This adds tests that validate the implementation handles invalid length
Control Point operations.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Update BTP_ASCS_CONFIGURE_CODEC to send codec specific configuration
in LTV format.
Update parameters of BTP_ASCS_CONFIGURE_QOS to match the BT spec
defined lengths.
Signed-off-by: Magdalena Kasenberg <magdalena.kasenberg@codecoup.pl>
Use the minimum supported cis_offset_min considering that
ACL radio event does not overlap with CIG event. Use the
calculated maximum of local and remote cis_offset_min in the
Response PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
MISRA Rule 5.7 requires uniqueness of tag identifiers. Shell is
frequently problematic because many code uses `const struct shell
*shell`. This causes CI noise every time one of these shell files is
edited, so let's update all of them with `const struct shell *sh`
instead.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
As both C and C++ standards require applications running under an OS to
return 'int', adapt that for Zephyr to align with those standard. This also
eliminates errors when building with clang when not using -ffreestanding,
and reduces the need for compiler flags to silence warnings for both clang
and gcc.
Most of these changes were automated using coccinelle with the following
script:
@@
@@
- void
+ int
main(...) {
...
- return;
+ return 0;
...
}
Approximately 40 files had to be edited by hand as coccinelle was unable to
fix them.
Signed-off-by: Keith Packard <keithp@keithp.com>
-- Unit test to check that the correct payload number is selected based
on the SDU packet number and the time stamp when fragmenting SDUs
into PDUs.
-- Ran clang-format on isoal_test_tx and isoal_test_rx
Signed-off-by: Nirosharn Amarasinghe <niag@demant.com>
Many areas of Zephyr divide and round up without using the DIV_ROUND_UP
macro. Make use of it, so that we make use of a tested system macro and
at the same time we make code more readable.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Since behavior of CONFIG_LOG_DEFAULT_LEVEL was changed, if set to debug
level, causes stack overflow on nrf52 board.
Signed-off-by: Magdalena Kasenberg <magdalena.kasenberg@codecoup.pl>
This adds test_mocks_reset function to be called after test case
preamble. The motivation is to reset the function call state that might
be affected by steps perfromed in the preamble stage, which is not the
code under test.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The iso_server shall be not set to NULL in mock_bt_iso_cleanup(), as
it's UUT responsibility to call bt_iso_server_unregister(). Cleaning
the iso_server in mock_bt_iso_cleanup() might hide bug in the code.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Remove qemu_cortex_m3 from various bluetooth tests and samples since
they enable NVS which requires CONFIG_FLASH_PAGE_LAYOUT which is
not supported on qemu_cortex_m3 since there is no flash driver.
We get build failures with the arm-clang compiler because nvs.c
is referencing z_impl_flash_get_page_info_by_offs which does not
exist.
Switch to qemu_x86 as the integration_platforms if it was
qemu_cortex_m3 before.
Removed the bluetooth.mesh.mesh_shell.reduced_legacy as this was
added specifically for building on qemu_cortex_m3.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Support for tests that use ASCS operations Codec Config, Config QOS,
Enable, Disable, Update Metadata, Release.
Signed-off-by: Magdalena Kasenberg <magdalena.kasenberg@codecoup.pl>
This adds new hidden compilation flags that indicate whether the
implementation is configured to be able to receive/transmit audio data.
The flags are profile agnostic to loosen dependencies between
modules/services.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
There is no requirement that HRS shall be on a peripheral device
as far as I can tell, and as such the device with HRS may not
be a GAP Broadcaster. Guards the advertising with
CONFIG_BT_BROADCASTER.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Default BT_BUF_ACL_RX_SIZE value varies based on selected host options.
Many buffers size (L2CAP COC MPS in particular) depends on that value
and those may affect qualification test cases steps.
To make core tests more predictable just use fixed values big enough to
comply with all configurations requirements.
This was affecting L2CAP/COS/ECFC/BV-04-C.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
This commit adds new API functions for AICS
Setting automatic/manual only gain modes
Setting mute disabled
Use new functions in btp.vcp
Signed-off-by: Szymon Czapracki <szymon.czapracki@codecoup.pl>
Some peripheral tests are failing if CONFIG_BT_EXT_ADV=n.
That was previously implicitly enabled by MESH but it has
dedicated overlay.
Affected tests:
GAP/BROB/BCST/BV-03-C
GAP/CONN/UCON/BV-06-C
GAP/PRIV/CONN/BV-10-C
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
This adds ASE_ID getter function to be used in the tests. The function
performs read operation on ASE charateristic. The characteristic value
is ensured to be ASE Idle state characterisitic value, which carries
information about ASE_ID value.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This refactors the function used to get the ASE for the tests.
Reworked function allows to get several ASE's for the test with a single
function call.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This cleans up the code by moving the ASE State Machine transition
test cases to separate source file.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Key size validation was missing on getting local database which
resulted in selecting invalid characteristic by PTS for key size
validation tests.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
This adds basic functionality that mocks the k_work API. The ASCS uses
delayed work to defer the CIS disconnection.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This adds ISO mock with very basic functionality that is needed to mock
the `bt_iso_` functions used by ASCS.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This moves the ISO server registration to bt_ascs_init.
When the ASCS gets cleaned up (the callbacks are unregistered), the ISO
server gets unregistered.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This fixes invalid Unsupported Opcode Response_Code that
happened to be sent in ASE Control Point notification
as the response to operation initiated with Mandatory opcode
to support.
When the Unicast Server callbacks are not registered, every
operation that is initiated by client will fail with
Unspecified Error instead.
Fixes: #56139
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This adds cleanup of ASCS that is called when upper layer unregisters
it's callbacks. Without callbacks registered, the service is unusable.
The ASE's that were in non-idle state stay in this state, because the
implementation returns an error on every operation that is performed by
the client. The cleanup added moves all the ASE's to idle state.
Fixes: #56111
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This tests functions accessible from blob_io_flash via `bt_mesh_blob_io`
object. Whole partition of slot1 is filled with test data using
flash_map API and then read using blob_io_flash, by reading it as blocks
and chunks. `chunk_wr` is tested my writing sample data of size of slot1
partition and checked if each chunk is written correctly, and if whole
partition is filled with correct data at the end. Both of these test
use `bt_mesh_blob_io_flash_init` and `io_open` to prepare stream and
call `block_start` at every new block to check if flash is prepared
correctly.
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
This commit moves app from /tests/bluetooth/mesh to
tests/bluetooth/mesh/basic. This allows to reuse /tests/bluetooth/mesh
directory as location for more tests.
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
This command allows for more predictable GATT database changed tests
and allows to reduce custom test configurations from autopts.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Initially I was hoping we can avoid dedicated overlays and have all
config options enabled but it turned out that built-in services
may affect other tests (especially core related like GAP and GATT).
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Previously tests were passing only because initial value in
database and PTS value used for testing had same length.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
This fixes merge conflict issue by adding missing function
parameters that were introduced in
57784df5f0.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
