When log is locally disabled then structures associated with the module
are not created. Logger API macros were evaluating those structues even
when log was disabled for given module. That resulted in compilation
error. Macros has been improved to not touch those structures when
log is disabled for given module.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Updated test description for tickless test cases, grouped test cases
as per doxygen requirements and some uncrustify's cosmetic changes.
Signed-off-by: Spoorthi K <spoorthi.k@intel.com>
Current config files for TLS qemu_x86 contain unrecognized
`CONFIG_RAM_SIZE`, which causes cmake to fail during project generation.
They should not be needed anyway, as qemu_x86 defaults to 8 MB of RAM.
Additionaly, echo_client crashes in this configuration with default main
stack size, hence increase it.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Change define used to select interrupt driven functions
from CONFIG_UART_INTERRUPT_DRIVEN to CONFIG_UART_0_INTERRUPT_DRIVEN.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
1. Added support for two instances of UARTE.
2. Kconfig.nrfx is capable to configure UART and UARTE driver.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
In nsim, 'nsim_mem-dev=uart0,base=0xf0000000,irq=24'
is used to enable a virtual uart.
This uart is only used to output now, so only poll output
is implemented.
If required, input and interrupt driven are possible.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
two configs are contained in this board
* nsim_em: em with arc MPUv2
* nsim_sem: em with arc SecureShield and MPUv3
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
add nsim soc support, two configs are contained
* em with arc MPUv2
* em with arc SecureShield and MPUv3
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
samd21.dtsi includes now the same content need for SAMD20,
move it to samd.dtsi and include it from samd21.dtsi.
Then later USB support can be added to the samd21.dtsi seperatly
from the samd20 etc.
Signed-off-by: Sean Nyekjaer <sean@nyekjaer.dk>
The SAMD0 Family have almost the same clock options.
The samd20 and samd21 only clocks is not implemented yet.
Signed-off-by: Sean Nyekjaer <sean@nyekjaer.dk>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Atmel Software Framework (ASF) provides a set of low-level header
files that give access to different hardware peripherals of Atmel's
ICs.
Origin: Atmel SAMD20 Series Device Support (1.2.91)
License: Apache-2.0
URL: http://packs.download.atmel.com/Atmel.SAMD20_DFP.1.2.91.atpack
Purpose: Introduction of ASF for the SAM0 series.
Maintained-by: External
Signed-off-by: Sean Nyekjaer <sean@nyekjaer.dk>
The EFR32 Flex Gecko Wireless Starter Kit contains sensors and
peripherals demonstarting the usage of the EFR32FG1P SoC
family. This patch add basic support for this board.
Signed-off-by: Christian Taedcke <hacking@taedcke.com>
This keeps the efm32wg soc.h in sync with the efr32fg1p soc.h.
This include is currently not necessary, but will be for further
peripheral drivers.
Signed-off-by: Christian Taedcke <hacking@taedcke.com>
The Silicon Labs EFR32FG1 Flex Gecko MCU includes:
* Cortex-M4F core at 40MHz
* up to 256KB of flash and 32KB of RAM
* integrated Sub-GHz and/or 2.4GHz radio
* multiple low power peripherals
Signed-off-by: Christian Taedcke <hacking@taedcke.com>
This includes:
* the Gecko SDK files for the EFR32FG1P SoCs
Origin: Silicon Labs Gecko SDK
URL: https://github.com/SiliconLabs/Gecko_SDK
Version: v5.1.2 (SHA: 938464c68e6c3b2237388a692f767bb0767ec010)
Purpose: Add support for Silicon Labs EXX32 SoCs
License: Zlib
Maintained-by: External
To update the Gecko SDK, download the current version from the given URL
and replace the following folders:
* Gecko_SDK/platform/Device/ should replace ext/hal/silabs/gecko/Device/
* Gecko_SDK/platform/emlib/ should replace ext/hal/silabs/gecko/emlib/
Signed-off-by: Christian Taedcke <hacking@taedcke.com>
Previously the syscall list was generated only from the include
folder. This is a limitation when the application tries to create
system calls. This patch create a simple way to include these
new syscalls without the application touching the kernel.
