Users can locate and edit these easier when they are at the
top as a #define.
Change-Id: Iecb53999cef1e70a80a28c7be5664ccde0fe7acf
Signed-off-by: Michael Scott <michael.scott@linaro.org>
By moving panic() function up to the top, other functions can be moved
later and still be able to call it.
Change-Id: I4290d1509cc64fc3f5fc5ec109cc19058090e6dd
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Instead use helper function where necessary.
Change-Id: Idcb47d02966731d7ef18588d1dccc8031a38d9d0
Signed-off-by: Michael Scott <michael.scott@linaro.org>
The aim of this helper function is to remove duplicate code for setting
the parameters of in_addr structures.
Change-Id: Id882a5947c47a9b6f92924ce8fb04023540fbb8d
Signed-off-by: Michael Scott <michael.scott@linaro.org>
This allows for a set app stack and threaded functions to be used later.
Change-Id: I647a3defdf6eb4cca2a4a21192b20641f5bf8d4a
Signed-off-by: Michael Scott <michael.scott@linaro.org>
This is a sample IRC bot program, written using the new IP stack API.
All it does is join an IRC channel, wait for some commands, and react
to them:
!hello will greet whoever sent the command
!random will generate a pseudo-random number and send it back
!led_toggle will toggle an LED in the board [1]
!led_on will turn the LED on regardless of its current state
!led_off will turn the LED off
!rejoin will part the current channel and join again
!disconnect will quit from the IRC server
As far as the IRC protocol goes, it doesn't do much more than this, but
it should be straightforward to add support for other things (such as
notices, CTCP, DCC, etc) if someone is inclined to do so. However,
that's way beyond the scope of this sample, which is to show how to use
the network API to write a TCP client.
Some things are still missing as an example of how to use the APIs,
namely DNS resolution, automatically setting up the network with DHCP,
maybe saving settings on EEPROM. These are good candidates to be added
in the future.
[1] The LED code has been shamelessly stolen from the CoAP sample code.
Change-Id: I7152e97c0726f3559db545579ae8ae8d07bf04cd
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Signed-off-by: Michael Scott <michael.scott@linaro.org>
It will setup IPv4/IPv6 addresses. Telnet is ran in the background,
along with net and kernel shell modules.
See the README.rst for more information how to start and use this
sample.
Change-Id: I3e935014c79b534aab43a6fa8256792b23abb38e
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Allow build-testing zoap-server with support for the CC2520 radio.
Change-Id: I986afd7b15208d477bd79f42a52dd45b217214cb
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
In case the user wants to use BOARD make variable to conveniently use
another board with this sample.
Change-Id: I6dd0656da223218d116dd498c1336c890563b212
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
net_addr_ntop() will convert IPv4|6 address to string form.
Renamed existing net_sprint_ip_addr_buf() to net_addr_ntop()
and adjusted parameters as per API.
Jira: ZEP-1638
Change-Id: Ia497be6bf876ca63b120529acbadcfd9162a96e3
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This configuration file allows using the device 802.15.4 radio for
IPv6 networks.
Change-Id: I9b3ee9a64acb71e97e4e8f7aae3e619196ad0462
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Currently, the function accepts a struct sockaddr * but the code
immediately type casts this to either in_addr or in6_addr. This is
incorrect behavior as the first field in a sockaddr is sa_family_t
and not address data.
So without special knowledge, a developer will use a sockaddr structure
as the parameter and then wonder why the address information isn't being
set correctly.
Let's change this parameter to void * which makes this function similar
to inet_pton().
Jira: ZEP-1616
Change-Id: I1fc9368da999d90feb07c03fac55dcc749d4eba6
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Tested on Atmel SMART SAM E70 Xplained board
Origin: Original
Jira: ZEP-1492
Change-Id: If6acbaabf0857425684e0ab2d4db513e5bbc7b77
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
bytes_read should be an int, all uses of it in this sample are of type
int. Lets clean this up so when building with newlib or in the future
when uint32_t might change its definition we don't have issues.
Change-Id: Ief7bfb48948df50cec45b4707ef7676d13173f34
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
There are a few arrays we use with print_number and parse_number. These
functions expect a const uint32_t so lets have the arrays for TIME_US,
KBPS, and K match.
Change-Id: I6347b06af2374d702144084bb6b538a478fb8fac
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Instead of using a hard-coded string, make the sample use the Kconfig
variable for the device name.
