This commit adds IPSO temperature support to the LwM2M client sample.
NOTE: A dummy value of 25C is set during initialization and does not
change.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
This sample utilizes the new LwM2M library by setting up default
values for LwM2M device and firmware objects and then establisting
a connection to a LwM2M server (for example Leshan Demo Server) via
the registration interface.
To use QEMU for this purpose please see:
doc/subsystems/networking/qemu_setup.rst
NOTE: This sample currently does not demonstrate DTLS/bootstrap as
neither of these is supported by the LwM2M library.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
When unicast IPv6 address is added to network interface, it is
possible that the return value is NULL (if all the address slots
are already occupied).
Coverity-CID: 157607
Jira: ZEP-2467
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This patch adds a configuration file that tests Flash writes with MPU
enabled.
[david.brown: Put options in prj.conf with comments as per review
feedback]
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Signed-off-by: David Brown <david.brown@linaro.org>
The parsing of strings with sharp notes (e.g. "100C#") was incorrectly
implemented. Now it should be correct. Additional benefit is that this
should fix Coverity CID 173632.
Jira: ZEP-2467
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The IEEE 802.15.4 settings are applied automatically by
net_app_init() function is is enabled by default.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Don't call net configuration explicitly, instead rely on net_app
auto init service.
Thus, the only difference between POSIX and Zephyr versions of these
samples are different include files. The application code is 100%
the same.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Make use of CONFIG_NET_APP_BLUETOOTH_NODE to enable advertising and
registering the necessary services.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The led demo does not even enable Bluetooth by default, and in case a
custom enables it shall use CONFIG_NET_APP_BLUETOOTH_NODE.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Make use of CONFIG_NET_APP_BLUETOOTH_NODE to enable advertising and
registering the necessary services.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The so called Router role don't require the IPSS, nor it should
advertise since it is not the peripheral in this case.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The so called Router role don't require the IPSS, nor it should
advertise since it is not the peripheral in this case.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Make use of CONFIG_NET_APP_BLUETOOTH_NODE to enable advertising and
registering the necessary services.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The so called Router role don't require the IPSS, nor it should
advertise since it is not the peripheral in this case.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The so called Router role don't require the IPSS, nor it should
advertise since it is not the peripheral in this case.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The so called Router role don't require the IPSS, nor it should
advertise since it is not the peripheral in this case.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Make use of CONFIG_NET_APP_BLUETOOTH_NODE to enable advertising and
registering the necessary services.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Make use of CONFIG_NET_APP_BLUETOOTH_NODE to enable advertising and
registering the necessary services.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Sample can be used to test ambient light, RGB and proximity
functionality of APDS9960 sensor in polling mode.
Remove old sample which is not using sensor API.
ZEP-1552
Signed-off-by: Punit Vara <punit.vara@intel.com>
ReST defines interpreted text roles where text enclosed by single quotes
can be "intrepreted", for example :ref:`some name` becomes a link to
a label anywhere in the doc set named "some name", :c:func:`funcname()`
becomes a link to the API documentation for "funcname", and
:option:`CONFIG_NAME` becomes a link to, in our case, the documentation
for the generated Kconfig option.
This patch fixes uses of `some name` (without a role) by either adding
an explicit role, or changing to ``some name``, which indicates inline
code block formatting (most likely what was intended).
This is a precursor to changing the default behavior of interpreted
text to treat `some name` as :any:`some name` (as configured in
doc/conf.py), which would attempt to create a link to any available
definition of "some name".
We may not change this default role behavior, but it becomes an option
after the fixes in this patch. In any case, this patch fixes incorrect
uses of single-quoted text (possibly introduced because GitHub's
markdown language uses single-quoted text for inline code formatting).
Jira: ZEP-2414
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Count of 4 seems to cause deadlocks with some Android phones due to
other GATT activity in addition to Mesh related data.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Convert echo-client to use DTLS for UDP connections if DTLS
is enabled by prj.conf file.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Convert echo-server to use DTLS for UDP connections if DTLS
is enabled by prj.conf file.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Duplicate CONFIG_SYS_LOG_NET_LEVEL variable was defined in
config files so removing extras.
.config:58:warning: override: reassigning to symbol SYS_LOG_NET_LEVEL
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Couple of network samples had extra startup thread which is not
needed currently. This was an artifact before moving to using
unified kernel.
Jira: ZEP-2236
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Run http_server, http_client and https_client compile tests with
Bluetooth config. For http client tests we only use qemu_x86 as
the qemu_cortex_m3 tests failed because of too little memory.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If CONFIG_NET_CONTEXT_NET_PKT_POOL is defined, which is the
default for Bluetooth, then create the pool and use it when
sending network packets. This is needed when trying to send
TCP packets using Bluetooth IPSP.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
