Remove all ram restrictions in kernel tests and revisit all tests and
try to make them pass on all platforms.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
... because it is (required).
This makes a difference when building with CMake and forgetting
ZEPHYR_BASE or not registering Zephyr in the CMake package registry.
In this particular case, REQUIRED turns this harmless looking log
statement:
-- Could NOT find Zephyr (missing: Zephyr_DIR)
-- The C compiler identification is GNU 9.3.0
-- The CXX compiler identification is GNU 9.3.0
-- Check for working C compiler: /usr/bin/cc
-- ...
-- ...
-- ...
-- Detecting CXX compile features
-- Detecting CXX compile features - done
CMake Error at CMakeLists.txt:8 (target_sources):
Cannot specify sources for target "app" which is not built by
this project.
... into this louder, clearer, faster and (last but not least) final
error:
CMake Error at CMakeLists.txt:5 (find_package):
Could not find a package configuration file provided by "Zephyr" with
any of the following names:
ZephyrConfig.cmake
zephyr-config.cmake
Add the installation prefix of "Zephyr" to CMAKE_PREFIX_PATH or set
"Zephyr_DIR" to a directory containing one of the above files. If
"Zephyr" provides a separate development package or SDK, be sure it
has been installed.
-- Configuring incomplete, errors occurred!
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Because the sleep instruction issue for nsim_hs_smp, idle
loop is used to simulate behavior of sleep, so arch_cpu_idle will
forever loop. This causes cpu idle test loop, then the whole
context test timeouts.
as a fix, skip the cpu_idle test for nsim_hs_smp now.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
The commit b7e363661d added an additional
busy wait call in the `busy_wait_thread` function -- effectively making
the minimum time required for the thread to exit twice that of the
original implementation.
This commit updates the busy wait thread completion timeout to reflect
that change.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Set the TICK_IRQ on litex and rv32m1 based on DT_IRQN(). For litex we
use DT_NODELABEL(timer0) and on rv32m1 we use DT_ALIAS(system_lptmr) to
determine the timer device.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Kernel timeouts have always been a 32 bit integer despite the
existence of generation macros, and existing code has been
inconsistent about using them. Upcoming commits are going to make the
timeout arguments opaque, so fix things up to be rigorously correct.
Changes include:
+ Adding a K_TIMEOUT_EQ() macro for code that needs to compare timeout
values for equality (e.g. with K_FOREVER or K_NO_WAIT).
+ Adding a k_msleep() synonym for k_sleep() which can continue to take
integral arguments as k_sleep() moves away to timeout arguments.
+ Pervasively using the K_MSEC(), K_SECONDS(), et. al. macros to
generate timeout arguments.
+ Removing the usage of K_NO_WAIT as the final argument to
K_THREAD_DEFINE(). This is just a count of milliseconds and we need
to use a zero.
This patch include no logic changes and should not affect generated
code at all.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
We update README file to correct the text for k_cpu_idle
testing, since now we cover the test for both tickless
and non-tickless kernel configuration.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We fix the kernel.context test, so it tests the
implementation of k_cpu_idle for tickless kernel.
As most platforms now support tickless kernel by
default, this extension of the test is essential
to get coverage on k_cpu_idle() API.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The `xlnx,ttcps` binding, despite having the file name of
`xlnx,ttcps.yaml`, had the compatible property of `cdns,ttc`.
While it is true that the Xilinx ZynqMP platform embeds the Cadence
Triple Timer Counter (TTC) IP core, its TTC differs from the original
Cadence core in that it implements 32-bit counters, instead of the
16-bit counters defined in the original; hence, the Xilinx variant is
not compatible with the original Cadence version and should be treated
as a different device.
This commit changes the `xlnx,ttcps.yaml` compatible property to
`xlnx,ttcps` for the above reasons.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The `tests/kernel/context` test fails for the `qemu_cortex_r5` when the
icount emulation mode is used, because the Xilinx QEMU ignores the WFI
instruction when the icount parameter is specified.
This will be fixed in the Zephyr SDK 0.11.3 and this commit must be
reverted once the CI is updated to use this new SDK version.
For more details, see zephyrproject-rtos/sdk-ng#191.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
ARM cores may have a per-core architected timer, which provides per-cpu
timers, attached to a GIC to deliver its per-processor interrupts via
PPIs. This is the most common case supported by QEMU in the virt
platform.
This patch introduces support for this timer abstracting the way the
timer registers are actually accessed. This is needed because different
architectures (for example ARMv7-R vs ARMv8-A) use different registers
and even the same architecture (ARMv8-A) can actually use different
timers (ELx physical timers vs ELx virtual timers).
