This patch adds a basic HTTP client sample application.
The following HTTP 1.1 methods are supported: GET, HEAD,
OPTIONS and POST.
This sample application does not define an API for HTTP,
for more information see ZEP-346.
Jira: ZEP-827
Change-Id: Iee63a53f2ef424964f040eba20326d648249fc24
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
The README was referring to a specific version of the boot loader.
Since the boot loader version is expected to change in future
and Zephyr code would also correspond to that version, it is better
to not mention any specific version. Instead, the requirement
is to use the latest version of the boot loader.
Change-Id: I04082eec4af16426f6456702c521e8f61bd4e0df
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Due to a limitation on XCC, the inline assembly does not
produce the expected instructions. This results in a wrong
code sequence. On the other hand, plain C code works well.
The note about compilers seems to not be an issue on any of
our currently supported compilers.
Change-Id: I9d2ab0fbf8a48d9dad51da3fd54453f205516d74
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This was ported to the new kernel, no need to keep the old one around.
Change-Id: I02d39c8e39843cee1862448296e9c1d0dfde75b9
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Elaborate the i2c API documentation with each of the errno codes that
can be returned on failure.
Change-Id: I28a690c06b94f724053238b5eba3142fcace23f6
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The DW i2c driver chooses to return -EPERM following a PCI error in
driver configuration. This seems an odd choice. All of the other I2C
drivers return -EIO for general failures detected during driver
configuration.
Switch the DW driver from EPERM to EIO.
Change-Id: Ia4f96386620319736ae4c09212b0a05ea38169b1
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Remove stride[] definition from public API, this definition is not
used by any driver and appears to serve no purpose.
Change-Id: Ib7c9ad4a8e7e17884d150ee811b66db0279d0b33
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The I2C drivers handle an empty list of I2C messages inconsistenty.
There are two different behaviours, one set of drivers dectects a
requests to transfer zero messages and return -EINVAL while the other
group simple transfer no data and return success.
Adopt the latter behaviour consistently across all drivers. Update
the i2c.h API documentation to reflect this behaviour.
Change-Id: I427fc1b0e18ddc04b7b59c294e0240b3d6ca4073
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The controller code should not use BT_ASSERT directly.
Change-Id: If0b7d8e21d2ab4569a564bd03e36e4eb9204c595
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
It is not used outside of sdp.c and has no declaration.
Change-Id: I420a6b98d1b46fedffa29d042267b9c606d04c46
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Add missing README.rst files to the last two samples.
Jira: ZEP-1540
Change-Id: I8dfa6489c6c65872594d4416870e2a41e701595d
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Working Ethernet, and actually even successfully booting with Ethernet
enabled (and Ethernet is enabled by default on enabling networking)
so far requires a network cable attached.
Change-Id: I9c17e417f867942ddf085db9e8342e945aa07370
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
'buf' variable of type struct net_buf was one of the arguments for
finish callback in response to each AT command sent. 'buf' variable
not used in that function. So removed 'buf' variables from the argument
list.
Change-Id: I7d6aa6082f524012ae13a04426915076130ddf69
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
Subscribe value is set to zero before calling notify callback,
to distinguish a subscription failure from an unsubscription
on disconnection (when flag BT_GATT_SUBSCRIBE_FLAG_VOLATILE is set).
Change-Id: Ia91220492d82041b2c385bf88a15180387e7a483
Signed-off-by: Jonathan Gelie <jonathanx.gelie@intel.com>
If found error during service level connection disconnect rfcomm.
Change-Id: Ida425375975b8d60ab1024d07a8ffe7745ae0b54
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
Some application protocol required non-persistente subscription
across connection even in bonded case.
Flag BT_GATT_SUBSCRIBE_FLAG_VOLATILE specify if subscription
must be remove during disonnection.
Change-Id: I1bc2bbbb4bc86f58905e44a7eb267ca0871f2fdb
Signed-off-by: Jonathan Gelie <jonathanx.gelie@intel.com>
Implement the missing port read and write behaviour.
Change-Id: I0928379eddf81d806a0ae6b75a1ea2993c3a28ff
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Adjust the implementation of gpio_pin_read() to return 0 or 1 rather
than 0 or 2^pin. This ensures consistent behaviour with other gpio
device drivers, and conforms to the behaviour documented in gpio.h by
the previous patch.
Change-Id: Ia02aa68105a406f355d16a3f9b0550f948658483
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Clarify the behaviour of gpio read and write functions.
Change-Id: Ib64f9e4bfc6e908a945fd7e17ba4073d3c707fc6
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The subscriptions callback may free or reuse the subscription so all
instances that where this could happen need to safely fetch the next
element which is why this changes switch to use sys_list_t as it has
SYS_SLIST_FOR_EACH_NODE_SAFE.
