Add a sample to demonstrate and test the Wurth Elektronik WSEN-ITDS
accel sensor. Sample code covers accel and die temperature functions.
Signed-off-by: Saravanan Sekar <saravanan@linumiz.com>
The generic SPI GPIO chip select support now respects devicetree flags
for signal active level. Update all cs-gpios properties to specify
active low.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming multiple projects
"NONE" defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names, small, manual adjustments
have been done.
See also 7eabab2f5d ("samples, tests: Use semi-accurate project names")
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
This provides a better error message when building with CMake and
forgetting ZEPHYR_BASE or not registering Zephyr in the CMake package
registry. See parent commit for more details (split from parent for
better readability).
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Several reviewers agreed that DT_HAS_NODE_STATUS_OKAY(...) was an
undesirable API for the following reasons:
- it's inconsistent with the rest of the DT_NODE_HAS_FOO names
- DT_NODE_HAS_FOO_BAR_BAZ(node) was agreed upon as a shorthand
for macros which are equivalent to
DT_NODE_HAS_FOO(node) && DT_NODE_HAS_BAR(node) &&
- DT_NODE_HAS_BAZ(node), and DT_HAS_NODE_STATUS_OKAY is an odd duck
- DT_NODE_HAS_STATUS(..., okay) was viewed as more readable anyway
- it is seen as a somewhat aesthetically challenged name
Replace all users with DT_NODE_HAS_STATUS(..., okay), which is
semantically equivalent.
This is mostly done with sed, but a few remaining cases were done by
hand, along with whitespace, docs, and comment changes. These special
cases include the Nordic SOC static assert files.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Rename DT_HAS_NODE to DT_HAS_NODE_STATUS_OKAY so the semantics are
clear. As going forward DT_HAS_NODE will report if a NODE exists
regardless of its status.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The NRF driver doesn't utilize the Kconfig symbol for per instance I2C
so we can remove setting that in the conf file.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The sensor is on the nrf9160_innblue22 not nrf9160_innblue21. This
causes CI build failures since there is no dts node for the sensor
on the nrf9160_innblue21 board.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert driver to use DT_INST_ defines. As part of this conversion we
remove the Kconfig options for per GPIO controller enables and instead
get that information from device tree. This means we now disable each
GPIO controller by default in the DTS and have each board dts enable the
GPIO controller ports it needs.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
board support nrf9160_innblue22 includes the sensor in
nrf9160_innblue22_common.dts, explicit overlay can be removed
Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
I personally don't find it very useful to have to maintain prj.conf
and prj_spi.conf for this sample. The information we need to make
this application "just work" with regards to the bus is available in
the devicetree, and Kconfig can now access it using
dt_compat_on_bus().
Do so, enabling I2C and SPI appropriately when a sensor of the right
type is on either of those buses.
If no sensors are enabled, the user gets the build-time error message
in main.c about no devices being found.
This approach is prone to the "stuck symbol" Kconfig problem covered
in our documentation, so a pristine build is necessary to change the
default settings from a previous build.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Use instance zero of the compatible to get the device instead of
fixing a label. Print the used label for help debugging, and the
results of finding the device (or not), with a hint about what might
have gone wrong in case of failure.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The nrf52840-DK doesn't have this sensor built-in, so it's likely
users will be getting this sensor from a breakout board. The ones that
Sparkfun and Adafruit sell pull up the LSB address pin, so the default
address is 0x77 on those boards.
Let's follow along with them instead of using 0x76, because those are
the boards that come up first in the results when you google "BME280
breakout board" from where I'm sitting.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This helps debug issues with the device. Samples should try to be
helpful to first-time users. Send printk() to logging so it doesn't
fight over the UART.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add bq274xx sample with reading and showing all
possible values from the sensor.
Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
Signed-off-by: NavinSankar Velliangiri <navin@linumiz.com>
The lpcxpresso55s69 board has an mma8652 accelerometer which is
compatible with the fxos8700 driver in accel-only mode. Now that this
board has an i2c driver, include it in the platform whitelist.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The samples/sensor/sensor_shell sample was introduced after deprecation
of set_conf_file and thus was not adopted to the new recommended board
conf file overlay.
This commit align this sample with the rest of Zephyr's samples.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The board name for the Thingy:52, so far known as nrf52_pca20020, is
renamed to thingy52_nrf52832. Its documentation and all references to
its name in the tree are updated accordingly. Overlay and configuration
files specific to this board are also renamed, to match the new board
name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The board name for the nRF52 DK, so far known as nrf52_pca10040, is
renamed to nrf52dk_nrf52832. Its documentation and all references
to its name in the tree are updated accordingly. Overlay and
configuration files specific to this board are also renamed, to
match the new board name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The fxos8700 sample application configures the sensor driver to sample
data at 6.25 Hz. Most configurations use the sensor data ready interrupt
to throttle the loop, but it's possible to configure the sample not to
use the data ready interrupt. In this case, throttle the loop with a
delay so it doesn't outpace the sensor data.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The frdm-kl25z, bbc_microbit, and reel_board have an mma8xxx
accelerometer and therefore must use the fxos8700 driver in
accelerometer-only mode instead of hybrid mode. Refactor these boards
into a separate test that uses the prj_accel.conf configuration as
described in README.rst.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Kernel timeouts have always been a 32 bit integer despite the
existence of generation macros, and existing code has been
inconsistent about using them. Upcoming commits are going to make the
timeout arguments opaque, so fix things up to be rigorously correct.
Changes include:
+ Adding a K_TIMEOUT_EQ() macro for code that needs to compare timeout
values for equality (e.g. with K_FOREVER or K_NO_WAIT).
+ Adding a k_msleep() synonym for k_sleep() which can continue to take
integral arguments as k_sleep() moves away to timeout arguments.
+ Pervasively using the K_MSEC(), K_SECONDS(), et. al. macros to
generate timeout arguments.
+ Removing the usage of K_NO_WAIT as the final argument to
K_THREAD_DEFINE(). This is just a count of milliseconds and we need
to use a zero.
This patch include no logic changes and should not affect generated
code at all.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The nRF52840 DK board target, so far known as nrf52840_pca10056,
is renamed to nrf52840dk_nrf52840.
Its documentation and all references to its name in the tree are
updated accordingly. Overlay and configuration files specific to
this board are also renamed, to match the new board name.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
gpio_pin_get() returns a negative value in case of error and
callbacks_configure was assigning this value to an unsigned variable.
Fixes: #22643
Coverity CID :208206
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
And an overlay for the nRF52840 DK to be able to build the sample after
the transition to Device Tree.
Fixes#23148.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Replace Kconfig configuration data with devicetree bindings using
(ADC) io channels. Rework the sample to document expectations about
the relationship between the reference voltage and the divider input
voltage, and update the sensor configuration to support Nordic SAADC.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Replace Kconfig configuration data with devicetree bindings using
(ADC) io channels. Rework the sample to document expectations about
the relationship between the reference voltage and the divider input
voltage, and update the sensor configuration to support Nordic SAADC.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Use new configuration API, replace callback enable/disable with
interrupt enable/disable, and set active level in devicetree source.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
