The kernel provides an API call to get the least signficant 32 bits of
system time, use it rather than reaching under the hood.
Change-Id: I98fabdcadfd0a4fe5ae10226dabf4e6d31e88df6
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The kernel provides an API call to get the least signficant 32 bits of
system time, use it rather than reaching under the hood.
Change-Id: I9c303ef949f7670f2a2d9691c342e496873e96e6
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Core stack is not removing the network buffer if app data length
is zero. So memory leak happening here.
Change-Id: I3d354b5e7008396ca7cb977631036871998165b4
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Using net_buf_unref() technically works but debugging the network buffer
allocations is more difficult if done like that.
Change-Id: Ib8e3f8b412c2f8388315c2f63cae4392f814ea2f
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
size_t has different types depending on the arch selected for
building. Correct format identifier is %zu in this case.
Change-Id: I4388fcd8c5eb8bcd5997bb921bd80b4c2175b24c
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Fix build break introduced in commit 6b013c4721c5
("net: nbuf: Add timeout to net_buf getters")
Change-Id: Iaa521c6a49ae740eaee5276936442ab8aa4c47ba
Signed-off-by: Michael Scott <michael.scott@linaro.org>
This commit changes the net_buf getter functions in nbuf.h
by adding a timeout parameter. These function prototypes
are changed to accept a timeout parameter.
net_nbuf_get_rx()
net_nbuf_get_tx()
net_nbuf_get_data()
net_nbuf_get_reserve_rx()
net_nbuf_get_reserve_tx()
net_nbuf_get_reserve_data()
net_nbuf_copy()
net_nbuf_copy_all()
net_nbuf_push()
net_nbuf_append()
net_nbuf_write()
net_nbuf_insert()
Following convinience functions have not been changed
net_nbuf_append_u8
net_nbuf_append_be16
net_nbuf_append_be32
net_nbuf_insert_u8
net_nbuf_insert_be16
net_nbuf_insert_be32
net_nbuf_write_u8
net_nbuf_write_be16
net_nbuf_write_be32
so they call the base function using K_FOREVER. Use the
base function if you want to have a timeout when net_buf
is allocated.
Change-Id: I20bb602ffb73069e5a02668fce60575141586c0f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit changes Kconfig prefix for ieee802154 drivers to
IEEE802154_*. This is done for consistency with config prefixes
used in other subsystems.
Change-Id: Ibbb4d96d2b748f4f13135bde85304ec34c5a90a6
Signed-off-by: Wojciech Bober <wojciech.bober@nordicsemi.no>
Set protocol family value only after the buf is verified
to be non-null.
Change-Id: I0ce7bab3539087d0f522b4bb3024f46a7eb3c15f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This patch adds a basic HTTP client sample application.
The following HTTP 1.1 methods are supported: GET, HEAD,
OPTIONS and POST.
This sample application does not define an API for HTTP,
for more information see ZEP-346.
Jira: ZEP-827
Change-Id: Iee63a53f2ef424964f040eba20326d648249fc24
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
The README was referring to a specific version of the boot loader.
Since the boot loader version is expected to change in future
and Zephyr code would also correspond to that version, it is better
to not mention any specific version. Instead, the requirement
is to use the latest version of the boot loader.
Change-Id: I04082eec4af16426f6456702c521e8f61bd4e0df
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Add missing README.rst files to the last two samples.
Jira: ZEP-1540
Change-Id: I8dfa6489c6c65872594d4416870e2a41e701595d
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Reduce the pressure on the common RX buffer pool by reusing HCI
command buffers also for the Command Status or Command Complete
response to them. This also implies removing the existing Kconfig
variable for the command buffer sizes since the size is also dependent
on maximum Command Complete event sizes. Instead, reuse the RX buffer
size also for HCI Command buffers.
Change-Id: I006b287d64a0c9ca40de741aa9a424a49a927385
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
A subsequent patch will start reusing HCI command buffers for
receiving the response, so the distinction of received vs sent data
headroom would just make the code unnecessarily complex. Instead, just
merge these two variable into a single one.
