Use auto-generated device tree macros in LIS2MDL driver to avoid
usage of dts.fixup code for it.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Use auto-generated device tree macros in LSM6DSL driver to avoid
usage of dts.fixup code for it.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Updated the GCOV_COUNTERS value, without which the coverage data
was corrupted when gcc 8.2 was used.
GH-12571
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Several places in the code have constructions like this:
if (bool_variable) {
atomic_set_bit(flags, FLAG);
} else {
atomic_clear_bit(flags, FLAG);
}
To reduce the amount of code for such situations, introduce a new
atomic_set_bit_to() helper which lets you condense the above five
lines to a single one:
atomic_set_bit_to(flags, FLAG, bool_variable);
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The old legacy APIs use net-app library and as that is being
removed, then the dependencies need to be removed also.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Include building the init tests with the new Link Layer
split architecture.
Has the data length update and controller privacy disabled
until they are implemented in the new architecture.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Basic test for poll() behavior. UDP sockets are used for simplicity
so far (poll-related paths for UDP and TCP are similar, though later
adding TCP explicitly for full coverage may be useful).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The idea is that we should have many, many tests. The only reasonable
way to achieve that is by making tests easy and pleasant to write,
and that requires common, easy to reuse infrastructure.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
1. Consistently use prepare_sock helpers.
2. Test not just client->server sending, but sending reply.
3. Send large packets (>1 net_buf fragment), not just small.
4. Check POSIX behavior on recv()ing datagram incompletely (the rest
should be discarded and next recv() should read next datagram.
5. More cleanroom testing, e.g. explicitly reinitialize input params
on each call (without assumptions that they're left with suitable
values from previous calls), clear input buffers before each read
operations, etc.
6. Reformat code. Previously it was very sparse, giving long test
functions, and thus impression that tests are complicated and hard
to write.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Share lis2dh driver among few accelerometer sensors that has
same register interface: LIS2DH, LIS3DH, LSM303DLHC, LIS2DH12,
LSM303AGR.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Use auto-generated device tree macros in LIS2DH driver to avoid
usage of dts.fixup files. The triggered interrupt part has been
slightly hacked to automatically understand whether only int1 is
configured or both int1 and int2.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
The original implementation allows a list to be corrupted by list
operations on the removed node. Existing code attempts to avoid this by
using external state to determine whether a node is in a list, but this
is fragile and fails when the state that holds the flag value is changed
after the node is removed, e.g. in preparation for re-using the node.
Follow Linux in invalidating the link pointers in a removed node. Add
API so that detection of particpation in a list is available at the node
abstraction.
This solution relies on the following steady-state invariants:
* A node (as opposed to a list) will never be adjacent to itself in a
list;
* The next and prev pointers of a node are always either both null or
both non-null.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Added tests for async UART API and test configuration for
nrf52840_pca10056 board.
For tests to work, RX and TX pins have to be connected together
and second UART is needed to output results to console.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
Add support to STM LIS2DS12 3-axis accelerometer driver.
The driver support I2C and SPI bus communication and both
polling and drdy trigger mode.
Currently it uses high resolution only as power mode.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
lib/ was starting to get messy and inconsitent. Files being either
dumped in the root or in sub-directories without a clear plan.
Move all library components into one single folder and call it 'os'.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Minor adjustments are done to the nRF clock_control and rtc_timer
drivers to make them usable on nRF9160 as well.
The arm_irq_vector_table test code is modified only because it uses
the function that has been renamed in the nrf_rtc_timer driver.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
There is an effort underway to make most of the Zephyr build script's
reentrant. Meaning, the build scripts can be executed multiple times
during the same CMake invocation.
Reentrancy enables several use-cases, the motivating one is the
ability to build several Zephyr executables, or images, for instance a
bootloader and an application.
For build scripts to be reentrant they cannot be directly referencing
global variables, like target names, but must instead reference
variables, which can vary from entry to entry.
Therefore, in this patch, we replace global targets with variables.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Prolong by 1 second the BT encrypted connection test, to ensure
there is enough time for the link itself to be encrypted.
Before this change the key was exchanged, but the 1st notification
(pass condition) was received before the link itself was encrypted.
With this change we wait for 1 notification more (1 second more),
and during that extra second the link is actually encrypted.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
printk is supposed to be very lean, but should at least not
print garbage values. Now when a 64-bit integral value is
passed in to be printed, 'ERR' will be reported if it doesn't
fit in 32-bits instead of truncating it.
The printk documentation was slightly out of date, this has been
updated.
Fixes: #7179
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add a configuration structure to sht3xd that holds instance-specific
parameters, implemented in a immutable statically allocated object
initialized with material from device tree binding aliases.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Fails sporadically on this platform and causing CI blockage.
Filed bug #12478. Should be reverted once bug is fixed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We have a new power management system and those samples have been
written for specific boards and using the application based power
management subsystem. We are getting new tests/samples that are generic
with the new subsystem, so remove those in favor of the new ones.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit adds a test case checking if ADC drivers can work properly
after discarding an invalid sampling request.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Apart from normal customizations of vendor specific parameters in ADC
configuration used in the test, a few more changes in test cases were
also introduced in commit 1bfa34f4fb.
This resulted in some parts of ADC API (like zero interval between
consecutive samplings) not being tested at all. This commit restores
the original behavior of the test cases (with added comments that
zero intervals are intentional).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Currently only nRF drivers need assignments of analog inputs to ADC
channels (ADC_CONFIGURABLE_INPUTS Kconfig option is activated only for
these drivers). Hence, there is no need to define ADC_xxx_CHANNEL_INPUT
labels for any other ADC driver as they will be ignored anyway.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
These were being truncated to 32-bits, and only 8
hex digits were supported.
An extraneous printk() at the beginning of the test
which was not being tested in any way has been removed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Change driver to get I2C address of sensor from the device tree like
most other sensor drivers that utilize device tree.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert lsm303dlhc_accel & lsm303dlhc_magn sensor driver to use new
defines so we can remove the dts_fixup.h code for it.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Driver for networking device Microchip ENC28J60 is used as SPI slave,
moved to DTS type definition. Samples echo_client and echo_server use
this device on Arduino 101 board.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
