This reverts commit b56297bf16
because it is causing problems when using native_sim and not
having CONFIG_POSIX_API set.
The proper fix is to set CONFIG_POSIX_API when using eventfd
and native_sim so that picolibc is used instead of host libc.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
According to RFC3927 and RFC5227, an ARP probe target HW address should
be set to all-zeroes:
"The 'target hardware address' field is ignored and
SHOULD be set to all zeroes."
Hence, we should allow the ARP probes to have all-zeroes target HW
address as well.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
implement a2dp.c and avdtp.c
add a2dp related Kconfig:
BT_AVDTP_RTP_VERSION, BT_A2DP_SOURCE and BT_A2DP_SINK
a2dp_codec_sbc.c/h are used to provide some APIs to get
A2DP SBC codec information. (like: channel num).
Signed-off-by: Mark Wang <yichang.wang@nxp.com>
The notify handle in the BAP broadcast assistant did not handle
conn == NULL properly, and neither did delayed_bap_read_handler.
Add better NULL checks, which also fixes a coverity issue.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Increasing the adv latency range to the minimum valid
ReceiveDelay value, 10ms. 4ms might be small for some
target systems.
Signed-off-by: alperen sener <alperen.sener@nordicsemi.no>
Add APIs for changing the contents of modem chat matches
safely at runtime.
This allows for reusing a single modem_chat_match at the cost
of placing the match and its buffers in RAM.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
In order to prevent index out of bounds access of the sh->ctx->cmd_buff
array when sh->ctx->cmd_buff_pos is 0, it has been added a check for the
value of sh->ctx->cmd_buff_pos.
This ensures that the array will not be accessed beyond its boundaries.
Signed-off-by: Jungo Lin <jungolin.tw@gmail.com>
If CDC ACM uart side has TX enabled when the configuration gets enabled,
depending on fifo state following has to happen:
* if the fifo is empty - trigger TX ready interrupt
* if the fifo is not empty - queue TX data on IN endpoint
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Commit 2f31ee63b5 ("usb: device_next: convert ASCII7 strings to
UTF16LE on the fly") made string descriptors respond with twice as much
of the actual string data.
Fix the issue by taking into account that USB string descriptor length
is already multiplied by two. Additionally, make it possible to return
odd number of bytes if host requested so.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
The socket allocation count was incorrectly calculated as
we have only one socket per listened port.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If DNS_EAI_ALLDONE is returned, it indicates that the request
was done and should not be considered an error.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
pm_system_resume() can be called directly from ISR and because of this
devices should be resumed before calling pm_state_exit_post_ops().
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
There is no need to this function be defined inside the kernel since
all places using it are protecting the call under ifdef PM guards.
This way we can also remove the ifdef condition inside the implementation.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This allows a customized coredump_backend_other API to re-use the
COREDUMP_*_STR without re-defining the same strings.
Signed-off-by: Younghyun Park <younghyunpark@google.com>
The BR Keys cannot be scanned by function
bt_foreach_bond.
Add function bt_foreach_bond_br for br.
The function bt_foreach_bond_br will be
called by bt_foreach_bond if the BR is
enabled.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
Implement a function bt_audio_get_chan_count that takes an enum
bt_audio_location and returns the number of channels in that value.
This PR fixes#69617
(https://github.com/zephyrproject-rtos/zephyr/issues/69617)
Signed-off-by: Babak Arisian <bbaa@demant.com>
Get the preferred QoS settings via bt_bap_ep_get_info()
Therefore no need to use the internal header file to get it.
This PR fixes https://github.com/zephyrproject-rtos/zephyr/issues/72359
Signed-off-by: Ping Wang <pinw@demant.com>
In some relatively rare conditions, the DFU detach/attach happens to
fast, which cause the host to not notice it. It seems to to be the case
for instance on STM32 when no endpoint are being used.