So we introduce the common driver here but the actual SoC / architecture
/ board must provide the three helpers (arm_arch_timer_set_compare(),
arm_arch_timer_toggle(), arm_arch_timer_count()) using an header file
imported through the arch/cpu.h header file.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
The seasonal overhaul of test identifiers aligning the terms being used
and creating a structure. This is hopefully the last time we do this,
plan is to document the identifiers and enforce syntax.
The end-goal is to be able to generate a testsuite description from the
existing tests and sync it frequently with the testsuite in Testrail.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Mark the old time conversion APIs deprecated, leave compatibility
macros in place, and replace all usage with the new API.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
After run Sanitycheck script I found out that test cases
had the same test case name in the test result .xml file.
For board itodk in .xml file was duplicated kernel.common test.
To get rid of it, I decided to change test cases names
for the kernel tests, contained name kernel.common.
Now only one test has kernel.common test name,
and will be no duplicated test cases names in the future.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Re-run with updated script to convert integer literal delay arguments
to k_thread_create and K_THREAD_DEFINE to use the standard timeout
macros.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Disabling SMP mode for certain tests was a one-release thing, done to
avoid having to triage every test independently (MANY are not
SMP-safe), and with the knowledge that it was probably hiding bugs in
the kernel.
Turn it on pervasively. Tests are treated with a combination of
flagging specific cases as "1cpu" where we have short-running tests
that can be independently run in an otherwise SMP environment, and via
setting CONFIG_MP_NUM_CPUS=1 where that's not possible (which still
runs the full SMP kernel config, but with only one CPU available).
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This driver was still using CONFIG_* values to determine its address,
IRQ, etc. Add a binding for an "intel,hpet" device and migrate this
driver to devicetree.
Fixes: #18657
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
These two tests were right at the knife edge of 16kb
on riscv64, and were not building with logging enabled
on that platform.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
With the upcoming riscv64 support, it is best to use "riscv" as the
subdirectory name and common symbols as riscv32 and riscv64 support
code is almost identical. Then later decide whether 32-bit or 64-bit
compilation is wanted.
Redirects for the web documentation are also included.
Then zephyrbot complained about this:
"
New files added that are not covered in CODEOWNERS:
dts/riscv/microsemi-miv.dtsi
dts/riscv/riscv32-fe310.dtsi
Please add one or more entries in the CODEOWNERS file to cover
those files
"
So I assigned them to those who created them. Feel free to readjust
as necessary.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The sleep test was checking that the sleep took no longer than "2
ticks" longer than requested. But "2 ticks" for fast tick rate
configurations can be "zero ms", and for aliasing reasons it's always
possible to delay for 1 unit more than requested (becuase you can
cross a millisecond/tick/whatever boundary in your own code on either
side of the sleep). So that "slop" value needs to be no less than
1ms.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Test needs trivial modification to account for new APIC timer code.
Eventually CONFIG_APIC_TIMER_IRQ, CONFIG_LOAPIC_TIMER_IRQ, etc. will
be consolidated into one CONFIG_TIMER_IRQ to reduce the noise a bit.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The Quark D2000 is the only x86 with an MVIC, and since support for
it has been dropped, the interrupt controller is orphaned. Removed.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
We missed converting DT_OPENISA_RV32M1_LPTMR_SYSTEM_LPTMR_IRQ to
DT_OPENISA_RV32M1_LPTMR_SYSTEM_LPTMR_IRQ_0.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Using void pointers as universal arguments is widely used. However, when
compiling a 64-bit target, the compiler doesn't like when an int is
converted to a pointer and vice versa despite the presence of a cast.
This is due to a width mismatch between ints (32 bits) and pointers
(64 bits). The trick is to cast to a widening integer type such as
intptr_t and then cast to
void*.
When appropriate, the INT_TO_POINTER macro is used instead of this
double cast to make things clearer. The converse with POINTER_TO_INT
is also done which also serves as good code annotations.
While at it, remove unneeded casts to specific pointer types from void*
in the vicinity, and move to typed variable upon function entry to make
the code cleaner.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Add LiteX timer driver with bindings for this device.
Signed-off-by: Filip Kokosinski <fkokosinski@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We needed to add support for the RV32M1_LPTMR_TIMER to the test so its
knows what the IRQ of the timer is.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
(Chunk 1 of 3 - this patch was split across pull requests to address
CI build time limitations)
Zephyr has always been a uniprocessor system, and its kernel tests are
rife with assumptions and outright dependence on single-CPU operation
(for example: "low priority threads will never run until this high
priority thread blocks" -- not true if there's another processor to
run it!)