Change-Id: I37d51f27116ea0c057b560924a9416676477597b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Once the service level connection is done call the connected
callback.
Change-Id: I7541e221d4c03c939682ec70f1d9c093f87ceb09
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
We can go further with taking advantage of k_poll and merge the
connection TX thread together with the HCI command thread, thereby
saving even more memory.
Change-Id: I1792056fd4621d62c7cd05929094033acca45c74
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Now that the k_poll API is available we can use it to have single
connection TX thread instead of multiple ones, which helps reduce the
per-connection memory overhead by a substantial amount.
Change-Id: Icb5d4da87cf0d660bba8da43186d1e76f41c825a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Adds to BT shell app functionality to trigger to be found on remote
A2SRC UUID. Implements user callback to read resolved response data
and uses existing SDP client API to read attributes values.
> HCI Event: Number of Completed Packets (0x13) plen 5
Num handles: 1
Handle: 77
Count: 1
> ACL Data RX: Handle 77 flags 0x02 dlen 48
Channel: 64 len 44 [PSM 1 mode 0] {chan 0}
SDP: Service Search Attribute Response (0x07) tid 2 len 39
Attribute bytes: 36
Continuation state: 0
Combined attribute bytes: 89
Attribute list: [len 84] {position 0}
Attribute: Service Record Handle (0x0000) [len 2]
0x00010005
Attribute: Service Class ID List (0x0001) [len 2]
UUID (3) with 2 bytes [0 extra bits] len 3
Audio Source (0x110a)
Attribute: Protocol Descriptor List (0x0004) [len 2]
Sequence (6) with 6 bytes [8 extra bits] len 8
UUID (3) with 2 bytes [0 extra bits] len 3
L2CAP (0x0100)
Unsigned Integer (1) with 2 bytes [0 extra bits] len 3
0x0019
Sequence (6) with 6 bytes [8 extra bits] len 8
UUID (3) with 2 bytes [0 extra bits] len 3
AVDTP (0x0019)
Unsigned Integer (1) with 2 bytes [0 extra bits] len 3
0x0102
Attribute: Browse Group List (0x0005) [len 2]
UUID (3) with 2 bytes [0 extra bits] len 3
Public Browse Root (0x1002)
Attribute: Bluetooth Profile Descriptor List (0x0009) [len 2]
Sequence (6) with 6 bytes [8 extra bits] len 8
UUID (3) with 2 bytes [0 extra bits] len 3
Advanced Audio Distribution (0x110d)
Unsigned Integer (1) with 2 bytes [0 extra bits] len 3
0x0102
Attribute: Unknown (0x0100) [len 2]
Advanced Audio [len 15]
Attribute: Unknown (0x0311) [len 2]
0x0001
< ACL Data TX: Handle 77 flags 0x00 dlen 12
L2CAP: Disconnection Request (0x06) ident 10 len 4
Destination CID: 65
Change-Id: I8938d9eebda31f3d252ff49adc1a96abfcbc5751
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Removing the module specific buffer pool. If future, use common acl_tx_pool.
Change-Id: Ie1452f981ef43642715be395315845cc2d9bb285
Signed-off-by: Arun Jagadish <arun.jagadish@intel.com>
Detaching the timeout from the tx_thread lets us prepare for merging
all TX threads into a single one with the help of k_poll(). There's no
need to define a new delayed work object since the existing connection
parameter update object and connection timeout will never need to run
in parallel. Additionally, but some CONFIG_BLUETOOTH_CENTRAL guards to
void pulling in unnecessary code when Central role is not enabled.
Change-Id: Ia1f222aa052edcecd484a924f2d9a63a3b8fd11f
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Reduce the pressure on the common RX buffer pool by reusing HCI
command buffers also for the Command Status or Command Complete
response to them. This also implies removing the existing Kconfig
variable for the command buffer sizes since the size is also dependent
on maximum Command Complete event sizes. Instead, reuse the RX buffer
size also for HCI Command buffers.
Change-Id: I006b287d64a0c9ca40de741aa9a424a49a927385
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
With an upcoming patch the HCI command buffers will be reused for the
Command Complete/Status HCI events. The controller HCI code needs some
refactoring to postpone the event buffer allocation so that the
parsing state of the HCI command buffer isn't touched.
Change-Id: I1f614fb9f02ed1886ca84198fbc8c64abc29e44f
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
A subsequent patch will start reusing HCI command buffers for
receiving the response, so the distinction of received vs sent data
headroom would just make the code unnecessarily complex. Instead, just
merge these two variable into a single one.
