This commit renames all local definitions with the name `PORT` in the
net tests, in order to prevent name conflict with certain HALs
(notably, Atmel SAM E5x HAL).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
No point to change the throw_sleep to k_timeout_t because we
are calculating the timeout beforehand which can lead to
unexpected results if using k_timeout_t.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It is useful to know which test fails to semaphore timeout so
add line number of the failing test to assert print.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The net_context API will change, the s32_t timeout parameter
will be changed to k_timeout_t. All the Zephyr users of this API will
be changed in subsequent commits. This is internal Zephyr API only,
so the API is not deprecated etc.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Mention in websocket API documentation that the timeout value
is in milliseconds. Check timeout values properly using K_TIMEOUT_EQ()
macro.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Even though radio driver can report in its capabilities that it does
support CSMA CA, there's no way in the driver to select how the frame
should be transmitted (with CSMA or without). As layers above radio
driver (Thread, Zigbee) can expect that both TX modes are available, we
need to extend the API to allow either of these modes.
This commits extends the API `tx` function with an extra parameter,
`ieee802154_tx_mode`, which informs the driver how the packet should be
transmitted. Currently, the following modes are specified:
* direct (regular tx, no cca, just how it worked so far),
* CCA before transmission,
* CSMA CA before transmission,
* delayed TX,
* delayed TX with CCA
Assume that radios that reported CSMA CA capability transmit in CSMA CA
mode by default, all others will support direct mode.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Use the appropriate K_SECONDS() or K_MSEC() macros to pass a timeout to
k_sleep() and other kernel APIs.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Identify when received PUBLISH message is malformed and overall packet
length received is smaller than parsed variable header lenght.
Add unit test to cover this case.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The standard allows up to 4 bytes of packet length data, while current
implementation parsed up to 5 bytes.
Add additional unit test, which verifies that error is reported in case
of invalid packet length.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
By changing the various *NET_DEVICE* macros. It is up to the device
drivers to either set a proper PM function or, if not supported or PM
disabled, to use device_pm_control_nop relevantly.
All existing macro calls are updated. Since no PM support was added so
far, device_pm_control_nop is used as the default everywhere.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Earlier tests were not going through ICMP echo
core stack handlers. Due to that unable to verify
echo reply. Tests are improved to verify replies.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Using MQTT_UTF8_LITERAL() allows to reduce code and make it less error
prone, since utf8 length is calculated automatically by the macro.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Add a simple test to verify that the bind() can be called multiple
times if AF_PACKET is set and there are multiple network interfaces
in the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Test case for IPv4 header options was added but
CONFIG_NET_IPV4_HDR_OPTIONS option was not enabled.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Wrong option length in IPv4 header options testcase
added. This should cover malformed packet case.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Added simple test case for net_pkt_clone() to verify
cursor position after cloning.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Switch to `NET_SOCKET_REGISTER` mechanism over the offloaded API
registration.
Including the following fixes from the review:
* The fd returned by the socket accept call needs to be finalized,
similar to how it is done for socket creation.
* sl_RecvFrom() in TI SimpleLink Host driver does not support NULL
pointers for 'from' address and address length, and sl_SendTo() does
not ignore the destination address when in connection mode, so passing
NULL would cause a failure. These issues have been reported to TI
(CC3X20SDK-1970, CC3X20SDK-1971).
Let's use sl_Recv and sl_Send to implement recvfrom/sendto in the case
of NULL addresses.
* simplelink_poll() should not process negative file descriptors in the
fds array after sl_Selecti() returns. A negative fd value indicates
that the entry is invalid and should be ignored.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
It's no longer needed to call `mqtt_input` after `mqtt_disconnect`.
Doing this will actually return an error as the MQTT connection is no
longer active after calling `mqtt_disconnect`.
Fixes#22360
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
So far, nRF 802.15.4 radio driver build was dependent on the 802.15.4
subsystem in Zephyr. While this was a reasonable approach for samples,
it prevented the radio driver from being built as a standalone entity,
which could be useful in some applications (e. g. running core nRF
802.15.4 radio driver tests with Zephyr).
Resolve this, by providing a separate set of Kconfigs for the radio
driver, therefore allowing to build it as a separate entity. The 802154
subsystem simply enables the radio driver module in this case.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The reworked 6lowpan implementation asserts when no LL source or
destination address is set on a packet. This caused the fragmentation
tests to fail before they completed.
Fix the issue, by setting a dummy address on a packet during a setup.
Fixes#19761
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
NET_INIT_PRIO (defined in subsys/net/ip/Kconfig) is currently hardcoded
to 90 (it's not set via any Kconfig.defconfig files either). Maybe it
could be given a prompt or be removed, but just remove the assignment
for now.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
The prompt was removed in commit 2ec7e70509 ("net: routing: Hide routing
option temporarily").
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
This symbol is selected by IEEE802154_RAW_MODE, defined in
drivers/ieee802154/Kconfig.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
This symbol is enabled through being selected by IEEE802154_CC1200 and
IEEE802154_RF2XX.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
This symbol is already enabled indirectly through being selected by
NET_L2_IEEE802154_RFD, which is enabled in the configuration file.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
(There doesn't seem to be any way to enable this symbol, because it's
not being select'ed either.)
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Fix ASSERTs that appears when enabling asserts in net buf.
Asserts are:
- Pulling from net buf before any data has been added.
- Pulling more data than has been allocated for the buf.
Fix warning:
W: You have 1 IPv4 net_if addresses but 2 network interfaces
W: Consider increasing CONFIG_NET_IF_MAX_IPV4_COUNT value.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix byteorder test writing past the data pointer. This would otherwise
have been caught by the assert, but net buf asserts were not enabled in
the test. Reset the buffer between different tests to re-use the same
16-byte buffer.
Turning on asserts gives:
starting test - net_buf_test_byte_order
ASSERTION FAIL [net_buf_simple_tailroom(buf) >= len] @
ZEPHYR_BASE/subsys/net/buf.c:775
E: r0/a1: 0x00000004 r1/a2: 0x00000307 r2/a3: 0x00000000
E: r3/a4: 0x00006d79 r12/ip: 0x00000000 r14/lr: 0x000028ad
E: xpsr: 0x61000000
E: Faulting instruction address (r15/pc): 0x000050b0
E: >>> ZEPHYR FATAL ERROR 4: Kernel panic on CPU 0
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix ASSERTs that appears when enabling asserts in net buf when adding
more data than has been allocated for the buf.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
Also remove the assignments to the other NET_GPTP_CLOCK_ACCURACY_*
symbols. They are all in the same choice (in
subsys/net/l2/ethernet/gptp/Kconfig), meaning only one of them can be
enabled, and the choice already defaults to
NET_GPTP_CLOCK_ACCURACY_UNKNOWN, which is the symbol assigned last.
The symbol assigned last becomes the choice selection when multiple
symbols in a choice are assigned to. The other choice symbols still
become n. Dependencies override assignments.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The code tried to use the allocated pkt ptr before checking for
NULL value.
Fixes#21699
Coverity-CID: 206608
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The test name did not reflect the purpose of the test.
Also add "poll" tag so that we can more easily launch just
this test.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
