Adds standard prefix to symbolic option that flags a thread
as essential to system operation.
Change-Id: Ia904a81ce343fdd1cd44caaaeae641d822777f9b
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
QMSI 1.3 natively supports restoring the SoC and peripherals
after sleep.
The Zephyr Power Management shim layer is updated
in order to support QMSI functions.
The following functions have been added:
void _sys_soc_set_power_state(enum power_state);
void _sys_soc_power_state_post_ops(void);
In order to fully support deep sleep, the function
_sys_soc_set_power_state now support saving and
restoring CPU context and returns to the application.
_sys_soc_set_power_state function also abstracts
QMSI cpu states and enable the application to choose
between C1/C2 or C2LP states.
The QMSI power states are mapped as follows:
SYS_SOC_POWER_STATE_CPU_LPS -> power_cpu_c2lp
SYS_SOC_POWER_STATE_CPU_LPS_1 -> power_cpu_c2
SYS_SOC_POWER_STATE_CPU_LPS_2 -> power_cpu_c1
SYS_SOC_POWER_STATE_DEEP_SLEEP -> power_soc_deep_sleep
SYS_SOC_POWER_STATE_DEEP_SLEEP_1 -> power_soc_sleep
The following functions have been removed:
void _sys_soc_set_power_policy(uint32_t pm_policy);
int _sys_soc_get_power_policy(void);
FUNC_NORETURN void _sys_soc_put_deep_sleep(void);
void _sys_soc_put_low_power_state(void);
void _sys_soc_deep_sleep_post_ops(void);
Those changes are propagated to the samples.
All calls to QMSI are removed.
Jira: ZEP-1045, ZEP-993, ZEP-1047
Change-Id: I26822727985b63be0a310cc3590a3e71b8e72c8c
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
A new shared memory has been added to the qmsi bootloader
in order to handle the restore flow and jump to
the restore trap where context is restored.
Add the new entry to the QUARK SE C1000 linker file
and new kconfig options:
- CONFIG_BSP_SHARED_RAM_ADDR to set the address of the
shared memory.
- CONFIG_BSP_SHARED_RAM_SIZE to set the size of the
shared memory.
This is only enabled with CONFIG_SYS_POWER_DEEP_SLEEP.
Jira: ZEP-1046
Change-Id: I35d924a100c5583025aa36a9741428ab51809c57
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
IRQ numbers differ between x86 and ARC, as well as the bits that need to
be touched in the interrupt routing masks. QMSI abstracts some of it and
for the rest we do have the information needed.
Add a macro to select the right IRQ number based on which core we are
building for.
Change-Id: I3e6680d10a0a23c98777d2831efe6819fcb54162
Signed-off-by: Iván Briano <ivan.briano@intel.com>
There are a number of data sections that are repeated across
all the linker scripts for various architecture. In practice these
don't always get updated and we have had problems with bit-rot.
Consolidate these to make maintenance easier.
x86 linker scripts now follow the same naming convention and we
get rid of a linker-epilog.h that wasn't necessary and whose purpose
has been lost to the mists of time. If applications want to define their
own sections they should be allowed to. Linker scripts for x86 do not
end with .h any more, they are not C header files even though we use
C's preprocessor.
Issue: ZEP-688
Change-Id: I893eb4619969695c1f980efd7c2ec9fa5dad136d
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Update the QMSI drop we maintain in Zephyr, and fix the build where
needed:
- QM_SCSS_INT is renamed to QM_INTERRUPT_ROUTER;
- every member of QM_INTERRUPT_ROUTER was renamed as well;
- QM_IRQ_* renamed too, mostly added _INT at the end;
- some isr functions were renamed to keep their names consistent;
- build for x86 needs to define QM_LAKEMONT, as QM_SENSOR was for ARC.
Change-Id: I459029ca0d373f6c831e2bb8ebd52402a55994d1
Signed-off-by: Iván Briano <ivan.briano@intel.com>
They were the same, standardize on the lowercase one.
Change-Id: I8bca080e45f3e0970697d4451e468b9081f96f5f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Gets rid of unnecessary THREAD_MONITOR_INIT() macro, to be
consistent with the approach taken by _thread_monitor_exit().
Aligns x86 code with the approach used on other architectures.
Revises the associated comments and removes unnecessary
doxygen tags.
Change-Id: Ied1aebcd476afb82f61862b77264efb8a7dc66c9
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
There is a convention in the soc implementation for other
(non-ethernet) classes of driver that enabling a generic driver has the
effect of enabling the specific flavour of driver required for the
board. Extend this convention such that when ETHERNET is enabled, the
quark_x1000 enables the DW ethernet driver.
Change-Id: I525471d259c9582024cd44d6cc4557260abe6451
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When adding a thread to the ready queue, it is often known at that time
if the thread added will be the next one to run or not. So, instead of
simply updating the ready queues and the bitmask, also cache what that
thread is, so that when the scheduler is invoked, it can simply fetch it
from there. This is only done if there is a thread in the cache, since
the way the cache is updated is by comparing the priorities of the
thread being added and the cached thread.
