Use 24-bit functions for byteorder and net_buf in order to make the
byteorder used more readable.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix tx_time calculation for the case that BT_CTRL_PHY is defined and
there has not been a feature exchange.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix tx_time calculation for the case that BT_CTRL_PHY is defined and
there has not been a feature exchange.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Credits are 2 octects long so an s16_t positive portion can only half to
the theorical maximum number of credits, so instead this uses u16_t and
do a bound check instead of checking for negative values.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
With the changes that introduced a queue k_sem is only used with
K_NO_WAIT which means it is no longer possible to wait/block for credits
so the usage of k_sem is no longer needed and can be safely replaced
with atomic_t just to count the available credits at a given instant.
Fixes#19922
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add printing of the remote version information whenever the new
CONFIG_BT_REMOTE_VERSION option is enabled.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Make remote features and remote version accesible to the application
through the bt_conn_get_remote_info object. The host will auto initiate
the procedures. If the procedures have not finished with the application
calls bt_conn_get_remote_info then EBUSY will be returned.
The procedures should finish during the first 10 connection intervals.
Signed-off-by: Sverre Storvold <Sverre.Storvold@nordicsemi.no>
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Refactor the handling of the host auto initiated LL procedures.
This makes it easier to add new auto initiated procedures as well as
reduced the maintenance by reducing code duplication.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This commit reverts the change that moved the remote version event from
a priority event to a normal event. This is done because the strategy
for using this event has been changed and will be used with a callback
instead of a semaphore that could be locked from the RX thread.
This commit retains the infrastructure that was added in the controller
so that moving events to priority processing is still possible.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
A single menu within an if like
if FOO
menu "blah"
...
endmenu
endif
can be replaced with
menu "blah"
depends on FOO
...
endmenu
Fix up all existing instances.
Also remove redundant extra menus underneath 'menuconfig' symbols.
'menuconfig' already creates a menu.
Also remove the menu in arch/arm/core/aarch32/Kconfig around the
"Floating point ABI" choice. The choice depends on FLOAT, which depends
on CPU_HAS_CPU, so remove the 'depends on CPU_HAS_FPU' too.
Piggyback removing a redundant 'default n' for BME280.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This commit introduces a new Kconfig symbol MCUMGR_SMP_BT_AUTHEN.
When selected it configures the Bluetooth mcumgr transport to require
an authenticated connection.
If the Bluetooth mcumgr transport is selected then this new symbol is
selected by default. Bluetooth SMP is also selected to ensure Zephyr
is configured with Bluetooth security features enabled to provide
Bluetooth authentication APIs to the user's app. Users can choose to
disable this level of security for the Bluetooth mcumgr transport if
they do not require it.
Fixes#16482
Signed-off-by: Nick Ward <nix.ward@gmail.com>
SPIN_VALIDATE is, as it was previously, enabled per default when having
less than 4 CPUs and either having no flash or a flash size greater than
32kB.
Small targets, which needs to have asserts enabled, can chose to have
the spinlock validation enabled or not and thereby decide whether the
overhead added is acceptable or not.
Signed-off-by: Danny Oerndrup <daor@demant.com>
Add two new kconfig options USB_SELF_POWERED and USB_MAX_POWER.
These can be set by the user to change the USB configuration descriptor.
USB_MAX_POWER can be set to any value between 0 and 250, but practically
should be 50 or 250. These values are half the ammount of mA that the
device will tell the host that it needs.
USB_SELF_POWERED sets the 7th bit in bmAttributes of the USB config
descriptor. Should be set to y if the device has its own power source
other than USB.
Signed-off-by: Barry Solomon <barry.solomon@dexcom.com>
Until now HID class derived log level from USB stack.
By this commit new Kconfig option for HID specific log
level is introduced.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Before introducing the code for ARM64 (AArch64) we need to relocate the
current ARM code to a new AArch32 sub-directory. For now we can assume
that no code is shared between ARM and ARM64.
There are no functional changes. The code is moved to the new location
and the file paths are fixed to reflect this change.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Always check that the length of the returned command complete
event for a vendor specific command matches the expected length
when the support for Zephyr VS HCI commands are uncertain.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix multiple issues related to the way the host handles
Identity Information related to privacy
1. If the controller provided a public address the IRK
for this identity would be randomly generated but not
stored persistenly.
