Added a new header file bap_lc3_preset.h which contains
the definitions of the LC3 (pre)sets defined by the
BAP spec.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Rename the bt_audio_unicast_client API to bt_bap_unicast_client
and move the API to bap.h
Also adds the _bap_ infix to the bt_unicast_client functions.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Rename the bt_audio_audio_server API to bt_bap_unicast_server
and move API to bap.h.
This also adds the _bap_ infix for bt_unicast_server.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Use different simulation id for mesh-1.1 tests so that they don't
overwrite log files from 1.0.1 tests.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
This is done to guarantee delivery of an unsegmented message from a
regular node to a friend node.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Fix scan window value corruption due to modification of
stored ticks_window value when enabling continuous scan.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Removes the unused pac_pache from the unicast_client.
This moves the storing of the PAC records (in the form of
struct bt_codec) from the stack to the upper layers.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
There were several cases of write requests where we should
wait for the g_write_complete value to ensure that the write
request has completed.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This adds commands to advertise Solicitation PDUs, configure
On-Demand Private Proxy and manage Solicitation PDU RPL.
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
* Test that the Large Composition Data server can send a max access
payload metadata status message.
* Test that the Large Composition Data client can request large chunks
of metadata from the server, and correctly merge samples.
* Refactoring of existing LCD tests.
Signed-off-by: Stine Akredalen <stine.akredalen@nordicsemi.no>
- Add entry for client and server in composition data.
- Add Client commands to aggregate and send messages.
MESH/SR/AGG/BV-02-C requires more key slots.
Co-authored-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Add test that sends longest possible PDU with slowest possible timings
and default retransmission values.
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Test that a maximum length SDU can be processed with SAR
with "stressed" transmitter and receiver configurations.
Signed-off-by: Stine Akredalen <stine.akredalen@nordicsemi.no>
Add Transport SAR Configuration models to shell.
Co-authored-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Add support for:
- SAR Configuration Client and Server models
- Transport SAR configuration states
- Using SAR Transmitter/Receiver states in segmentation
and reassembly process.
Bsim tests fixes:
- Fix failing replay attack test. The replay attack test doesn't
consider retransmission attempts at the transport layer. When
retransmission happens, SeqNums get increased and the test logic
doesn't work anymore. The simplest fix would be to disable
retransmissions at the transport layer.
- Add device synchronization API to synchronize transport va test.
Device configuration may take different time on transmitter and
receiver. Add synchronisation barrier between devices.
- Fix msg_frnd test. Timing in transport sar behavior has been
changed, which affected test_friend_msg test. Now acknowledgments
are sent much faster and this needs to be considered in the test.
- Fix unicast_low_lat test. Increase number of retransmission
attempts when long segmented message is sent.
- Reduce timeout in kr_old_key test.
- Relax SAR RX state configuration in DFU and BLOB tests.
Co-authored-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Co-authored-by: Anders Storrø <anders.storro@nordicsemi.no>
Co-authored-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
- Adds Large Comp Data Server and Client
- Defines some dummy metadata for Health Server
Co-authored-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Test Dev Key Refresh, Node Composition Refresh and Node Address Refresh
procedures for robutness.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Adds commands in the mesh shell for remote provisioning client
operation, including scanning, provisioning and reprovisioning.
Co-authored-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Adds remote provisioning models rpr_srv and rpr_cli, and exposes them as
a bearer for the provisioning process.
The remote provisioning models provide the following features:
- Remote provisioning of new devices, using a remote provisioning server
as a proxy.
- Reprovisioning of existing devices, generating a new device key and
changing addresses and composition data.
Co-authored-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Co-authored-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
This commit adds several BabbleSim tests for BLOB transfer:
- A sanity test checking that BLOB Transfer completes successfully in
both, Push and Pull modes that runs transfer for 4 targets
- blob_cli_trans_resume test for Pull mode
- Test checking that BLOB client continues BLOB transfer if one of
targets times out while sending chunks.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Add a test where distributor is a single target and performs self
update. Add a test where distributor performs self update with multiple
targets.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Check that DFU client continues DFU procedure as long as there is at
least one active target.
Co-authored-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
- Tests that BLOB Client suspends if no target responds to Block get.
- Tests that BLOB Client transfer ends if no target responds to Xfer
get.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Tests that BLOB Client continues the Push BLOB Transfer procedure
as long as there is at least one active target.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
This commit implements the following tests:
- Test that DFU finishes successfully with all different effects;
- Test that DFU fails at confirm step with all different effects;
Co-authored-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Add bsim test for resuming push & pull mode transfer on the BLOB client
after BLOB server has been suspended during initial attempt.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
This updates some of the defaults in the mesh shell's config to allow
various Mesh 1.1 models to be used in the shell.
EPA provisioning and DFU requires much larger multisegment messages,
therefore support for maximum sized message is enabled by default and
stack sizes are increased working values.
Additionally, log buffer is increased and thread sleep time is reduced
to avoid dropping of useful logs.
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Adds conditional support for the BLOB and DFU models in the mesh shell.
Additionally creates a dummy BLOB stream for testing.
Co-authored-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Co-authored-by: Anders Storrø <anders.storro@nordicsemi.no>
Co-authored-by: Ludvig Samuelsen Jordet <ludvig.jordet@nordicsemi.no>
Co-authored-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Co-authored-by: Mia Koen <mia.koen@nordicsemi.no>
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Implementation of the enhanced provisioning authentication (EPA)
that is based on SHA256 and HMAC security algorithms.
OOB authentication mandates EPA usage.
Co-authored-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Add ability to run bsim mesh for both ble mesh versions
v1.0.1 and v1.1
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Default config should have all bells and whistles enabled to minimize
number of overlays needed in autopts.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
When possible re-use the already allocated RX node for notifications.
Store (retain) RX node and Link element on RX if NTF could occur.
Pass link element to LLCP (ull_cp_rx()) together with RX node.
New RX node type RETAIN introduced to signal retention
When no RX node is available allocate one and hold off TX on procedures
until such time that a node is available for NTF.
In case waiting for NTF buffer avail is needed, allocate and store TX
node to use for TX once NTF becomes available.
CIS Established (incl. timeout handling) is now handled entirely as a
specific event driven by ull_conn_iso - ie removal of procedure check
of cis->established and cis->expire, as this is doubling mechanism
in the conn_iso context.
Unit test and helpers updated to handle new node type.
Function ull_cp_release_ntf() was used only in unit test, so moved to
helper context.
Updating release_ntf to handle the fact that with piggy-backing in test
context the node used for NTF can be from two different memory pools
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