When a thread is removed from the ready queue, if it is currently the
cached thread, it is also removed from the cache. The cache is not
updated at this time, since this would be a preemptive fetching that
could be overriden before the newly cached thread would even be
scheduled in.
Finally, when a thread is scheduled in, it now becomes the cached thread
since the fact that it is running means that by definition it was the
next one to run.
Doing this can speed up considerably some context switch times,
especially when a thread is preempted by an interrupt and the same
thread is scheduled when the interrupt exits.
Change-Id: I6dc8391cfca566699bb9b217eafe6bc6a063c8bb
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Using AON for GPIO kconfigs is very specifc to quark se, there
is no need to make this special for this platform. Use the
existing scheme instead.
Change-Id: I946431490380dc0f537d6056277a94c9c9c80fed
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Simplified some documentation, removing inconsistencies and making
it easier to understand by separating PM infrastructure areas and
soc specific components that implement the hooks.
Removed the DEVICE_SUSPEND_ONLY policy as it is redundant and
causes high complexity in the flow. It is also not practical
to use it because it was meant to be used without doing CPU or SOC
low power state operations. This means it would do device PM
operations in the ISR of the system timer used by the scheduler.
This can disrupt the scheduler time.
Added a check of a flag around the notification sent from the ISR
of the wake event and created APIs to set/clear it. This will
allow disabling the notification when not needed from
_sys_soc_suspend().
Jira: ZEP-972
Change-Id: Id7aa7d2683384eabed518d4efac446ecc84c3498
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Exception stubs now just push the handler and in some cases a dummy
error code before jumping to the exception handling code, never to
return.
Change-Id: I6a79d9243deb3fc7ccdae003dd0917364c0aa304
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Interrupt stubs now just push the ISR and parameter onto the stack
and jump to the common interrupt code, never to return.
Change-Id: I82543d8148b5c7dfe116c43f41791f852614bb28
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Re-enabling interrupts before running the ISR must only be done
when CONFIG_NESTED_INTERRUPTS is turned on.
Change-Id: I2c04f2ce08d41cfef5553ee8554a90d1be0e86a3
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The CPU manual indicates that 8-byte alignment is sufficient,
not sure why gdt_rom was aligned on a 16-byte boundary.
The null descriptor in the GDT is never looked at by the CPU,
save a few bytes by putting the 6-byte pseudo descriptor there.
Change-Id: I73f26cdeb30a91f8258c88ef960a45812a11d959
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This header has a bunch of data structure definitions and macros useful
for manipulating segment descriptors on X86. The old IDT_ENTRY defintion
is removed in favor of the new 'struct segment_descriptor' which can be
used for all segment descriptor types and not just IRQ gates.
We also add some inline helper functions for examining segment registers,
descriptor tables, and doing far jumps/calls.
Change-Id: I640879073afa9765d2a214c3fb3c3305fef94b5e
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The '_timeout' structure is needed by dummy threads so that they can
handle timeouts.
Change-Id: Iefabd6ad93c8e176e95ce4262f5f3544dc90b7d5
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Do not force selection of X86_IAMCU
Jira: ZEP-867
Change-Id: I2ca0bcd73502321e9e6f5a4638c309393da54e43
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Unified kernel does not provide the _thread_arg_t type, but instead uses
void * directly for its thread entry parameters. _thread_entry_t is
typedefed from void * anyway, and only obfuscates the type. So, define
_thread_entry_t to be a function pointer to a function with three void *
parameters, and when the unified kernel becomes the only kernel, all the
_thread_arg_t types will go away.
With this change, IAMCU runs all the tests sysV x86 is able to run as a
unified kernel.
Change-Id: I53c8754629a5a0a114a16a775ff1efc1884496ff
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The x86 architecture port is fitted with support for the unified kernel,
namely:
- the interrupt exit code now calls _Swap() if the current
thread is not a coop thread and if the scheduler is not locked
- there is no 'task' fields in the _nanokernel anymore: _Swap()
now calls _get_next_ready_thread instead
- the _nanokernel.fiber field is replaced by a more sophisticated
ready_q, based on the microkernel's priority-bitmap-based one
- nano_private includes nano_internal.h from the unified directory
- the FIBER, TASK and PREEMPTIBLE flags do not exist anymore: the thread
priority drives the behaviour
- the tcs uses a dlist for queuing in both ready and wait queues instead
of a custom singly-linked list
- other new fields in the tcs include a schedule-lock count, a
back-pointer to init data (when the task is static) and a pointer to
swap data, needed when a thread pending on _Swap() must be passed more
then just one value (e.g. k_stack_pop() needs an error code and data)
- fiberRtnValueSet() is aliased to _set_thread_return_value since it
also operates on preempt threads now
- _set_thread_return_value_with_data() sets the swap_data field in
addition to a return value from _Swap()
- convenience aliases are created for shorter names:
- _current is defined as _nanokernel.current
- _ready_q is defined as _nanokernel.ready_q
- _Swap() sets the threads's return code to -EAGAIN before swapping out
to prevent timeouts to have to set it (solves hard issues in some
kernel objects).
- Floating point support.
