Pass the promiscuous mode OFF event properly to device driver
instead of just toggling the network interface flag.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Flush the promiscuous queue after all the clients have turned
off promiscuous mode. This makes sure that we do not leave any
RX packets hanging on the queue and waste memory.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If ARP header contains invalid fields then drop the packet.
Fixes#11257Fixes#11254Fixes#11253Fixes#11248
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Move misc/Kconfig options to where they belong. misc/Kconfig was used as
a catch-all, but we are now able to put things in a better place.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The channels assigned to the controller are reordered so that the ones
previously used and now available for other purposes have continuous
numbers. When the controller can take advantage of the pre-programmed
PPI channels (when TIMER0 is used as the event timer), the now free
channels are 0-4, when it cannot, it is the channel 0.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Several PPI channels in nRF5 family SoCs are pre-programmed with fixed
settings. A few of them can be used in the bluetooth controller instead
of the freely programmable ones that are used currently. This commit
makes such replacements where possible so that the universal channels
can be left available for other purposes.
This commit also removes macros used previously in calls to functions
enabling and disabling particular PPI channels (as it is sufficient
to use the BIT macro to set bits corresponding to the channel numbers)
to prevent such problems like the one introduces by commit
9d1ca9c390 (channel 18 changed to 17
but the related macro definition not updated).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Changed LOG_MODULE_REGISTER and LOG_MODULE_DECLARE macros to take log
level as optional parameter. LOG_MODULE_DECLARE can now also be used
in static inline functions in headers. Added LOG_LEVEL_SET macro
which is used when instance logging API is used to indicate maximal
log level compiled into the file.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Couple of findings which were revealed after changing
LOG_MODULE_REGISTER macro:
- missing semicolons after LOG_MODULE_REGISTER()
- missing LOG_LEVEL defines
- other
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Introduce new Kconfig option for selecting either slip or ethernet
connectivity to host.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The code referenced CONFIG_SHELL_VT100_COLORS_ENABLED which does not
exist. Its mostly likely that CONFIG_SHELL_VT100_COLORS was meant
to be tested instead.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The endif comment block is for CONFIG_BT_FIXED_PASSKEY not
CONFIG_SMP_FIXED_PASSKEY. Fix the comment to match.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
BT_LE_ADV_CONN_DIR_LOW_DUTY declares a local variable so it cannot go
out of scope, so instead of assigning in the scope of the if statement
this rework the code to mantain the declaration in the same scope it is
used.
Fixes#10570
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Verify incoming ARP packet hardware and protocol type. Drop
unknown type of packets.
Fixes#11215Fixes#11217
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This makes mesh shell to register commands with the new shell subsystem
and stop using the legacy shell.
Fixes#11056
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This allows the shell core to perform precheck before calling the
handler which then can assume the number of arguments is correct.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
FD method tables contain function pointers, and thus should be
const and reside in ROM. This patch fixes all cases of FD vtable
definitions: for POSIX FS API and for sockets.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If we change the ethernet MAC address, then we must also remove
the old IPv6 interface identifier (iid) address from the
interface. Otherwise there might not be enough space in the IPv6
address array for the new iid address and beside the old iid
address is not useful any more after the MAC address is changed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that IPv4 specific functions are callable even if
IPv4 is not enabled. This allows use of IS_ENABLED() macro
in other parts of the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that IPv6 specific functions are callable even if
IPv6 is not enabled. This allows use of IS_ENABLED() macro
in other parts of the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
With multiple devices on auto-connect list it is possible that while
having pending connection to device A, device B disconnects. In that
case host should not try to start scan (currently controller doesn't
support concurrent scanning and initiating).
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
This commit moves the BLE GATT Device Information service
from /samples/bluetooth/gatt to /subsys/bluetooth/services and adds
a Kconfig entry to enable and configure the service;
when enabled, it will register itself automatically.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
Currently, if CONFIG_LOG_PROCESS_THREAD is enabled, log processing
does not start until just before the main() function is called in
the user sample. This means that no real-time logging information
will be sent to the backends while drivers and/or other processes
which are triggered during kernel boot are processing their tasks.
Worse, if they take a longish time to finish, the user is
presented with a blank log backend regardless of the debug levels.
Let's start processing logs earlier to avoid this issue.
NOTE: Since this thread is now triggered specifically rather than
started during static thread init, let's also name it.
Signed-off-by: Michael Scott <mike@foundries.io>
This adds a possibility to unregister GATT SMP service.
Using this function, device can disable Firmware Update
functionality, if not needed.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Add support for exchanging both minimum and maximum
connection interval values in Connection Parameter Request
Procedure implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Improved RX path to use ring buffer for incoming data instead of single
byte buffer. Improved TX path to use ring buffer. Added support for
asynchronous UART API (interrupts).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The Atmel SAM E70 flash has a 16-byte write block size. Increase the
NVS_BLOCK_SIZE a bit and take some margin. This might also improve the
performances by reducing the calls to the flash driver when moving data
during garbage collection.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When the write block size is bigger than sizeof(nvs_ate), which is 8
bytes, we should not read or write more than the ATE. The
_nvs_flash_al_wrt() function will take care of padding the write with
0xff up to write_block_size. Of course the addresses should still be
incremented by write_block_size.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
VLA are usually not recommended and are a MISRA C violation. Replace
fs->write_block_size by NVS_BLOCK_SIZE as we now have a check at
initialization that ensures that fs->write_block_size <= NVS_BLOCK_SIZE.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
In case the write block size is bigger than NVS_BLOCK_SIZE, some
functions end up in an endless loop. Detect the unsupported cases
at initialization.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Fallback to L2CAP Connection Parameters Update Request if LL Connection
Update Request was rejected by remote device that has this marked as
supported in features. This can happen if procedure is supported only
by remote controller, but not enabled by host. This is connection
parameters update with iOS devices.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
According with MISRA-C and unconditional break statement must
terminate every switch-clause.
MISRA-C rule 16.1 and 16.3
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The code had somehow gotten corrupt (yet in a way that it compiles) so
that an intended if-branch was missing.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
No need to evaluate what's the ll reserve size here as net if has a
function to do so.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If the destination IPv6 address is interface local scope multicast
address FF01::, then loopback those packets back to us as that is
the purpose of those addresses. They are to work same way as
localhost unicast address. See RFC 3513 ch 2.7 for details.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If IPv6 is disabled, then we can skip IPv6 checks and avoid
Coverity warnings. Same thing for IPv4.
Coverity-CID: 189506
Fixes#11100
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This will exclude GATT Client response handlers from compilation
if GATT Client support is disabled.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