Adding a 1 ms delay (i.e. one SOF period) between the detach and the
attach fixes the issue.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Allocate the GPIOTE channels that the Bluetooth Controller needs to use
with the dedicated function provided by the nrfx_gpiote driver instead
of using hard-coded indexes of these channels, as now, when the driver
supports multiple GPIOTE instances, it would be much more difficult to
properly inform the driver which channels should be reserved.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The BIG handle for an ISO sync receiver is provided by the host. The
valid range is [0x00..0xEF], and this requires the controller to allow
non-consecutive handle numbering. This means that even if only one sync
set is supported, a BIG handle of ex. value 2 must be supported.
As the code uses indexing and range checking directly by handle, this
needs to be changed. Introducing the handle index, which sequnces the
handles such that index = 0 is always the "first handle", regardless
of value.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Instead of selecting legacy MBEDTLS symbols, use corresponding
PSA_WANT ones when possible (note: some legacy symbols do not
have a PSA correspondance).
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Now that support for all PSA_WANT symbols is in place, we can
enable MBEDTLS_USE_PSA_CRYPTO when MBEDTLS_PSA_CRYPTO_C is
enabled as well.
Note: this commit also moves USE_PSA_CRYPTO out of CRYPTO_C
dependency in config-tls-generic.h because TLS/DTLS/X509 modules
of MbedTLS can rely on *any* implementation of PSA crypto APIs
not only the MbedTLS one. TFM is for example an alternative
to this.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Current on x86 & risc-v that implement stack trace, the
maximum depth of the stack trace is defined by a macro.
Introduce a new Kconfig:EXCEPTION_STACK_TRACE_MAX_FRAMES
so that this is configurable in software.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Selecting `CONFIG_EXCEPTION_STACK_TRACE_SYMTAB` will
enable the symtab generation which will be used in the
stack trace to print the function name of the return
address.
Updated the `stack_unwind` test to test the symbols in a
stack trace.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Use pyelftools to extract the symbol table from the
link stage executable. Then, filter out the function names
and sort them based on their offsets before writing into the
`symtab.c`, this is similar to how the `isr_tables` works.
To access the structure, simply include the new header:
```c
#include <zephyr/debug/symtab.h>
```
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
This commit is to fix a warning which is reported in Coverity scan
after device runtime pm is enabled.
Signed-off-by: Roger Wang <roger1.wang@intel.com>
When the interface goes down, the safest thing to do is to return to
the INIT state, as there is no guarantee that any state is preserved
upon the interface coming back up again.
This is particularly the case with WiFi.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Support for using Link Time Optimization (LTO) when
building application with open source Bluetooth Low
Energy Controller. This reduces code space usage.
Current Memory Usage at the time of this PR (hci_ipc):
BT_CTLR_OPTIMIZE_FOR_SPEED:
Memory region Used Size Region Size %age Used
FLASH: 260112 B 256 KB 99.22%
RAM: 60136 B 64 KB 91.76%
SRAM1: 0 B 64 KB 0.00%
IDT_LIST: 0 B 32 KB 0.00%
BT_CTLR_OPTIMIZE_FOR_SIZE:
Memory region Used Size Region Size %age Used
FLASH: 232292 B 256 KB 88.61%
RAM: 60128 B 64 KB 91.75%
SRAM1: 0 B 64 KB 0.00%
IDT_LIST: 0 B 32 KB 0.00%
BT_CTLR_OPTIMIZE_FOR_APP_DEFAULT:
Memory region Used Size Region Size %age Used
FLASH: 232292 B 256 KB 88.61%
RAM: 60128 B 64 KB 91.75%
SRAM1: 0 B 64 KB 0.00%
IDT_LIST: 0 B 32 KB 0.00%
BT_CTLR_LTO:
Memory region Used Size Region Size %age Used
FLASH: 221484 B 256 KB 84.49%
RAM: 60120 B 64 KB 91.74%
SRAM1: 0 B 64 KB 0.00%
IDT_LIST: 0 B 32 KB 0.00%
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Remove legacy LL optimize for speed dependency required to
support encryption feature in Controller where crypto was
performed in highest priority ISRs to setup encryption in 3
radio events (this now requires 5 radio events in split LL).