About 1/3 of our tests fail right now on x86_64 when dual processor
operation is made default. Most of those can probably be recovered on
a case-by-case basis with simple changes (and a few of them might
represent real bugs in SMP!), but for now let's make sure the full
test suite passes by turning the second CPU off. There's still plenty
of SMP coverage in the remaining cases.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This board is unmaintained and unsupported. It is not known to work and
has lots of conditional code across the tree that makes code
unmaintainable.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move to latest cmake version with many bug fixes and enhancements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Rewritten Xtensa CCOUNT driver along the lines of all the other new
drivers. The new API permits much smaller code.
Notably: The Xtensa counter is a 32 bit up-counter with a comparator
register. It's in some sense the archetype of this kind of timer as
it's the simplest of the bunch (everything else has quirks: NRF is
very slow and 24 bit, HPET has a runtime frequency detection, RISC-V
is 64 bit...). I should have written this one first.
Note also that this includes a blacklist of the xtensa architecture on
the tests/driver/ipm test. I'm getting spurious failures there where
a k_sem_take() call with a non-zero timeout is being made out of the
console output code in interrupt context. This seems to have nothing
to do with the timer; I suspect it's because the old timer drivers
would (incorrectly!) call z_clock_announce() in non-interrupt context
in some contexts (e.g. "expiring really soon"). Apparently this test
(or something in the IPM or Xtensa console code) was somehow relying
on that on Xtensa. But IPM is a Quark thing and there's no particular
reason to run this test there.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
When TICKLESS_KERNEL is enabled, the current time in ticks is based on
a hardware counter and not interrupt delivery (which is the whole
point of tickless), so irq-locking does not prevent time from
advancing. Disable this test in that configuration.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
In the POSIX architecture, with the inf_clock "SOC", time does
not pass while the CPU is running. Tests that require time to pass
while busy waiting should call k_busy_wait() or in some other way
set the CPU to idle. This test was setting the CPU to idle while
waiting for the next time slice. This is ok if the system tick
(timer) is active and awaking the CPU every system tick period.
But when configured in tickless mode that is not the case, and the
CPU was set to sleep for an indefinite amount of time.
This commit fixes it by using k_busy_wait(a few microseconds) inside
that busy wait loop instead.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming every project "NONE"
defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names in the samples (and again, in
the tests folder) folder, small manual adjustments have been done.
Signed-off-by: Reto Schneider <code@reto-schneider.ch>
This test was written to assume that on idle the CPU would wake up on
the next tick boundary because of the timer interrupt. No such
interrupt arrives in tickless mode and it hangs forever.
A more whiteboxy test involving setting a clock timout will have to be
written for this feature if we want to keep it on tickless systems.
Alternatively we could move this test out of tests/kernel/context and
always disable tickless.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The theory behind this test seems to be that taking an IRQ lock should
prevent the advance of the kernel's tick counter. That works on
traditional timers only. In tickless mode the timer hardware/driver
is expected to be able to give us an answer for time independent of
interrupt delivery, so the test fails spuriously. The "bug" detected
is a feature of tickless!
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The system tick count is a 64 bit quantity that gets updated from
interrupt context, meaning that it's dangerously non-atomic and has to
be locked. The core kernel clock code did this right.
But the value was also exposed to the rest of the universe as a global
variable, and virtually nothing else was doing this correctly. Even
in the timer ISRs themselves, the interrupts may be themselves
preempted (most of our architectures support nested interrupts) by
code that wants to set timeouts and inspect system uptime.
Define a z_tick_{get,set}() API, eliminate the old variable, and make
sure everyone uses the right mechanism.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
bat_commit is an old and obsolete tag that has not been maintained over
time and was supposed to serve a purpose that is obsolete now. Also
rename core tag with kernel.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Prepend the text 'cmake_minimum_required(VERSION 3.8.2)' into the
application and test build scripts.
Modern versions of CMake will spam users with a deprecation warning
when the toplevel CMakeLists.txt does not specify a CMake
version. This is documented in bug #8355.
To resolve this we include a cmake_minimum_required() line into the
toplevel build scripts. Additionally, cmake_minimum_required is
invoked from within boilerplate.cmake. The highest version will be
enforced.
This patch allows us to afterwards change CMake policy CMP000 from OLD
to NEW which in turn finally rids us of the verbose warning.
The extra boilerplate is considered more acceptable than the verbosity
of the CMP0000 policy.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
On some architectures tick time cannot be expressed as integer
number of microseconds, introducing error in calculations using
sys_clock_us_per_tick variable.
This commit deprecates the sys_clock_us_per_tick variable and
replaces its usage by more precise calculations based on
sys_clock_hw_cycles_per_sec and sys_clock_ticks_per_sec.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The test was using ztest incorrectly exposing everything as one single
test function. We now have multiple tests that can be tracked back to
features and requirements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