Change-Id: I31d846331939f1a2270df7ed0c75112825e16493
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Reduce the accelerometer sampling frequency for polling mode.
So, cpu has more time to fetch the sample.
Also add some waiting time for the new frequency setting to
take effect.
Jira: ZEP-1532
Change-Id: If5c1d8a2b5f30b232a212f2775306ca397b9f80c
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove CONFIG_GPIO from the prj config file. It is redundant.
Change-Id: Ife4301e7ce480a9002cadcddfd5eaa569900a391
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Use a static buffer for sending UDP payload instead of reading
values from memory.
Change-Id: I037db5cd9b8784966d481c36e8cbe92d19760475
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Compiler was giving "Unused variables" warnings if IPv6 was
enabled and IPv4 was not, and vice versa.
Change-Id: I3b17534bb8bdef207512ea5b618e138edb420871
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The IP address and port number were incorrectly parsed if
user used udp.upload command.
Change-Id: Ib37d481012af5e186a1e342c92d10ddef9fe35b1
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The IP address family was not set correctly when setting up
the connection. This lead to connectivity error in udp.upload
command.
Change-Id: I598ff2675f97e10e2033763a497f7583c94f3840
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add the HTTP server sample application on top of the
HTTP Parser Library.
This sample application is based on TCP and HTTP chunk
transfer code found at:
https://gerrit.zephyrproject.org/r/#/c/9977/
A README file with sample output and a detailed
description of this application is also provided.
Jira: ZEP-820
Jira: ZEP-1542
Jira: ZEP-1556
Change-Id: I649104a256190577000bbac118136d5bc21f83bf
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This enables these samples to interoperate with Linux 6LoWPAN over
Bluetooth implementation while that is being fixed, in the long term
we might remove it from the samples once Linux is fixed.
Jira: ZEP-1656
Change-Id: I8ca9fe5a27f43cebc75b6fe5a436a5e8fcee26d5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The DNS client sample application was updated to use IP addresses
from the prj_*.conf files. This patch updates the README file to
reflect those changes.
Change-Id: Ic72510be8da208aef19fb188560221e1c2386457
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Fix references to Qemu section and references to boards.
Change-Id: Ib2174ff698d57d3272073eecc71209e047961aaa
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Copy the documentation from the Wiki over here, the cross linking
between online documentation and Wiki and duplication of information was
inconsistent and confusing. Put everything in one place.
Change-Id: Ia3aaec1b431477e2ec54dbec2ccaa655870b0ee3
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
It doesn't really make sense for GET requests to have payloads, we
shouldn't even be checking if they have any payloads.
Change-Id: I4bb8cccd6c733a5825c2ca5067a990937c7045a6
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
- Reorganize some CONF variables and add the CONFIG_NET_SAMPLES_xxx
variables to the DNS sample application.
- Remove all the numeric IP addresses
- Use the CONFIG_NET_SAMPLES_xxx variables to define the IP addresses
Change-Id: Ib294d338f163f03ea1b47143b489d916578c532d
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
- Move the MAX_ADDRESSES macro to config.h.
Document the meaning and usage of this macro
- Delete unused defines
Change-Id: I035feb605611e564db15cba77d6a3dce8409ca18
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Add the FRDM_K64F board to the DNS sample app testcase.ini
Change-Id: Iea8f7d09ed0d793711a5807f4bb67ed35ebf52c1
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This commit adds the MQTT Publisher sample application for Zephyr.
The following MQTT API routines are exercised in this sample:
- mqtt_init
- mqtt_tx_connect
- mqtt_tx_pingreq
- mqtt_tx_publish
- mqtt_tx_disconnect
The following MQTT API data structures are used in this application:
- struct mqtt_ctx
- struct mqtt_connect_msg
- struct mqtt_publish_msg
This sample application exemplifies how to send MQTT PUBLISH messages
with different QoS values.
A README file is also included in this patch.
