Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add more tests to verify that we discard malformed packets.
In order to simplify the testing, separate message validation to
dns_validate_msg() function in resolve.c. Allow that function to
be called from unit test. This way we can construct invalid DNS
messages in unit test and verify that they are discarded when
needed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add some tests for testing AF_PACKET and SOCK_DGRAM type
sockets. These are sockets where Ethernet header is automatically
added, caller just needs to provide upper stack header.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Added additonal checks in net_ipv6_input to ensure that multicasts
are only passed to the upper layer if the originating interface
actually joined the destination multicast group.
Signed-off-by: Philip Serbin <philip.serbin@lemonbeat.com>
net: route: Add prefix-based ipv6 multicast forwarding
This adds/reenables the feature of multicast routing/forwarding.
The forwarding decision is based on the added multicast routes
and the new network interface flag:
NET_IF_FORWARD_MULTICASTS.
Signed-off-by: Jan Georgi <jan.georgi@lemonbeat.com>
Only one LOG_MODULE_REGISTER() is allowed in the files that are
linked together. The other files must use LOG_MODULE_DECLARE()
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
TCP2 uses slightly more network packets and connections in the
socket poll test, so increase the values for the test.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The tests were failing when run on those boards that had
physical Ethernet support. In that case there were three Ethernet
interfaces, two simulated ones for testing, and the third one
was provided by the board. This extra Ethernet interface caused
the test to fail as the test was sending data to wrong interface.
Fixes#27238Fixes#26568
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Modify the tests so that they verify that only allowed thread
is able to modify network interface data.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Since the peer isn't replying on SYN resend, update the
test to check for failed connect.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Since the connect is now blocking, update the timeout values
for the tests to pass.
In case of resend test, set the timeout to 1000ms to account
for the retransmission.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Unit tests were failing to build because random header was included by
kernel_includes.h. The problem is that rand32.h includes a generated
file that is either not generated or not included when building unit
tests. Also, it is better to limit the scope of this file to where it is
used.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This is a test, and the function is called with K_FOREVER, so it's not
supposed to fail.
Fixes: #25735
CID: 210582
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If we have multiple network interfaces and we are waiting incoming
network packets, make sure to honor the bind of the socket so that
correct socket will receive data in certain network interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This tests make sure that the right source address is chosen during
the mesh multicasting.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Unit test code requires IPv6 to be ready. Select
CONFIG_NET_CONFIG_NEED_IPV6=y to ensure that.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Unit test code requires IPv6 to be ready. Select
CONFIG_NET_CONFIG_NEED_IPV6=y to ensure that.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming multiple projects
"NONE" defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names, small, manual adjustments
have been done.
See also 7eabab2f5d ("samples, tests: Use semi-accurate project names")
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
This socket is shared by all the test cases which run in
different threads. Just make it a global object here.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
If we are calling sendmsg() without any aux data, then msg_controllen
is 0 and msg_control is NULL. Check these allowed values properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we are calling sendmsg() for a connected socket, then msg_namelen
is 0 and msg_name is NULL. Check these allowed values properly.
Also modify unit tests so that we test this scenario.
Fixes#25925
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
... because it is (required).
This makes a difference when building with CMake and forgetting
ZEPHYR_BASE or not registering Zephyr in the CMake package registry.
In this particular case, REQUIRED turns this harmless looking log
statement:
-- Could NOT find Zephyr (missing: Zephyr_DIR)
-- The C compiler identification is GNU 9.3.0
-- The CXX compiler identification is GNU 9.3.0
-- Check for working C compiler: /usr/bin/cc
-- ...
-- ...
-- ...
-- Detecting CXX compile features
-- Detecting CXX compile features - done
CMake Error at CMakeLists.txt:8 (target_sources):
Cannot specify sources for target "app" which is not built by
this project.
... into this louder, clearer, faster and (last but not least) final
error:
CMake Error at CMakeLists.txt:5 (find_package):
Could not find a package configuration file provided by "Zephyr" with
any of the following names:
ZephyrConfig.cmake
zephyr-config.cmake
Add the installation prefix of "Zephyr" to CMAKE_PREFIX_PATH or set
"Zephyr_DIR" to a directory containing one of the above files. If
"Zephyr" provides a separate development package or SDK, be sure it
has been installed.
-- Configuring incomplete, errors occurred!
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
A quick test on a dummy device that:
- opens a socket (success)
- sends data (success)
- suspends (success)
- suspends (failure)
- sends data (failure)
- resumes (success)
- resumes (failure)
- sends data (success)
This permits to show that PM states are properly handled in network
stack.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
For success cases, the net_pkt is handled by the IP stack
so no need to free the net_pkt. The double free is not causing
any issues as the net_pkt code will just ignore the request but
we should avoid doing it because of error prints that are printed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Kernel objects were being directly accessed without previously
calling k_thread_access_grant().
This change allows each test that requires an asynchronous
event to send it to a common work queue with correct
permissions.
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Tests should always start with test_, otherwise detection of subtests
will not work through sanitycheck.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use DT_INST_SPI_DEV_HAS_CS_GPIOS() in drivers to determine if we should
utilize CS_GPIO base SPI chipselect handling. This allows us to remove
Kconfig option for this feature.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit removes the redundant `LOG` and `LOG_IMMEDIATE` selections
in `prj.conf`, since the `TEST_LOGGING_DEFAULTS`, which is enabled by
default for all tests, selects `LOG` and `LOG_MINIMAL`.
This effectively allows the test to run with the default test logging
policy, set by the testing subsystem.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
If we have removed first net_buf, then we must not restore the
original cursor as that will point to wrong head net_buf.
Add also unit test to check that the packets are removed
properly.
Clarify the documentation that we are removing data from
beginning of the function, also document that the cursor
is reset after this call.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