2. Fix the handling of the above issue which was fixed
for the random address but would initiate settings save
ID on every boot.
3. Fix the host not using the Vendor Specific HCI commands
related to retrieving the Identity Root (IR) from the
controller and using the key diversified function d1
to generate an IRK as specified in the BT Core spec.
Make sure that a Host generated ID is only saved when it is first
generated.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Return the IR defined in FICR as the Identity Root for the static
address through the read static addresses command instead of providing
it through the Read Key Hierarchy Root command.
This is following the recommendations in the Zephyr HCI extension
document in doc/reference/bluetooth/hci.txt
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix controllers address check in cases of controller-based privacy.
When controller has been instructed by the host to use privacy
the controller should look up the peer identity address and generate
an address based on the local IRK. In the case where no match
is found or the local IRK is all zeroes the controller shall use
the fallback address. If the fallback address is not valid the
controller shall return invalid params.
This commit fixes these issues:
- Starting a private advertiser without valid random address set
but a valid local IRK exists. In this case the advertiser should
be able to advertise using the RPA regardless of a valid random
or public address.
- Starting a private advertiser with a fallback to the public
address type or an adveriser using public address does not
check if a valid public address exists. The host cannot
advertise with an all-zero public address.
Signed-off-by: Joakim Andersson <joerchan@gmail.com>
When using LLVM/Clang, it complains about memcpy() being
casted to (void *):
warning: expression result unused; should this cast be to 'void'? [-Wunused-value]
So change those to (void) instead as the return of memcpy()
is not used anyway.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Algorithm for freeing strdup buffers was only checking if argument
matches address within strdup buffer pool and was attempting freeing
even if format specifier was different than string.
Added fix where also format specifier is checked.
Extended logger test to verify correctness of function which searches
for string format specifiers within a string.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Due to flipped logic is_irq_locked function was returning true then
interrupts were unlocked. Because of that CONFIG_LOG_BLOCK_IN_THREAD
feature was not working correctly and wasn't locking thread context
when log message buffer pool was empty.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
By this commit user gets possibility to register USB
device satutus callback. This callback represents device state
and is added so user could know what happend to USB device.
Callback is registered by providing it to usb_enable()
USB api is extended by this callback handler.
Samples using using USB are by default provide no callback
and the usb_enable() is called with NULL parameter.
Status callback registered by hid class is deleted as now
USB device has global callback for all classes within device.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
The purpose of this commit is to prevent user from
calling usb_enable() twice from different contexes.
If for example user configures composite device with hid
and USB uart console (CONFIG_USB_UART_CONSOLE=y)
then introduced mutex will prevent from calling
usb_enable twice and thus lead to undefined behaviour of
usb driver controller.
usb_enable shall always be called once as it refers to usb driver
and for now only one USB driver instance is supported in Zephyr.
This mechanism ensures that.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
The test_and_set_bit() should be checking if the flag was *not*
already set, since that's the scenario where we want to call the
status callback.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The ch pointer is the result of a CONTAINER_OF() operation, so
checking it for NULL is pointless. Additionally, there's no place that
calls this function with chan set to NULL.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Make the channel ops struct const since there really isn't anything
there that needs to change at runtime. The only exception is the L2CAP
shell which was playing with the recv callback, however that can be
fixed by introducing a simple bool variable.
With tests/bluetooth/shell this reduces RAM consumption by 112 bytes
while adding only 16 bytes to flash consumption.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Maintain a simple count of how many PINGREQ have been sent for the
current connection that have not had a corresponding PINGRESP. Nothing
is done with this information internal to the MQTT driver, but it is
exposed to the application layer to monitor as desired.
Signed-off-by: Justin Brzozoski <justin.brzozoski@signal-fire.com>
Ensure that RTT and xtensa_sim backends are using single byte
log_output buffer.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
When in immediate mode ensure that buffering is not used in log output.
Every byte is pushed to the transport.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Remove the 4us advanced radio reception, the implementation
passes all timing conformance tests without this.
This change should reduce some radio power consumption by
avoiding redundant reception duration.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Previously, there were two issues when attempting to use LOG_HEXDUMP_*
from C++:
First, gcc and clang in C mode both allow implicit pointer conversion
by default, but require -fpermissive, which no one should ever use, in
C++ mode. Furthermore, -Wpointer-sign, the warning emitted in C for
convertion between pointers to types of different signedness (e.g. char*
vs u8_t*) is explicitly disabled in Zephyr. Switch the various hexdump
functions to void*, which is guaranteed to work in both languages.