This can be enabled by a Kconfig CONFIG_APPLICATION_DEFINED_SYSCALL.
Once enabled the application source directory will be scanned to
find all application defined syscalls.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Reduces the number of mpu regions statically reserved at boot time by
one, giving a total of five. We originally sought to reduce the total to
three: 1 background region with lowest precendence for supervisor r/w, 1
flash region, and 1 sram region. However, the nxp mpu hardware does not
give precedence to any region over another, and thus we cannot revoke
access from the background region with a higher priority region. This
means we cannot support hardware stack protection with a single
background region.
Instead, create two background regions that cover the entire address
space, except for sram.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Since the UART0 @ 0x40002000 can either be UART or UARTE the user of the
soc.dtsi needs to select either compatible = "nordic,nrf-uarte" or
"nordic,nrf-uart"
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If we select UART0 as UARTE we will get different defines from the
generation script. Support both UART and UARTE for UART0. Also fixup
UART1 defines since this will always be UARTE.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fix the title comment in the linker.ld script for ARM, to
make it clear that this is the common linker script for all
Cortex-M based platforms.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The PHYS_LOAD_ADDR Kconfig symbol was removed by commit b8ea7c889d
("x86: remove HAS_DTS checking"). The ROM_SIZE Kconfig symbol was
removed by commit e524f0b846 ("dts: x86: derive RAM and ROM size from
dts instead of Kconfig").
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The dependency on the GPIO driver was a bit artificial, since the UART
driver used the GPIO API functions only to configure the pins at its
initialization. This configuration will be done by using nrfx GPIO HAL
functions directly, just like in case when a shim is using
an nrfx driver underneath.
HAL functions can be fed with the absolute pin numbers, that are
currently used for Nordic SoCs in Kconfig and DT, and for the GPIO
driver an additional translation would be required, to extract
the port and its relative pin number.
UART driver has to be initialized at PRE_KERNEL_1 (because of the
console using it) and currently the GPIO driver is initialized
at POST_KERNEL stage, so calling its API function form the UART
initialization routine was incorrect.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Having 24 parameters in a debug print is a bit extreme especially
as it is causing warning from new logger. Split the debug print
to three pieces each having 8 parameters which is more reasonable.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fixes issues caused in GPIO driver due to overlapping GPIOTE
channel use in nRF5 software PWM driver and in Bluetooth
controller for implementing PA/LNA feature.
The issue is solved by assigning the base and available
channel count for GPIOTE considering whether PWM and/or
PA/LNA feature is selected in the Kconfig.
Fixes#8815.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Uninitialized variable error could lead to a situation where
printk calls processed by the logger were dropped.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The macro parameters need to be protected by (), otherwise it
is possible to get this kind of warning
include/logging/log_core.h:214:6: note: expected
‘u32_t {aka unsigned int}’ but argument is of type ‘char *’
void log_3(const char *str,
This can happen for example if the macro parameter is not plain
variable. Example:
NET_DBG("Route %p nexthop %s", route,
nexthop ? net_sprint_ipv6_addr(nexthop) : "<unknown>");
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Adds @MaureenHelm as code owner for sensor drivers, and updates the
pattern to match subdirectories.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
SDK 0.9.3 has been out for a while, to avoid inconsistency and false
positive when filing bugs, require the latest version.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add first set of boards which can be built with xtools, this will
include all boards at some point, so we might need a better way to
whitelist toolchains that does not include changing every single board
definition file. For now enabling those needed for testing the new
toolchain.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Latest crosstools NG supports ARC, so add it here for those who build
their own toolchains using xtools-ng or use the scripts from sdk-ng repo
in the zephyr project.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Similar fix as in commit b26ca13672. Just later in the same
function. This is how the logic used to be before quite heavy redesign
that happened a while ago.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add TSN (Time Sensitive Networking) description to networking
overview document. Also make sure that gPTP documents are linked
together properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
