Fix the board redirects. The following boards existed before we moved to
a new style of URL for boards, and thus each have 2 entries (old style
old name to old style new name; new style old name to new style
new name):
- nrf51_pca10028
- nrf52810_pca10040
- nrf52840_pca10056
- nrf52840_pca10059
- nrf52_pca10040
- nrf52_pca20020
The following boards did not exist (or were not referenced) before we
moved to the new style of URL for boards, and thus only have one entry
(new style old name to new style new name):
- nrf51_pca10031
- nrf52811_pca10056
- nrf52833_pca10100
- nrf52840_pca10090
- nrf5340_dk_nrf5340
- nrf9160_pca10090
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
We are renaming the nrf5340 DK documentation page, and due to
re-organizing the doc directory we need to allow redirecting
the old URLs for nrf5340 DK board targets' documentation.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The board name for the Thingy:52, so far known as nrf52_pca20020, is
renamed to thingy52_nrf52832. Its documentation and all references to
its name in the tree are updated accordingly. Overlay and configuration
files specific to this board are also renamed, to match the new board
name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The board name for the nRF52840 Dongle, so far known as
nrf52840_pca10059, is renamed to nrf52840dongle_nrf52840. Its
documentation and all references to its name in the tree are updated
accordingly. Overlay and configuration files specific to this board are
also renamed, to match the new board name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The board target for emulation of nRF52810 on nRF5DK, so far
known as nrf52810_pca10040, is renamed to nrf52dk_nrf52810.
Its documentation and all references to its name in the tree are
updated accordingly. Overlay and configuration files specific to
this board are also renamed, to match the new board name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The board name for the nRF52 DK, so far known as nrf52_pca10040, is
renamed to nrf52dk_nrf52832. Its documentation and all references
to its name in the tree are updated accordingly. Overlay and
configuration files specific to this board are also renamed, to
match the new board name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
We are renaming the nrf9160 DK documentation page, and due to
re-organizing the doc directory we need to allow redirecting
the old URLs for nrf916 DK board targets' documentation.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The nRF52840 DK board target, so far known as nrf52840_pca10056,
is renamed to nrf52840dk_nrf52840.
Its documentation and all references to its name in the tree are
updated accordingly. Overlay and configuration files specific to
this board are also renamed, to match the new board name.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
We rename the nRF51 Dev Kit board target (nrf51_pca10028)
to nrf51dk_nrf51422. We update all associated references
in the supportive documentation and all nRF51-related
cofigurations and overlay files in the samples and tests
in the tree.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add 2.2.0 to the version pick list. Also remove old versions so that
the oldest one is the LTS release.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The SoC, driver, and board support for the CC2650 and CC2650 Sensortag
aren't currently supported and we are removing them as such. If anyone
is interesting in supporting this platform we can easily recovery it
from git.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
All docs are treated equally in the search results. The built-in search
system knows to emphasize hits in titles and object names, but could use
some help understating hits in non-definitive docs. In particular, hits
to docs in the /boards, /samples, and /reference/kconfig docs are often
not as important as hits in other docs, so let's push them later in the
search result output.
We can tweak the search results scoring (and thereby the order of
display) via the ``html_search_scorer`` setting in ``conf.py`` along
with a piece of JavaScript to adjust the result score.
Fixes: #16935
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
There is no code to handle __syscall_inline so it is better removing
it from doxygen and checkpatch.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
As presented to the TSC, Zephyr's out-of-box experience for new
developers is, well, complicated. A number of suggestions were
presented including simplifying the getting started material to present
a straight-forward path through the setup and installation steps through
to getting a sample application built, flashed, and running.
This PR is a work-in-progress towards addressing this OOB experience
with a minimal-distractions version of the GSG. Alternatives, warnings,
and material that could lead the developer astray were moved to
alternative/advanced instruction documents (based on the previous
separate Linux/macOS/Windows setup guides) and a new "Beyond the GSG"
document.
We do take advantage of a sphinx-tabs extension for synchronized tabs to
present OS-specific instructions: clicking on one tab will display all
same-named tabs throughout the doc.
We hope (and will continue evaluating) that this new GSG gets developers
set up quickly and then we can send them along to other documents to
continue learning about Zephyr and trying other sample apps.
Thanks for all your previous feedback that I've worked
into this new version.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The mimxrt10{20,60,64}_evk board docs were renamed from <board>.rst to
index.rst in commit 0e4ff809d7 but were
missing entries in the html redirect list. Add them.
An entry for mimxrt1015_evk is not added because this board always had
an index.rst board doc.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The board area was renamed from riscv32 to riscv back in July to
accommodate riscv64 support. Fix the remaining references in
documentation.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Update conf.py to add the v1.14.1 release docs to the master docs
version pick list, and remove the original v1.14.0.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
dtlib.py and guiconfig.py do some hackery to build token and image
variable names, which triggers spurious pylint warnings like
scripts/dts/dtlib.py:243:28: E0602: Undefined variable '_T_LABEL'
(undefined-variable)
Suppress the warning for those files. The generated names get used in
lots of places.
Also suppress some warnings in doc/conf.py ('tags' is from Sphinx), and
fix a legitimate issue in scripts/dts/testdtlib.py.
