Commit graph

19 commits

Author SHA1 Message Date
Maureen Helm
c603aa8928 drivers: serial: Fix uart_irq_tx_complete() in remaining mcux drivers
Extends the fix in commit 2175675199 to
all other mcux serial drivers. They were incorrectly checking if the
transmit buffer was empty when they should have been checking if the
transmission is complete.

Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2020-06-12 09:49:42 +02:00
Kumar Gala
a1b77fd589 zephyr: replace zephyr integer types with C99 types
git grep -l 'u\(8\|16\|32\|64\)_t' | \
		xargs sed -i "s/u\(8\|16\|32\|64\)_t/uint\1_t/g"
	git grep -l 's\(8\|16\|32\|64\)_t' | \
		xargs sed -i "s/s\(8\|16\|32\|64\)_t/int\1_t/g"

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2020-06-08 08:23:57 -05:00
Martí Bolívar
7e0eed9235 devicetree: allow access to all nodes
Usually, we want to operate only on "available" device
nodes ("available" means "status is okay and a matching binding is
found"), but that's not true in all cases.

Sometimes we want to operate on special nodes without matching
bindings, such as those describing memory.

To handle the distinction, change various additional devicetree APIs
making it clear that they operate only on available device nodes,
adjusting gen_defines and devicetree.h implementation details
accordingly:

- emit macros for all existing nodes in gen_defines.py, regardless
  of status or matching binding
- rename DT_NUM_INST to DT_NUM_INST_STATUS_OKAY
- rename DT_NODE_HAS_COMPAT to DT_NODE_HAS_COMPAT_STATUS_OKAY
- rename DT_INST_FOREACH to DT_INST_FOREACH_STATUS_OKAY
- rename DT_ANY_INST_ON_BUS to DT_ANY_INST_ON_BUS_STATUS_OKAY
- rewrite DT_HAS_NODE_STATUS_OKAY in terms of a new DT_NODE_HAS_STATUS
- resurrect DT_HAS_NODE in the form of DT_NODE_EXISTS
- remove DT_COMPAT_ON_BUS as a public API
- use the new default_prop_types edtlib parameter

Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
2020-05-08 19:37:18 -05:00
Tomasz Bursztyka
97326c0445 device: Fix structure attributes access
Since struct devconfig was merged earlier into struct device, let's fix
accessing config_info, name, ... attributes everywhere via:

grep -rlZ 'dev->config->' | xargs -0 sed -i 's/dev->config->/dev->/g'

Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2020-05-08 23:07:44 +02:00
Kumar Gala
0a7d4e2135 devicetree: Change DT_FOREACH_IMPL_ to not insert semicolon
Remove semicolon between instance invocations of DT_FOREACH_IMPL_ and
thus DT_INST_FOREACH.  This provides more flexibility to the user.  This
requires we fixup in tree users to add semicolon where needed.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2020-05-07 20:03:56 -05:00
Kumar Gala
fd021da59a drivers: uart: mcux_lpsci: Convert to DT_INST
Convert driver to use new DT_INST macros throughout.  Removed per
instance Kconfig symbols and replaced with DT_NODELABEL references
where needed.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2020-04-28 16:54:30 -05:00
Maureen Helm
93b457f4da drivers: serial: Refactor mcux lpsci driver to use generated dts macros
Refactors the mcux lpsci driver to use generated device tree macros
directly. Removes now unused dts fixup macros from i.mx rt and kinetis
socs.

Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2020-01-15 18:02:19 -05:00
Anas Nashif
d1b2718687 cleanup: include/: move uart.h to drivers/uart.h
move uart.h to drivers/uart.h and
create a shim for backward-compatibility.

No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.

Related to #16539

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2019-06-27 22:55:49 -04:00
Anas Nashif
17ddd1714c cleanup: include/: move clock_control.h to drivers/clock_control.h
move clock_control.h to drivers/clock_control.h and
create a shim for backward-compatibility.

No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.

Related to #16539

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2019-06-27 22:55:49 -04:00
Anas Nashif
4c32258606 style: add braces around if/while statements
Per guidelines, all statements should have braces around them. We do not
have a CI check for this, so a few went in unnoticed.

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2019-06-06 15:20:21 +02:00
Patrik Flykt
24d71431e9 all: Add 'U' suffix when using unsigned variables
Add a 'U' suffix to values when computing and comparing against
unsigned variables.

Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
2019-03-28 17:15:58 -05:00
Patrik Flykt
8ff96b5a57 drivers: Add 'U' to unsigned variable assignments
Add 'U' to a value when assigning it to an unsigned variable.
MISRA-C rule 7.2

Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
2018-12-04 22:51:56 -05:00
Flavio Ceolin
98d03266f1 serial: Change poll_out signature
poll_out function was returning the character that was sent. It
happens that it is always constant and the return of this functions is
never tested. Changing it to be a void function.

MISRA-C rule 17.7

Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
2018-11-29 10:18:59 -08:00
Andrzej Głąbek
20202902f2 dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig
These changes were obtained by running a script  created by
Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following
specification:

1. Read the contents of all dts_fixup.h files in Zephyr
2. Check the left-hand side of the #define macros (i.e. the X in
   #define X Y)
3. Check if that name is also the name of a Kconfig option
   3.a If it is, then do nothing
   3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it
       has neither of these two prefixes
4. Replace the use of the changed #define in the code itself
   (.c, .h, .ld)

Additionally, some tweaks had to be added to this script to catch some
of the macros used in the code in a parameterized form, e.g.:
- CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS
- CONFIG_UART_##idx##_TX_PIN
- I2C_SBCON_##_num##_BASE_ADDR
and to prevent adding DT_ prefix to the following symbols:
- FLASH_START
- FLASH_SIZE
- SRAM_START
- SRAM_SIZE
- _ROM_ADDR
- _ROM_SIZE
- _RAM_ADDR
- _RAM_SIZE
which are surprisingly also defined in some dts_fixup.h files.

Finally, some manual corrections had to be done as well:
- name##_IRQ -> DT_##name##_IRQ in uart_stm32.c

Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 10:44:42 -06:00
Andrzej Głąbek
8dd11d9736 drivers: serial: Update DTS-derived labels with DT_ prefix
Update a couple of labels generated from DTS used directly (not through
dts_fixups) in some serial drivers, to the reflect recent changes made
to the extracting script.

Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 10:44:42 -06:00
Paul Sokolovsky
57286afdd6 drivers: uart: Allow to pass arbitrary user data to irq callback
Zephyr UART drivers offer very low-level functionality. Oftentimes,
it would be useful to provide higher-level wrappers around UART
device which would offer additional functionality. However, UART
driver irq callback routine receives just a pointer to (low-level)
UART device, and it's not possible to get to a wrapper structure
(without introducing expensive external mapping structures). This
is an indirect reason why the current UARt wrappers - uart_pipe,
console - are instantiated statically just for one underlying UART
device and cannot be reused for multiple devices.

Solve this by allowing to pass an arbitrary user data to irq
callback, set by new uart_irq_callback_user_data_set() function.
Existing uart_irq_callback_set() keeps setting a callback which
will receive pointer to the device.

While public API maintains compatibility, drivers themselves need
to be updated to support arbitrary user data storage/passing (as
legacy uart_irq_callback_set() functionality is now implemented in
terms of it).

Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
2018-08-02 19:20:12 +02:00
Maureen Helm
e0954d3118 serial: Refactor mcux lpsci shim driver to use clock control interface
Refactors the mcux lpsci shim driver to use the clock control interface
instead of calling CLOCK_GetFreq() directly. This will allow SoCs with
different clock architectures to reuse this driver.

Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2017-10-20 12:28:11 -05:00
Paul Sokolovsky
0fdc9b5b12 drivers: serial: Clarify usage of TX/RX IRQ predicates.
uart_irq_tx_empty() function proved to be problematic: its semantics
was not documented properly, and many hardware uses terminology like
"TX register empty" to signify condition of TX register being ready
to accept another character (what in Zephyr is tested with
uart_irq_tx_ready()). To avoid confusion, uart_irq_tx_empty() was
renamed to uart_irq_tx_complete(), propagating to drivers/serial
device methods.

The semantics and usage model of all of uart_irq_rx_ready(),
uart_irq_tx_ready(), uart_irq_tx_complete() is now described in
detail.

Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
2017-05-13 10:57:31 -04:00
Kumar Gala
ed467a695a serial: mcux: Shim driver for LPSCI UART on KL25Z
Adds a shim layer around the mcux lpsci driver to adapt it to the Zephyr
serial interface.

Change-Id: I024f1605e3194f34bb57e8a121900e05b3085a82
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2017-04-28 15:26:38 -05:00