Change-Id: I2b41b276d5178a2cd1b07b031c38bff481885fff
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Enable zperf code to support TCP using the native IP stack
when testing the network throughput.
Change-Id: I3e58754cfff65525ad15e63adf57f1ea22e4559d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When CONFIG_NET_DHCPV4 is selected, ignore the CONFIG_NET_SAMPLES_MY_IPV4_ADDR
setting and instead used DHCPv4.
NOTE: This commit also adds a placeholder for DHCPv6 behavior which is not
yet functional.
Change-Id: Id31fcb99be46e966babf18f94b5dec151920dedc
Signed-off-by: Michael Scott <michael.scott@linaro.org>
When CONFIG_DNS_RESOLVER is active, the PEER config will be ignored and
instead a DNS query for DEFAULT_SERVER will be used.
Change-Id: If2c699944027f3c6a8ae9654f9cda0d7dca387c8
Signed-off-by: Michael Scott <michael.scott@linaro.org>
NOTE: You must set CONFIG_NET_IPV6=n in the project .conf file for
the CONFIG_NET_IPV4 setting to take effect.
Only 1 IP connection is active at a time. And when both are active
CONFIG_NET_IPV6 takes precedence.
Change-Id: I34a75f8d44db986810648d82a65d2ed29fc9a940
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Often IRC messages are split across multiple netbuf fragments.
Let's fix the message processing to account for this.
Change-Id: I3835af6adf337d27c28a0beeb72848dcc838772c
Signed-off-by: Michael Scott <michael.scott@linaro.org>
IRC won't allow 2 users to use the same user name, so let's add
a random number to the end of "zephyrbot" to make it semi-unique.
Change-Id: I56349de21823d8fd2c52646656615b42fc12de5e
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Currently, status can be 0 when a NULL buffer is sent to
on_context_recv() so let's not include status in our check.
And in the future, status parameter may be a non-zero value indicating
an error condition. So modify check to include positive values as well.
NOTE: Also make sure to use NET_ERR in these cases and not NET_INFO.
Change-Id: I8eac9a86d22b3b5624cd7a4e9d99e57afcac035f
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Instead let this be set via the project .conf file
Change-Id: Id8d7b46cc0888b83593b6f82dae619fb42c6ae3f
Signed-off-by: Michael Scott <michael.scott@linaro.org>
chan->irc won't be set after the "JOIN" transmit succeeds.
Change-Id: I935b0a44c94ec3d2c91b73db92bfd2005c27bb7f
Signed-off-by: Michael Scott <michael.scott@linaro.org>
samples/net/irc_bot/src/irc-bot.c:368:36:
warning: 'c' may be used uninitialized in this function
[-Wmaybe-uninitialized]
for (cc = &chan->irc->chans, c = c->irc->chans;
^
As suggested by Leandro Pereira <leandro.pereira@intel.com>
adjusted to:
for (cc = &chan->irc->chans, c = chan->irc->chans;
Change-Id: Icd490059e0b97f95408dd7bad3f1783a215c5edb
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Making a bit more room in these buffers. Some were not big enough
in certain cases, while others needed more room in general.
Change-Id: I47a4bb8c6635305f55dee323f7293b2e4cbed55a
Signed-off-by: Michael Scott <michael.scott@linaro.org>
K_FOREVER timeout in net_context_connect() will wait until
SYNACK has been received and we're ready to proceed with socket
communication.
To make the code as clear as possible, let's remove 2 callback
functions and relocate that code inside zirc_connect().
Change-Id: I6c64852ad5f48b24e1e6a58a741981e7d07bfd40
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Due to code restructuring we should move the following
functions higher in the code (above zirc_connect):
zirc_nick_set()
zirc_user_set()
zirc_chan_join()
Also relocate the function declaration for on_msg_rcvd()
to the top of the code.
Change-Id: I3936fb645b709dcbcfcc4212c127db819974c046
Signed-off-by: Michael Scott <michael.scott@linaro.org>
