There are use cases where it's beneficial to trigger the log
thread to process log messages as soon as able instead of waiting
for the processing timer or threshold triggers. An example would be
to flush the log buffer before entering the idle thread after
forcing a system power state.
Signed-off-by: Corey Wharton <xodus7@cwharton.com>
Test has code to test conditions where CONFIG_LOG_PROCESS_THREAD=y
but this option was not enabled in any of the tests. This code was
using removed APIs and did not build anymore. This change enables
the log thread for the logging.async and fixes the tests.
Signed-off-by: Corey Wharton <xodus7@cwharton.com>
A few tests involving TCP were missing TCP teardown delay. Adding these
improves tests stability when testing in a loop for longer periods (i.
e. with CONFIG_ZTEST_SHUFFLE enabled).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add a test for the flash simulator preserving memory across a
`sys_reboot` through the use of memory regions.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Due to recent changes, as simple k_yield() is not enough on some
platforms (nRF platforms for example), as the entropy subsystem is now
used because of PE, which may block, causing context switch before
entire RA message is processed.
Fix this by adding small delay before checking if RA was processed
properly.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Exclude some more platforms from the tests.
They provoke devicetree-related build errors which weren't introduced
by the changes in this PR (#71947).
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
As part of ongoing work to move away from TinyCrypt and towards PSA
(#43712), make fs_mgmt use either PSA (when available) or MbedTLS
(as a fallback) for SHA-256.
The use of PSA is guarded by CONFIG_MBEDTLS_PSA_CRYPTO_CLIENT
which requires a locally-built PSA core for devices without TF-M.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Make `bt_hci_cmd_send_sync` return `-EACCES` when receiving
`BT_HCI_ERR_CMD_DISALLOWED`.
Update some tests that were expecting `-EIO` when
getting `BT_HCI_ERR_CMD_DISALLOWED`.
Add a warning in `set_random_address` when getting that new error. This
is done in case someone try to set a new random address while legacy
advertising, scanning or initiating is enabled. This is illegal behavior
according to the Core Spec (see Vol 4, Part E 7.8.4).
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Derive BT_CTLR_ISO_TX_BUFFER_SIZE from BT_ISO_TX_MTU to have
optimal Controller memory allocations.
BT_CTLR_ISO_TX_BUFFER_SIZE can be set lower than
BT_ISO_TX_MTU in which case upper layer can send fragmented
SDU to the Controller.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
`rtio_sqe_prep_write()` and `rtio_sqe_prep_read()` memset the sqe
struct to zeroes, clearing any configuration previously set. This
commit changes this sequence in the test, such that the sqe's are
prepared, then additional flags/configs applied.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
Add overlay and conf for emulated boards allowing the test suite
along with the emulated GNSS driver to be built and tested by CI.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Add GNSS API test suite validating the behavior of a GNSS
device adheres to the GNSS API.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Add overaly files for Application and Radio cores.
Configure test according to watchdog features
available on nRF54H20.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
Add a case, testing building an llext from multiple files, calling
functions and accessing data across files.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
CONFIG_MINIMAL_LIBC was required for:
- CONFIG_MINIMAL_LIBC_NON_REENTRANT_FUNCTIONS
- CONFIG_MINIMAL_LIBC_RAND
while CONFIG_ENTROPY_GENERATOR and CONFIG_MBEDTLS_ZEPHYR_ENTROPY
are required for CRYPTO_C.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Remove dependency on netif for net.tls_credentials.trusted_tfm
in order to have the test fully built and executed in at least
1 platform (i.e. mps2/an521/cpu0/ns)
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
When building ISO applications on a device that has the host
and controller on the same core, the application developer
shouldn't have to set controller specific configurations.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
With the previous changes, usb_set_config() is no longer called by
default at boot time, causing the test to fail.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
In 972a4d9f6f
the test was relaxed to allow a possible parallel thread
waking the CPU during the idle timeout checks.
How this was done though, a system timer driver
which wakes the kernel spuriously a bit before the
correct deadline would not be detected, even
though it should.
Let's fix this, ensuring the timer has been
called when we check the wake time in inside the
expected range.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The b_u585i_iot02a platform already has an 'eeprom0' node in the default
devicetree. Delete the default node so that the overlay can define the
nodes needed for the test.
Signed-off-by: Bram Vlerick <bram.vlerick@openpixelsystems.org>
Adds test for timeout script chat command, which is a script
chat command where only the timeout parameter is set. The
script will simply wait for the timeout duration, then move
on to the next script chat.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
This sets the number of arguments for SMF_CREATE_STATE() to always
be the same, independent of the selected Kconfig options.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
The `BT_DEBUG_*` Kconfig symbols have been deprecated for more than 2
versions, remove them.
Update code that was still using them.
Remove the Bluetooth specific `Kconfig.template.log_config_bt` and use
`Kconfig.template.log_config_inherit` from the logging subsystem
instead, now that the legacy symbols can be removed.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Add the CAP commander reception start procedure which starts reception
on one or more CAP acceptors
With the implementation of broadcast reception start procedure we also need
some mockups for unit testing
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
There needs to be at least one network interface in order
to avoid this error.
E: There is no network interface to work with!
So enable loopback support which creates a loopback interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Make sure the IPv6 source address selection works as expected
when using the IPV6_ADDR_PREFERENCES socket option.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This commit introduces a new test case for veryfing that addition and
deletion of multicast routing entries emit MLDv2 reports when needed
and if multicast routing entries are appended to MLDv2 records properly.
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
Add support for VPR CLIC to `nested_irq` kernel test.
Verified on nRF54L15 FLPR for now.
Signed-off-by: Marcin Szymczyk <marcin.szymczyk@nordicsemi.no>
`CONFIG_RISCV_RESERVED_IRQ_ISR_TABLES_OFFSET` offsets IRQ in
vector table, align test to this functionality.
Signed-off-by: Marcin Szymczyk <marcin.szymczyk@nordicsemi.no>
