Fix LENGTH_RSP and PING_RSP to be send after Encryption
Setup under the cases where LENGTH_REQ or PING_REQ cross-
over with ENC_REQ in the same connection event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Overlapping Feature Exchange requested by host with
Encryption Setup requested by the application caused the
controller to corrupt its Tx queue leading to Tx Ctrl PDU
buffers from leaking from the system.
Fixes#21299.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Backend initialization code has been moved from common settings_init.c
to proper backend source files. Missing static specifiers have been
added.
Minor cleanup has been done to source files: exported functions have
been moved to the end of source files and definitions of static
variables, that are used by only a single function, have been moved from
global scope into functions that use them.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Timestamp and RecordRoute options are supported
in only ICMPv4 EchoRequest call as per
RFC 1122 3.2.2.6.
Fixes#14668
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
IPv4 header options length will be stored in ipv4_opts_len
in net_pkt structure. Now IPv4 header length will be in
net_pkt ip_hdr_len + ipv4_opts_len. So modified relevant
places of ip header length calculation for IPv4.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
OpenThread recently introduced CMake build system into its repostiory
so we no longer need autotools to build OpenThread libraries and can
integrate them natively.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The TCP code expects that we know when the socket has called accept()
in order to continue connection attempt.
Fixes#21335
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
constexpr and noexcept were introduced as specifiers in C++11. Avoid
referencing them when compiling for earlier versions of the language.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
In the count_s() function, with -Wchar-subscripts, GCC warns
about array subscript having type ‘char’ with the isalpha()
call. Since isalpha() takes an int, so do a type-cast there
to get rid of the warning.
This happens on XCC which is based on GCC 4.2.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Fix leak of the node_rx buffer when processing the LL version ind as a
priority event. This leak meant being able to establish new connections
was no longer possible, because there weren't enough events to process
the all the events during connection establishment. And instead the LL
ignored the connection request sent by the peer.
Removed the inline extern declaration of a function which had a proper
header included.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This documents the special cases where -EAGAIN is returned which leads
the buffer to be queued.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Now that bt_l2cap_send_cb can fail the buffer state needs to be save
and restored otherwise the data stored on it would be lost.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This introduces BT_L2CAP_STATUS_SHUTDOWN which is used to indicate when
a channel has been shutdown.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Packets shall never fail to be sent now that they are queued, so if an
error occured there is no point in keep the channel connected.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This offloads the processing of tx_queue to a work so the callbacks
calling resume don't start sending packets directly which can cause
stack overflow.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Drop packets received while disconnecting since they would most likely
be flushed once peer respond there is no gain in keeping them on a
queue.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This prevents disconnect request packets to not being sent due to lack
of buffers normally caused by flooding or congestion.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If NET_L2_BT is enabled we need enough acl_in_pool needs to be big
enough to contain a full IP packet since that is no longer processed by
RX thread buffer would be queued to syswq to reassemble the SDU.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When NET_L2_BT the memory pressure for fragments can be quite high
since that would be transfering IP packets which are considerable big
so this makes our frag_pool to be of the same size as NET_BUF_TX_COUNT.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enable chaning the function and line number making it easier to
debug where a buffer allocation is blocking.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When a segment could not be allocated it should be possible to resume
sending it later once previous segments complete, the only exception is
when there is no previous activity and we are unable to alocate even the
very first segment which should indicate to the caller that it would
block since that only happens on syswq the caller might need to defer to
another thread or resubmit the work.
Fixes#20640
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Functions like `setup_ipv4` or `setup_ipv6` might already use the
`counter` semaphore, therefore it should be initialized before these
functions are called.
As a result of this issue, the network stack could stall until timeout
under certain circumstances (e.g. when OpenThread was used).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add command to print all existing connections. Useful for verifying that
connections are actually released when debugging.
More information can be retrieved with `bt info <addr>` using the
address printed by this command for each connection.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add command to print all existing bonds. Useful for verifying that bonds
are actually cleared when debugging.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix implementation for the missing reset of version
information procedure request state value.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
An expired IPv6 router would cause an infinite loop where
iface_router_run_timer() repeatedly scheduled a work item. In some
conditions it would schedule with negative delay, in other conditions
the infinite loop wouldn't happen until a router was added again.
Get rid of the router from active_router_timers when it is removed.
Fixes#21339
Signed-off-by: Jonas Norling <jonas.norling@greeneggs.se>
Assuming that fs_seek has been successful; in case when fs_write
would be unsuccessful and fs_close, that follows, would be successful,
the success code would have been returned for the entire procedure,
although it has failed.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The whitelist API uses the controller directly through HCI commands.
Bluetooth device must have been initialized before sending HCI commands.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Move invalidation of connection handle when flushing TX buffers into
LLL context. Otherwise, LLL may or may not see invalidated handle
depending on mayfly scheduling.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
If the duration to publish is roughly the same as the period, we might
end up with elapsed == period, which returns 0 and cancel the periodic
publication. Instead 1 should be returned, just like when the elapsed
time is greater than the period.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Without this fix is it not possible to terminate pppd and restart
pppd afterwards without restarting the firmware, too.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
Without this fix is it not possible to terminate pppd and restart
pppd afterwards without restarting the firmware, too.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
Unifies the Mesh CCM implementation parts for encryption and decryption
into a crypt and an auth step, reducing stack usage and code size.
This change also brings several performance improvements, most notably
reducing copying of the nonce and unrolling the 16 byte XOR operations.
Performance for the Mesh worst case of a 382 byte payload with 16 bytes
of additional data (full transport encrypt with virtual address) goes
from an average of 889us to 780us on nRF52840 with default optimization
flags.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Remove leading/trailing blank lines in .c, .h, .py, .rst, .yml, and
.yaml files.
Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.
Move the 'target-notes' target in boards/xtensa/odroid_go/doc/index.rst
to get rid of the trailing blank line there. It was probably misplaced.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Handle invalid ACL flags in HCI transport.
Only Point to Point is supported over HCI in both directions.
Fix flushable start HCI ACL packets not allowed on LE-U connections
from Host to controller.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
In bt_l2cap_br_chan, rx.cid is the local cid and tx.cid is the
remote cid. According to Core-5.0 Vol3.Part A 4.6-4.7,
l2cap_br_remove_tx_cid should be searched using tx.cid
Signed-off-by: ZhongYao Luo <LuoZhongYao@gmail.com>
According to BT Spec v5.1 Vol 2 Part E Section 7.8.16, if the
device is already in the White List, the controller should not
add the device to the White List and should return success.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
According to BT Spec v5.1 Vol 2 Part E Section 7.8.16, if the
device is already in the White List, the controller should not
add the device to the White List and should return success.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
If the whitelist already exists in the controller then the controller
should not add the device tot the whitelist and should return success.
In that case the counting of entries in the whitelist in the host will
be wrong.
Remove all whitelist counting in the host, and instead rely on the error
reported by the controller for this.
The controller should return error if the whitelist is full.
The controller should return error if use of whitelist was requested but
the whitelist was empty.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