Note that, in _Swap(), the register holding the thread to be swapped in has
been changed from %ecx to %eax in both the legacy kernel and the unified kernel
to take advantage of the fact that the return value of _get_next_ready_thread()
is stored in %eax, and this avoids moving it to %ecx.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: I4ce2bd47bcdc62034c669b5e889fc0f29480c43b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Loading the _nanokernel address in %edi rather than in %eax allows
calling funtions in _Swap() without having to restore it, since %eax is
used for the return value. %edi is a callee-saved register and does not
have to be restored.
Change-Id: I338086d8e15857e835d5d7487de975791926f869
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Quark D2000 and SE based boards (but Arduino 101) use QMSI bootloader
by default. QMSI bootloader sets up GDT in the so-called 'basic flat
model' just like Zephyr does by default.
This patch changes Quark D2000 and SE boards default configuration
so they rely on QMSI bootloader and we don't sets up GDT twice.
Change-Id: Ic6e520148b732bd48c00657c6c8138a8d865faef
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
_irq_controller_isr_vector_get() now returns -1 if it couldn't
determine which vector was activated.
Issue: ZEP-602
Change-Id: Ib0f5dbc3b68cc5e2c3a23121530e178aede20d06
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Change the signal ramp up/down config parameters in i2c driver
module to SoC specific.
Jira: ZEP-753
Change-Id: Ie01f1d890a7133d30ea53eee07f60354734a8571
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Originally, x86 just supported APIC. Then later support
for the Mint Valley Interrupt Controller was added. This
controller is mostly similar to the APIC with some differences,
but was integrated in a somewhat hacked-up fashion.
Now we define irq_controller.h, which is a layer of abstraction
between the core arch code and the interrupt controller
implementation.
Contents of the API:
- Controllers with a fixed irq-to-vector mapping define
_IRQ_CONTROLLER_VECTOR_MAPPING(irq) to obtain a compile-time
map between the two.
- _irq_controller_program() notifies the interrupt controller
what vector will be used for a particular IRQ along with triggering
flags
- _irq_controller_isr_vector_get() reports the vector number of
the IRQ currently being serviced
- In assembly language domain, _irq_controller_eoi implements
EOI handling.
- Since triggering options can vary, some common defines for
triggering IRQ_TRIGGER_EDGE, IRQ_TRIGGER_LEVEL, IRQ_POLARITY_HIGH,
IRQ_POLARITY_LOW introduced.
Specific changes made:
- New Kconfig X86_FIXED_IRQ_MAPPING for those interrupt controllers
that have a fixed relationship between IRQ lines and IDT vectors.
- MVIC driver rewritten per the HAS instead of the tortuous methods
used to get it to behave like LOAPIC. We are no longer writing values
to reserved registers. Additional assertions added.
- Some cleanup in the loapic_timer driver to make the MVIC differences
clearer.
- Unused APIs removed, or folded into calling code when used just once.
- MVIC doesn't bother to write a -1 to the intList priority field since
it gets ignored anyway
Issue: ZEP-48
Change-Id: I071a477ea68c36e00c3d0653ce74b3583454154d
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The toolchain headers included an abstraction for defining symbol
names in assembly context in the situation where we're using a
DOS-style assembler that automatically prepends an underscore to
symbol names.
We aren't. Zephyr is an ELF platform. None of our toolchains do
this. Nothing sets the "TOOL_PREPENDS_UNDERSCORE" macro from within
the project, and it surely isn't an industry standard. Yank it out.
Now we can write assembler labels in natural syntax, and a few other
things fall out to simplify too.
(NOTE: these headers contain assembly code and will fail checkpatch.
That is an expected false positive.)
Change-Id: Ic89e74422b52fe50b3b7306a0347d7a560259581
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Completing the terminology change started with change 4008
by updating the Kconfig files processed to produce the
online documentation, plus header files processed by
doxygen. References to 'platform' are change to 'board'
Change-Id: Id0ed3dc1439a0ea0a4bd19d4904889cf79bec33e
Jira: ZEP-534
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
A previous re-work of IRQ priorities was led astray by an incorrect
comment. Priority level 1 is not a non-maskable interrupt priority.
In addition, zero latency IRQs are not implemented on ARC.
Timer driver now doesn't specify IRQ_ZERO_LATENCY (as that wouldn't be
correct) and its IRQ priority is now tunable in Kconfig. The default is 0.
IPM driver on both ARC and x86 side were being configured with hard-coded
priority of 2, which wasn't valid for ARC and caused an assertion failure.
The priority level is now tunable with Kconfig and defaults to 1 for ARC.
Issue: ZEP-693
Change-Id: If76dbfee214be7630d787be0bce4549a1ecbcb5b
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
QMSI boot loader uses GPS0. power.c should use GPS1 for its
purpose because GPS1 is reserved for PM use. Switched to
use GPS1 instead.
Jira: ZEP-647
Change-Id: I653450cd0b42aa80bef21c8a42f4aa39cdaef2ed
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
The boot initialization and boot process of the sensor sub systems
is now using the new system log macros and updated the Kconfig
variable to be a level rather than a bool.
Change-Id: I098143684f8e7077a525e7fcbc93b42b22d427ac
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