This pylint check is useful enough to want enabled in the upcoming CI
check.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
A bare 'except:' can do some annoying stuff like eat Ctrl-C (because it
catches KeyboardInterrupt). Better to use 'except Exception:' as a
catch-all.
Even better might be to catch some more specific exception, because even
'except Exception:' eats stuff like misspelled identifiers.
Fixes this pylint warning:
doc/conf.py:99:0: W0702: No exception type(s) specified
(bare-except)
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Reported by pylint's 'bad-whitespace' warning.
Not gonna enable this warning in the CI check, because it flags stuff
like deliberately aligning assignments and gets too cultish. Just a
cleanup pass.
For whatever reason, the common convention in Python is to skip spaces
around '=' when passing keyword arguments and giving default arguments:
f(x=3, y=4)
def f(x, y=8):
...
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The Next/Previous chapter buttons have been confusing in the past and
recent DX studies still show that folks read these as the "Next"
document to read in some defined order. These buttons are simply
another way to navigate through the document tree to the "Next" doc in
the table of contents. Let's remove these buttons (again).
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The main change is the elimination of the bootstrapper, a design flaw
/ misfeature.
Update the documentation to be compatible with the 0.6.x releases as
well. This has to be done atomically, as there were incompatible
changes. Make use of the versionchanged and versionadded directives
to begin keeping track of how these APIs are evolving.
(Note that west 0.6.0 will remain compatible with the extension
commands in Zephyr v1.14 LTS as long as that is still alive. This
change is targeted towards Zephyr 2.0 users.)
This requires a bump in the shippable container and allows us to
simplify the west_commands test procedure.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
With the upcoming riscv64 support, it is best to use "riscv" as the
subdirectory name and common symbols as riscv32 and riscv64 support
code is almost identical. Then later decide whether 32-bit or 64-bit
compilation is wanted.
Redirects for the web documentation are also included.
Then zephyrbot complained about this:
"
New files added that are not covered in CODEOWNERS:
dts/riscv/microsemi-miv.dtsi
dts/riscv/riscv32-fe310.dtsi
Please add one or more entries in the CODEOWNERS file to cover
those files
"
So I assigned them to those who created them. Feel free to readjust
as necessary.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This board and SoC was discontinued some time ago and is currently not
maintained in the zephyr tree.
Remove all associated configurations and variants from the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This board and SoC was discontinued some time ago and is currently not
maintained in the zephyr tree.
Remove all associated configurations and variants from the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We have directives in conf.py to create redirect links for docs that
have been moved around because of content reorganization. Reduce the
number of messages written out while debugging was going on and add some
comments to conf.py to explain how the directive works.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This adds code to each page needed for gathering google analytics
tracking data to the LF-provided Global site tag.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Fixes pylint warnings like this one:
doc/conf.py:325:0: W1401: Anomalous backslash in string: '\s'.
String constant might be missing an r prefix.
(anomalous-backslash-in-string)
The reason for this warning is that backslash escapes are interpreted in
non-raw (non-r-prefixed) strings. For example, '\a' and r'\a' are not
the same string (first one has a single ASCII bell character, second one
has two characters).
It just happens that there's no \s (or \., or \/) escape for example,
and '\s' turns into two characters (as needed for a regex). It's risky
to rely on stuff like that regexes though. Best to make them raw strings
unless they're super trivial.
Also note that '\s' and '\\s' turn into the same string.
Another tip: A literal ' can be put into a string with "blah'blah"
instead of 'blah\'blah'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Linking to API material requires knowing the pecularities of how
doxygen, sphinx, and breathe work. In an attempt to hide some of this
we're preparing the current docs to allow use of configuration defaults
that will let us more simply use a default role that will hunt for a
reference target in the various domains that are available by using a
default "role" of "all". This will let us use the simple notation
`functionname` or `typename` without fully specifying the reference as
:c:func:`functionname`.
This patch cleans up exising docs that were (incorrectly) using single
backtics where double backtics should have been used, and also found
some typos (such as a space between the role name and the reference,
such as :file: `filename`, and a missing colon such as
c:func:`functionname`)
This is a start to address issue #14313
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
West now supports a mechanism for extension commands. Use it to move
the command implementations that are tightly coupled with boards and
the zephyr build system back into the Zephyr repository.
This patch doesn't include test cases. Those will be moved over in a
subsequent patch.
Signed-off-by: Marti Bolivar <marti@foundries.io>
Since west is no longer part of the Zephyr tree, we can no longer
hardcode its path anymore. Instead, use west itself to retrieve its
path, in order to point the documentation build to the correct
active west installation.
This is optional, and the documentation build will still work if west is
not installed on the system.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
When referencing files from the git tree create a link to the file for
easy browsing of header files and other files of interest.
Borrowed from esspresif/esp-idf project and modified for Zephyr.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The Sphinx ``.. only::`` directive is limited to handling only
conditional text and can't handling conditional use of directives
For example,
```
.. only:: test
.. automodule:: west.runners.core
:members:
```
is not handled. This PR monkey patches the handling of the existing
``.. only::`` directive done by Sphinx.
See https://github.com/pfalcon/sphinx_selective_exclude for details.
Licensing amended to Apache 2.0 with permission from the author.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The documentation has been setting the environment variable
KERNELVERSION to the PROJECT_VERSION of the documentation. But
PROJECT_VERSION is not set during the documentation build so this has
no effect.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