Change-Id: Ib09f594e1cba221f9064318572bd90d38bd2733a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Change BREDR_NAME to DEVICE_NAME so it can also be used as the LE
device name.
Change-Id: I9ef55d9dff098372d47d9d5754ad7a7163a65bc0
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
SENSOR_CHAN_*_ANY will be deprecated, so use the new SENSOR_CHAN_*_XYZ
enum values.
Change-Id: I91cf25864613a934feab65588969d10c52fd4fe6
Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
This commit enables echo-client application to start to
send data over TCP connection.
Change-Id: I9acdaae7f1e8411952c30caeedc9c1fb07cdd448
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Option CONFIG_NET_IPV6_NO_DAD is not used anymore, clean project
configuration files.
Change-Id: I368e076d2f79f1d4bc86edee11ff5befe37362c8
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The cause for this change is TCP. Until now, the radio strategy driver
(ALOHA or CSMA) was providing the actual nbuf, and not the buffer
fragment, counting on the fact that the loop was using
net_buf_frag_del() which made so, iteration after iteration, buffer
framgent to be always buf->frags. The problem with this logic is loosing
the fragments that might be still referenced by TCP, in case the whole
buffer did not make it so TCP can retry later and so on.
Instead, TX now takes the nbuf and the actual frag to send. It could
have been working with just a pointer on the data, and the whole length
of the frame. But it has been avoided due to possible future devices,
that will be smarter and run CSMA directly in the hw, thus it will
require to access the whole buffer list through the nbuf.
Change-Id: I8d77b1e13b648c0ec3645cb2d55d1910d00381ea
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The option is no longer used so it can be removed.
Use CONFIG_NET_IPV6_ND option instead.
Change-Id: Ibaa3d3deb52b8b176e85f8b9e1d8c80c1026aea1
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This is meant to test telnet console easily, as echo_server already
enables net shell module etc.
Change-Id: I045340ae5d6e179ea5ce1416cd7d67c6956bd973
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add configs for MCR20A device to echo_server and echo_client.
Change-Id: Ic0e310c0eb2eefe6ce5752a20b0c079b7ea8757c
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Only CONFIG_NET_SLIP_TAP will select SLIP, UART_PIPE,
UART_INTERRUPT_DRIVEN and SLIP_TAP. Otherwise apps will crash on
qemu.
Jira: ZEP-1617
Change-Id: Ibefbe708deb05e28b43ed4225211a5af655cec8d
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Use printk(), snprintk() instead of printf() and snprintf().
CONFIG_STDOUT_CONSOLE is anyway disabled by default so printf()
will not output anything without it.
Change-Id: Ide24e4d669e9821289189ed28e30a596120d9611
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Instructions to verify DHCPv4 client functionality in QEMU and
FRDM_K64F.
Change-Id: I623128186387c0c3237c8e759b949a3d0fde0993
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
After queueing full packet to RX queue we set pkt_curr to NULL, if we
get right after that SLIP_END we shall check for pkt_curr to avoid
NULL pointer assignment.
Coverity-CID: 157574
Change-Id: I2be40a652867e73b4a1994f529dc21980ecb35b4
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Some applications are not prepared for using multicast address and
specifying the interface, so it may be convenient for the user to be
able to use a unicast address when communicating with the
samples. This aligns this sample with most of the networking samples.
Change-Id: Ic97ea5a346a650751b6e2cbfefad25a3e700278c
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Samples instructions are to follow the rst format so they are
consistent with the rest of the documentation.
Change-Id: I37f06139484a4632e5b9c720ce1317feab68358b
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Add a label in the arduino 101 document for the flashing
bluetooth instructions, and link to that instead of the
wiki page (deprecated).
Change-Id: Ie39240cdf4881356f634d21ead1d7ae93ccd60a1
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Change hard url into :ref: to board documentation
Change-Id: I9d8a585bb0e7274cf3233eadac2e303cc98ef86a
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
At the default sample rate of 400 Hz, there is not enough bandwidth on
the UART at 115200 baud to print every sample. Fix by decimating the
sensor data by 4 before printing to the console.
This issue was discovered after fixing ZEP-1507.
Change-Id: I451ec9873ca93fe417d5d5a2d6d13b5e921c7611
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Changed README to RST and updated the formatting.
Jira: ZEP-1537
Change-Id: I012854daff6883cf462a3cc0246c73a8767dcd66
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