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
There's such a case captured. When log immediate mode is enabled, each log
message is output per character. However, "log_output_flush()" function is
still called with zero data length at the end of "log_output_process()".
Better to make "buffer_write()" returns immediatley if buffer data
length is zero.
Signed-off-by: Dong Wang <dong.d.wang@intel.com>
If time aware system has more than 1 gptp port, because there is only
one boolean to handle callback registering, a race condition can occur
for instance in case 2 master ports are waiting for a timestamp following
sending of sync message. More in details, callback may be unregistered
by port 1 while port 2 is waiting for timestamp event.
The issue is solved by declaring as much as boolean and struct
net_if_timestamp_cb as the number of declared ports
(=CONFIG_NET_GPTP_NUM_PORTS).
Signed-off-by: Jean-Nicolas Graux <jean-nicolas.graux@st.com>
Setting a ration of 0 breaks the computation of scaled_rate_offset
in gptp_md_follow_up_prepare().
According to IEEE802.1AS 10.2.2.3.9, when sent by clock master
entity, rate_ratio shall be equal to gmRateRatio. But since
in gptp_md_follow_up_prepare(), in case we are the grand master
clock, we take the assumption that clock source is the local clock,
we may set this ratio to 1.0.
Signed-off-by: Jean-Nicolas Graux <jean-nicolas.graux@st.com>
Without this patch, in case time aware system is grand master capable
but is not the grand master clock and behave as a bridge so that it
shall ONLY relay SYNC and FUP messages from slave port to master port(s),
SYNC and FUP are mistakenly generated by ClockMasterSyncSend state
machine.
This patch only call ClockMasterSyncSend state machine in case a Grand
Master clock is present and is this time aware system.
This check is not described by IEEE802.1AS. Instead, according to
10.2.9.3, the SiteSyncSync state machine shall not take into account
information from ClockMasterSyncSend in case this time aware system is
not grand-master capable. Current implementation of ClockMasterSyncSend
state machine sends sync indication to the PortSync entities, instead of
sending it to the SiteSyncSync entity. And the SiteSyncSync state machine
does not make any check.
Signed-off-by: Jean-Nicolas Graux <jean-nicolas.graux@st.com>
Commit 413eceeddb ("net: gptp: fix follow_up message correction_field")
breaks computation of follow up correction field in case time aware system
is not the grand master clock but behave as a transparent clock which relay
sync and follow-up messages from one slave port to one or several master
port(s). In this case, according to IEEE802.AS 11.1.3 and 11.2.14.2.3,
md sync send state machine shall compute the sum of link propagation delay
and residence time, expressed in grand master time base. Then this quantity
shall be added to last received fup correction field to build value of
correction field. This patch checks whether time aware system is the grand
master clock or not, and computes value correction field accordingly.
Signed-off-by: Jean-Nicolas Graux <jean-nicolas.graux@st.com>
An earlier pull request implementing observe support was merged too
hastily. It had a few issues:
1. The predicate for whether a request should be marked not ongoing was
wrong (it checked ret != 0 instead of ret < 0)
2. Without observes in mind, MID-based deduplication is not a required
feature. Deduplication was handled implicitly - the exchange would get
dropped after the first response anyway, so duplicate responses would
not get matched to anything. But with observes, there are several
responses in an exchange. This commit adds this.
3. Using coap_request_is_observe(&internal_req->request) in the response
handler requires the whole request to stay in scope for the lifetime of
the observation, which I observed was not always the case. Adding an
is_observe bool to the internal struct improved stability significantly.
With these fixes, GETs with observe option works very well.
Signed-off-by: Benjamin Lindqvist <benjamin@eub.se>
These are safety checks to guard against silent data corruption. The
implementation currently does not clobber bufs, but soon it will. The
bufs will be zero-copy segmented and fragmented, which involves
overwriting already-sent contents with headers for the next fragment.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Changes the parsing of boolean input parameter "PolicyApply"
to DFD start command to use shell boolean parse library.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
