to milliseconds for specifying the delay.
Remove the old assignments and set the new symbol to give the same
behavior as before.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
CONFIG_NET_RPL_MC_ETX was misspelled as "..._EXT".
CONFIG_NET_RPL_MC_{NONE,EXT,ENERGY} are choice symbols. Setting a choice
symbol to 'y' implies that none of the other choice symbols are
selected, so remove the 'n' assignments and keep just the
CONFIG_NET_RPL_MC_ENERGY=y assignment.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
CONFIG_IEEE802154_CC2520_AUTO_ACK started out as
CONFIG_TI_CC2520_AUTO_ACK, which was removed in commit 6b43821f20
("net: Remove legacy Contiki based uIP stack"). The assignments were
later renamed in commit 573774a9bf ("drivers/net/ieee802154: Change
configuration prefix").
Remove them.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The ADC_DEBUG Kconfig symbol was removed in commit a679f32920
("sys_log: replace old debug macros at ADC driver"), which introduced
SYS_LOG_ADC_LEVEL and switched to using SYS_LOG_DBG() for debug
messages.
Remove the ADC_DEBUG=y assignment and set SYS_LOG_ADC_LEVEL=4 so that
the debug messages still show up.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The generation of Stack Corruptions reports is, now, supported
in ARM SOCs with the ARM MPU (CONFIG_ARM_MPU). Therefore, this
commit removes the workaround for ARM architecture in
tests/kernel/fatal/ and keeps it only for SOCs with the NXP MPU
(CONFIG_MXU_MPU).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
No such generic UART symbols ever existed, afaict. Maybe some
board-specific UART was meant to be disabled.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
During the spi rework we removed the qmsi spi drivers so we no longer
have Kconfig symbols or drivers related to CONFIG_SPI_QMSI{_SS}. There
are a few references still around that we should remove
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
CONFIG_UART_NSIM depends on CONFIG_NSIM, which was removed in commit
9bc69a46fa ("boards: Update arc em_starterkit support from 2.2 to
2.3"). Remove the dependency, and also remove the CONFIG_NSIM=y setting
from the test_nsim test (which should now work).
Also change the condition for EXTERN()ing _VectorTable in
include/arch/arc/v2/linker.ld to check CONFIG_UART_NSIM instead of
CONFIG_NSIM. I'm guessing the EXTERN() is there to make the symbol
visible to nSIM, though I don't know anything about it.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
gdb_server was removed in commit 0f669132a0 ("kernel: remove
gdb_server"), but still has a testcase that sets CONFIG_GDB_SERVER=y,
and some code in arch/x86/debug.
Remove the leftover parts. This also gets gets rid of undefined
references to the CONFIG_GDB_SERVER symbol.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Zephyr code routinely assumes conventional ILP32/LP64 integer
behavior, and occasionally relies on it to perform some nice tricks.
This is despite the fact that this behavior (while pervasively adopted
and in use on all architectures we care about supporting) isn't
actually guaranteed by the language standard which allows much looser
semantics than actual exist on hardware.
Put it into the intmath section of this test as a build time thing.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
