A race condition for the test occurs as the service might have started
when booting.
Do not autostart the service to verify the port stays 0.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Add extra checks that make sure that msg_iov is set
as we cannot receive anything if receive buffers are
not set.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Since the TCP context (and thus net_context) is not dereferenced
directly from the test thread anymore, add a small delay so that TCP
work queue have a chance to run, before checking net_context count or
reusing the port on new allocation.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If the rdclient is suspended or deregistered any network errors caused
by lwm2m_engine and forwarded by socket_fault handler should not change
the rd client state.
Signed-off-by: Andreas Chmielewski <andreas.chmielewski@grandcentrix.net>
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Set separate option getters for bool, uint8_t and uint16_t
values. Use those generic getters when fetching the desired
option value.
Noticed mixed usage (bool vs int) for txtime option. Changed
the code to use int type like in other options.
The uint16_t option getter gets the value from uint16_t variable
but returns int value to the caller, and also expects that user
supplies int value.
For uint8_t value, it is expected that uint8_t value is supplied
instead of int.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add test case to ensure that NET_EVENT_IF_HOSTNAME_CHANGED event is
triggered properly when the hostname changes.
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
Make sure recvmsg() is able to return IPv4 IP_PKTINFO and
IPv6 IPV6_RECVPKTINFO ancillary data to the caller.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Implement test cases:
LightweightM2M-1.1-int-303 - Cancel observations using Observe with
Cancel parameter
LightweightM2M-1.1-int-305 - Cancel Observation-Composite Operation
Modify existing Leshan API to passive_cancel().
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Test case:
LightweightM2M-1.1-int-235 - Read-Composite Operation on root path
is now working as Leshan added a support for reading the root path.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Implement write and remove attributes command for Leshan.
Remove all written attributes at the end of test, so it won't
affect the next test case.
Remove skip marks from testcase that is fixed on Leshan side.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Added igmpv3 support based on the already existing structure for igmpv2.
The already existing api is not modified to prevent breaking exisiting
applications.
Signed-off-by: Ibe Van de Veire <ibe.vandeveire@basalte.be>
Enable these tests for native_sim and switch from
native_posix to native_sim as default test platform
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable these tests for native_sim and switch from
native_posix to native_sim as default test platform
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable these tests in native_sim
and switch from native_posix to native_sim as default
test platform
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Further reduce code duplication by moving test code for similar test
cases into a helper function, parametrized based on the test case.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Move code responsible for net context initialization, repeated over
multiple test cases, to a helper function to reduce code duplication.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Modify internal L4 protocols APIs, to allow to enforce checksum
calculation, regardless of the checksum HW offloading capability.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Implement testcases for Information Reporting Interface [300-399]:
* LightweightM2M-1.1-int-301 - Observation and Notification of parameter
values
* LightweightM2M-1.1-int-302 - Cancel Observations using Reset
* LightweightM2M-1.1-int-304 - Observe-Composite Operation
* LightweightM2M-1.1-int-306 – Send Operation
* LightweightM2M-1.1-int-307 – Muting Send
* LightweightM2M-1.1-int-308 - Observe-Composite and Creating
Object Instance
* LightweightM2M-1.1-int-309 - Observe-Composite and Deleting
Object Instance
* LightweightM2M-1.1-int-310 - Observe-Composite and modification of
parameter values
* LightweightM2M-1.1-int-311 - Send command
303 and 305 cannot be implemented using Leshan as it only support
passive cancelling of observation.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
When testcases share one DUT per module, we save the time
from running bootstrap on each testcase.
Each testcase start with DUT that is registered.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Implement support for reading stream of events from Leshan.
This allows testing the LwM2M SEND/Notify/Update operations
and reading content of those.
Also convert the whole Leshan class to use requests.session() so
it pools up connections and uses keep-alive.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Add remaining test cases from
Device management & Service Enablement Interface
* LightweightM2M-1.1-int-222 – Read on Object
* LightweightM2M-1.1-int-223 – Read on Object Instance
* LightweightM2M-1.1-int-224 – Read on Resource
* LightweightM2M-1.1-int-225 – Read on Resource Instance
* LightweightM2M-1.1-int-226 – Write (Partial Update) on
Object Instance
* LightweightM2M-1.1-int-227 - Write (replace) on Resource
* LightweightM2M-1.1-int-228 - Write on Resource Instance
* LightweightM2M-1.1-int-229 - Read-Composite Operation
* LightweightM2M-1.1-int-230 - Write-Composite Operation
* LightweightM2M-1.1-int-231 - Querying basic information
in SenML JSON format
* LightweightM2M-1.1-int-232 - Querying basic information
in SenML CBOR format
* LightweightM2M-1.1-int-233 - Setting basic information
in SenML CBOR format
* LightweightM2M-1.1-int-234 - Setting basic information
in SenML JSON format
* LightweightM2M-1.1-int-235 - Read-Composite Operation on root path
* LightweightM2M-1.1-int-236 - Read-Composite - Partial Presence
* LightweightM2M-1.1-int-237 - Read on Object without specifying
Content-Type
* LightweightM2M-1.1-int-241 - Executable Resource: Rebooting the device
* LightweightM2M-1.1-int-256 - Write Operation Failure
* LightweightM2M-1.1-int-257 - Write-Composite Operation
* LightweightM2M-1.1-int-260 - Discover Command
* LightweightM2M-1.1-int-261 - Write-Attribute Operation on a multiple
resource
* LightweightM2M-1.1-int-280 - Successful Read-Composite Operation
* LightweightM2M-1.1-int-281 - Partially Successful Read-Composite
Operation
Modify tests binary
* Allow CoAP payload of 1211 bytes.
* Allow outgoing messages to use block-wise if they are bigger.
* Use 4kB encode buffer for outgoing messages.
* Check configured heap and stack sizes.
* Limit number of interface addresses, sockets and contexts
Qemu-cortex-m3 platform ran out of RAM, so reconfigure it to use
* packet size of 256 bytes.
* encode buffer of 2kB
This exercises the block-transferring on some of the test cases.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
* Add support for running interoperability tests with
Qemu X86.
* Remove some debugging messages to allow binary to
fix Qemu Cortex-M3 board.
* Tune buffer and stack sizes to fit all boards.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Do not include the resource type (rt=) in the registration message when
using the OMA JSON format. This was a workaround specifically for the
Wakaama LwM2M server which is no longer needed since the latest master
branch.
Signed-off-by: Marc Lasch <marc.lasch@husqvarnagroup.com>
When working on new test cases for checksum_offload test suite it turned
out that some existing test cases were already broken and not testing
what expected. This commit fixes the broken functionality:
* Despite having two separate interfaces for offloaded and
non-offloaded checksum scenario, all packets ended up in a single
interface anyway due to src address matching. Therefore use
different destination address, depending on tests.
* Add separate semaphores for offloaded and non-offloaded case, to
ensure that the packet ended up on the correct interface.
* The packet loopback in RX cases was broken, the LL address, IP
address and UDP port swap written data in wrong places.
* The receive path was not tested in the offloaded case.
Additionally, do a small cleanup before adding more tests:
* Fix net_context leak.
* Configure IPv6 neighbor once, during setup.
* Add before function to cleanup the flags before tests execute.
* Split tests into separate test cases, as they're not really
dependent on each other.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The optlen parameter passed to getsockopt() should be of (socklen_t *)
type. Using int produced build errors on 64 bit platforms.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Recently added tests require more stack on certain platforms
(nrf52840dk_nrf52840 in this case), hence increase the ZTEST stack size.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
