Adds coexistence Bsim test for Opcode Aggregator models using loopback.
The test verifies that the Opcode Aggregator server and client can send
messages to each other on the loopback interface.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Adds coexistence Bsim test for Opcode Aggregator models.
The test verifies that the Opcode Aggregator server and client can be
present and functional when operating on the same device.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
The call to bt_micp_mic_ctlr_mute_get function will return the value of
mute state in bt_micp_mic_ctlr_cb.mute callback. This fixes invalid
function calls by storing the recent mute state value in the
application.
Fixes: MICP/CL/SPE/BI-01-C
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The test delegates putting the server socket into listening (i. e.
calling listen() on the socket) to a separate thread, which did have a
chance to run before client attempted to establish TCP connection.
This was not visible before, as we did not reply with RST to a
connection attempt on a closed port, so the connection was eventually
establish after SYN retransmission. But as we do reject such a
connection now with RST, the connection attempt failed. Therefore, a
small delay was added after spawning the server thread, to give it a
chance to configure the server socket.
Additionally, lower the CONFIG_NET_TCP_TIME_WAIT_DELAY value so that TCP
contexts are released earlier, and add a respective delay in the test
teardown function. Not doing so also triggered unneeded SYN
retransmissions, as there were no enough TCP context to accept the
incoming connection, before freeing the resources allocated for the
previous one.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When resource instances are initialized, we must calculate
beginning of the data buffer using the index and maximum
data length. Otherwise buffers would overlap with previous.
Fixes#64011
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Add a test for the broadcast sink that uses the BAP
Scan Delegator functionality with a Broadcast Assistant
device adding the broadcast source.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Resend the request with Echo option and the received Echo
option value when receiving a 4.01 (Unauthorized) response
with the Echo option.
Add missing header file kernel.h to coap_client.h.
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
PTS uses BLOB server model instantiated by DFD server for MBT tests as
it is the first BLOB server model in the device composition data. DFU
server, which also has BLOB server model, is instantiated after DFD
server.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
PTS requires IUT to send requests with page number with
0xFF or the highest supported page number in order to
retrieve all the composition data pages from the lower
tester.
This commit add the page number to the response, thus
the upper tester can follow the last page number and
send the next page request until page 0 is requested.
Signed-off-by: Alperen Şener <alperen.sener@nordicsemi.no>
I have seen the CI hang (both downstream and upstream) as the executable
doesn't always respond to the SIGTERM sent by `timeout`.
This will prevent that behavior. 5 whole seconds ought to be enough to
clean-up a small program.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Adds Bsim test that verifies private beacon cache functionality.
The test checks that replays of the same private beacon
message is discarded.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Adds Bsim test that verifies SNB cache functionality.
The test checks that replays of the same SNB
message is discarded.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Validates that nothing nefarious happens if the application decides to
wait an arbitrary amount of time in notification callbacks.
Also validates that a disconnection during said waiting works as
expected.
E.g. in #48505, the user was trying to send data synchronously over UART
_inside_ the notification callback. Then the device was disconnected
whilst still waiting.
This kind of pattern is not recommended, but the stack should still
function correctly, stalling the "BT RX" thread shouldn't result in
state corruption or resource leakage.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
When the initiator provides CCID in the metadata, we verify
that the CCIDs exist on the device.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a testcase to run the same test application and GDB script
which we use for Zephyr GDB stub testing, but now with
the GDB stub enabled at QEMU itself using it as a reference
RDP backend implementation. This allows to check the Zephyr's
gdbstub implementation has similar behavior as the reference.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Add `gdb_target_remote` test parameter for GDB `target remote`
command instead of its hardcoded value to allow different types
of gdbstub serial interfaces as well as different TCP ports in
gdbstub test suites possibly run in parallel on the same host.
Move all GDB log configuration parameters from GDB script to
the fixture code.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Gdbstub test improvements: using pytest fixtures, parametrization, and
expected pattern matching on outputs from GDB and the test application.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Clone samples/subsys/debug/gdbstub to tests and convert it back
to a build-only sample aligned with documentation.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
The infinite loop during the test needs to be broken
with a small delay when built for native targets.
Let's add it.
Note that this delay is only added for ARCH_POSIX targets
and not any other.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This test should be compiled without host headers
when built without the host libC, and at the same
time, it does not support building with the host
libC, so let's remove the condition that includes
the host libC header to avoid extra confusion.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The infinite loop during the stress needs to be broken
with a small delay when built for native targets.
Let's add it.
Note that this delay is only added for ARCH_POSIX targets
and not any other.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Update the BSIM test and the shell to use
bt_audio_codec_cfg_set_chan_allocation rather than implementing
their own versions.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This changes qemu_xtensa to use dc233c core instead of
sample_controller. The sample_controller uses a very
basic configuration which lacks features usually needed
in real world applications. Instead, use the dc233c core
as the base for qemu_xtensa so we can use QEMU to cover
more of our code path.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This change slightly simplifies the configuration of a CSL receiver and
generalized CSL_RX_TIME to EXPECTED_RX_TIME as a re-usable primitive
across several timing-sensitive IEEE 802.15.4 standard sub-protocols
(namely BE-PANs/DSME/CSL/RIT/TSCH).
This API change is based on the rules outlined in RFC #61227.
Fixes: #62918
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Add new configuration value CONFIG_LWM2M_UPDATE_PERIOD
that allows calculating update period from last update,
instead of calculating it from the lifetime.
In runtime, server is allowed to change the lifetime of the
registration which causes update perdiod to be effected.
When fixed update period is preferred, UPDATE_PERIOD
config is then used.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
The BAP unicast babblesim tests now does RX and TX
and verifies that the data is correctly received on both
the client and server.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add validation of sending and receiving dummy data.
Previously, due to a bug, we actually never sent any data
and still passed the test.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Refactor the codec_cfg_get_frame_duration function to return the
assigned numbers value, instead of a converted value, but with
support for converting the value.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This is to increase probability of reception of responses (Config Status
messages) from the node when the provisioner sends a Set message and the
node response with a Status message at the same time so that the message
collide.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Since notice that simultaneous advertising is not only used
by relay message, provision over pb-adv can also be used.
so it was changed to a more general name.
refs:https://github.com/zephyrproject-rtos/zephyr/pull/48903
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Verify that a HAS Server IUT sends changed characteristic notifications
or indications when the Lower Tester reconnects.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Add the following XPRO boards to flash driver test:
SAMD20, SAMDE54 and SAMR21
Signed-off-by: Daniel Evans <photonthunder@gmail.com>
Co-authored-by: Gerson Fernando Budke nandojve@gmail.com