Second, the soon-to-be-standardized C++20 version of designated
initializers requires that the designators appear in the same order as
they are declared in the type being initialized.
Signed-off-by: Josh Gao <josh@jmgao.dev>
If the test exits from some APIs like ztest_test_pass(),
ztest_test_skip(), or a test crashes out, the teardown
function is never run.
Fixes: #16329
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The commit 8892406c1d ("kernel/sys_clock.h: Deprecate and convert
uses of old conversions") changed code to not use deprecated macro.
Unfortunately there was some changes done to RX TC stats update that
were missing from that commit. This commit fixes the issue and removes
the last user of the deprecated SYS_CLOCK_HW_CYCLES_TO_NS64() macro.
This is follow up to commit 5bbdf56769 ("net: stats: Fix RX time
statistics update") which failed to remove all users of the deprecated
macro.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Based on work by Michael Scott.
Add a new Kconfig knob, CONFIG_LWM2M_IPSO_TIMESTAMP_EXTENSIONS. This
defaults to n. When enabled, various IPSO objects will by default have
the timestamp resource (5518) added to their representations. This can
be turned off on a per-object basis.
The idea of adding timestamp resources was originally suggested by
Hannes Tschofenig on this OMA page:
https://github.com/OpenMobileAlliance/OMA_LwM2M_for_Developers/issues/429
Signed-off-by: Michael Scott <mike@foundries.io>
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The commit 8892406c1d ("kernel/sys_clock.h: Deprecate and convert
uses of old conversions") changed code to not use deprecated macro.
Unfortunately there was some changes done to RX stats update that were
missing from that commit. This commit fixes the issue and removes use
of the deprecated SYS_CLOCK_HW_CYCLES_TO_NS64() macro.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Follwing the convention in Zephyr, all CMake configuration related to
a module, should be placed within the module repostiory.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Low frequency and high frequency clocks had separate devices
while they are actually handled by single peripheral with single
interrupt. The split was done probably because opaque subsys
argument in the API was used for other purposes and there was
no way to pass the information which clock should be controlled.
Implementation changes some time ago and subsys parameter was
no longer used. It now can be used to indicate which clock should
be controlled.
Change become necessary when nrf5340 is taken into account where
there are more clocks and current approach would lead to create
multiple devices - mess.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Fix LENGTH_RSP and PING_RSP to be send after Encryption
Setup under the cases where LENGTH_REQ or PING_REQ cross-
over with ENC_REQ in the same connection event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Overlapping Feature Exchange requested by host with
Encryption Setup requested by the application caused the
controller to corrupt its Tx queue leading to Tx Ctrl PDU
buffers from leaking from the system.
Relates to #21299.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit targets solving issue #17731 over the Nordic LL LEGACY
arch of the BLE stack in Zephyr. This functionality is exposed
to the user as HCI Zephyr Command extensions
- BT_HCI_OP_VS_WRITE_TX_POWER_LEVEL
- BT_HCI_OP_VS_READ_TX_POWER_LEVEL
which enable Tx power read/write operations within BLE radio events
on a per role/connection basis.
The functionality is enabled upon the Kconfig advanced configuration
triggered by
- BT_CTLR_TX_PWR_DYNAMIC_CONTROL
depending on the enablement of Zephyr HCI vendor-specific command
extensions.
Signed-off-by: Andrei Stoica <stoica.razvan.andrei@gmail.com>
This commit targets solving issue #17731 over the LL_SW_SPLIT
arch of the BLE stack in Zephyr. This functionality is exposed
to the user as HCI Zephyr Command extensions
- BT_HCI_OP_VS_WRITE_TX_POWER_LEVEL
- BT_HCI_OP_VS_READ_TX_POWER_LEVEL
which enable Tx power read/write operations within BLE radio events
on a per role/connection basis.
The functionality is enabled upon the Kconfig advanced configuration
triggered by
- BT_CTLR_TX_PWR_DYNAMIC_CONTROL
depending on the enablement of Zephyr HCI vendor-specific command
extensions.
Necessary low-level radio HAL functionality and power definitions
are also supplied to address the high-level functionality of
controlling the Tx power.
Signed-off-by: Andrei Stoica <stoica.razvan.andrei@gmail.com>