Change-Id: I31d846331939f1a2270df7ed0c75112825e16493
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The C pre-processor doesn't allow using sizeof() in comparisons such
as "#if FOO < sizeof(bar)". To make it possible to use such
comparisons where the sizes of headers are involved, introduce helper
macros for the headers instead of always having to hard-code magic
numbers into the code.
Change-Id: Iaf654cb4aaa49e83360901f5b01225ba4b952854
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If we are low on RX buffers and receive an LE Advertising Report or a
BR/EDR Inquiry response we should just discard this. If we don't
discard the event we increase the risk of deadlock where the RX
interrupt is enabled but bt_recv() is doing a synchronous HCI command
sending, i.e. waiting for a cmd_status/cmd_complete (which will never
come since the RX interrupt is disabled).
Change-Id: I6266625c9790d68bcf8e8718c8c36f127946c4c6
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If the driver send() fails we need to free up bt_dev.sent_cmd.
Change-Id: I41b6293dfe09f1d94d7f85663ddbebed40cf6e90
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Adds API to allow user get SupportedFeatures attribute ID.
Jira: ZEP-1112
Change-Id: I91a1bf548d99c5c7cc75682aed19e89390350533
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Makes use ProfileDescriptorList atribute API to get remote Hands-Free
profile version.
Jira: ZEP-1112
Change-Id: I3752691057e15c3a9a681dd3277ac160096792e9
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Adds pool memory for storing SDP client query results and introduces
command allowing add HFPAG UUID to be resolved when connection to peer
is already set. When resolved data arrives, UUID callback handler
tries to identify RFCOMM protocol specific information, in this case
remote HFPAG Server Channel Number, stored in Protocol's Descriptor List
attribute data.
> HCI Event: Number of Completed Packets (0x13) plen
Num handles: 1
Handle: 77
Count: 1
> ACL Data RX: Handle 77 flags 0x02 dlen 55
Channel: 64 len 51 [PSM 1 mode 0] {chan 0}
SDP: Service Search Attribute Response (0x07) tid 2 len 46
Attribute bytes: 43
Continuation state: 0
Combined attribute bytes: 96
Attribute list: [len 91] {position 0}
Attribute: Service Record Handle (0x0000) [len 2]
0x00010003
Attribute: Service Class ID List (0x0001) [len 2]
UUID (3) with 2 bytes [0 extra bits] len 3
Handsfree Audio Gateway (0x111f)
UUID (3) with 2 bytes [0 extra bits] len 3
Generic Audio (0x1203)
Attribute: Protocol Descriptor List (0x0004) [len 2]
Sequence (6) with 3 bytes [8 extra bits] len 5
UUID (3) with 2 bytes [0 extra bits] len 3
L2CAP (0x0100)
Sequence (6) with 5 bytes [8 extra bits] len 7
UUID (3) with 2 bytes [0 extra bits] len 3
RFCOMM (0x0003)
Unsigned Integer (1) with 1 byte [0 extra bits] len 2
0x03
Attribute: Browse Group List (0x0005) [len 2]
UUID (3) with 2 bytes [0 extra bits] len 3
Public Browse Root (0x1002)
Attribute: Bluetooth Profile Descriptor List (0x0009) [len 2]
Sequence (6) with 6 bytes [8 extra bits] len 8
UUID (3) with 2 bytes [0 extra bits] len 3
Handsfree (0x111e)
Unsigned Integer (1) with 2 bytes [0 extra bits] len 3
0x0106
Attribute: Unknown (0x0100) [len 2]
Handsfree Gateway [len 18]
Attribute: Unknown (0x0301) [len 2]
0x01
Attribute: Unknown (0x0311) [len 2]
0x0027
< ACL Data TX: Handle 77 flags 0x00 dlen 12
L2CAP: Disconnection Request (0x06) ident 5 len 4
Destination CID: 64
Source CID: 64
> HCI Event: Number of Completed Packets (0x13) plen 5
Num handles: 1
Handle: 77
Count: 1
> ACL Data RX: Handle 77 flags 0x02 dlen 12
L2CAP: Disconnection Response (0x07) ident 5 len 4
Destination CID: 64
Source CID: 64
Jira: ZEP-1112
Change-Id: Ibda606fabe367ca3d0353f77c7093da8c4f175c8
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Adds API to get available specific information included in protocols UUID
tree during parsing Protocol Descriptor List attribute. Usually it's to
be remote Server Channel/PSM number operating on applicable protocol.
There're a few helper functions added to be able parse and retrieve such
information from raw record data.
Jira: ZEP-1112
Change-Id: I736a780b95ba54821d36e6011b739f5ff37cd64f
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
