When initially reading some of the host code it was unclear to me
why they were needed an how they are used.
By adding some documentation,
this can hopefully make it easier for others to understand these.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
The following warning is issued by clang:
warning: field within 'struct gatt_chrc' is less aligned than 'union
gatt_chrc::(anonymous at subsys/bluetooth/host/gatt.c:1859:2)' and
is usually due to 'struct gatt_chrc' being packed, which can lead
to unaligned accesses [-Wunaligned-access]
This is due to the fact that the uint16_t uuid field requires 2-byte
alignment but it is not marked as packed. Since the enclosing struct is
indeed packed, the required alignment is not guaranteed and so clang
complains. Fix it by ensuring that the union is marked as packed too.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The advertiser options to automatically add the name in the scan
response and the advertising data will be deprecated.
The Mesh files `proxy_srv.c` and `pb_gatt_srv.c` were using
BT_LE_ADV_OPT_USE_NAME. Add the device name in the advertising data
directly.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
The advertiser options to automatically add the name in the scan
response and the advertising data will be deprecated.
Update the Bluetooth shell and its documentation to not use those
options anymore.
The option of the legacy advertiser run with `bt advertise` and the
behavior hasn't changed. The code has been updated to no longer use the
advertiser option but the original behavior has been reproduced.
The option of the extended advertiser have been updated to be more
explicit. The options `name` and `name-ad` have been removed from the
`bt adv-create` and `bt adv-param`. The option `name` and `dev-name`
have been added to the `bt adv-data` command.
- `name <str>` will advertise the given name.
- `dev-name` will advertise the device name.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Rework USBD shell to take speed arguments into account and revise
command help text. Rename some of the commands to better reflect what
they actually do.
Since most of the init code changes, rewrite the command to initialize
the default configuration in the shell to register all available
classes, but not to enable USB device support in a single command.
This will allow earlier notification in the future, if supported by the
controller, before the USB device controller is enabled.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
For the last dozen commits, the role of usbd_class_node has actually
been taken over by usbd_class_iter. After cleaning up and merging
usbd_class_node and usbd_class_data, we can rename usbd_class_iter to
usbd_class_node to better reflect its role.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Since only usbd_class_node contains the class instance data, rename it
to usbd_class_data.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
With the latest change, there are two structures that actually contain
class instance related data. Merge them into usbd_class_dnode, because
there is already a handy macro that can be used in class instances.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Some places have been overlooked, finally get rid of it. Use helpers to
get instance priv and device context.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
USB High-Speed devices must be able to operate at both High-Speed and
Full-Speed. The USB specification allows the device to have different
configurations depending on connection speed. Modify the API to reflect
USB Specification requirements on what can (e.g. configurations) and
what cannot (e.g. VID, PID) be speed dependent.
While the class configurations for different speeds are completely
independent, the actual class instances are shared between operating
speeds (because only one speed can be active at a time). Classes are
free to provide different number of interfaces and/or endpoints for
different speeds. The endpoints are assigned for all operating speeds
during initialization.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Introduce usbd_class_iter for keeping endpoint assignment variables
and the single-linked list node. No functional changes right now, but
this paves the way for independent speed specific configurations.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
When device is not configured, any class or endpoint request must result
in request error. Do not try to find transfer owner because there cannot
be one.
Make sure that the actual handling code path does not depend on the
configured log level because it is absolutely not desired for log level
to affect actual handling.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Do not require nil descriptor at the end of descriptor set because it
serves no other purpose than a sentinel. Just end processing on first
NULL pointer within descriptor set.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add necessary macros and convert UAC2 descriptor test from descriptor
blob to descriptor set. Currently there is only Full-Speed descriptor
set.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
For specification-compliant high-speed support, we need to support
device quilifiers and other-speed-configuration descriptor requests. We
also need to store different configurations of the class/function
descriptors, which typically only affect the endpoint descriptors. With
this change, the stack expects class/function descriptors to be passed
as an array of struct usb_desc_header pointers to e.g. interface,
interface-specific, and endpoint descriptors, with the last element of
the array pointing to a nil descriptor. And also passed for a specific
speed, for now we support full and high speed configurations.
During instantiation, the class/function implementation must choose the
correct configuration in the full-speed and high-speed descriptor sets
for values such as maximum packet size and bInterval values of interrupt
and isochronous endpoints.
During initialization, the stack reads the highest speed supported by
the controller and uses it to get the appropriate descriptors set
from the instance. If the controller supports only full speed, the stack
configures the class/function descriptor for full speed only, if the
controller supports high speed, the stack configures the descriptors for
high speed only, and a class/function must update the full speed
descriptor during the init callback processing.
During device operation, the class/function implementation must check
the actual speed of the device and use the correct configuration, such
as the endpoint address or maximum packet size.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Save actual device speed in the device context and add helpers to get
highest supported and actual speed.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The class implementations should not access the members of the struct
usbd_class_node directly.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This implementation is WIP and has mostly been used to test interface
and endpoint configuration by the stack. For future changes, make the
interfaces more compliant with the USB specification.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
If compiling with optimizations (-O2/-Ofast) gcc emits a
maybe-uninitialized warning for `size`.
As far as I can tell, `size` will always be initialized in the cases
where it is used and only left uninitialized in error cases.
Reproduced on main with the multi_endpoint sample on
nrf5340dk/nrf5340/cpuapp.
Signed-off-by: Herman Berget <herman.berget@nordicsemi.no>
When initially reading some of the host code it was unclear
to me why they were needed an how they are used.
By adding some documentation, this can hopefully make it
easier for others to understand these.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Updates the linker script fragments under 'subsys' to use
Z_LINK_ITERABLE_SUBALIGN for the subalignment instead of
a hardcoded value of 4.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
The IPv6 address lifetime timers are kept in a slist, but
the code that adds the entry to the list does not check
whether the item is already in the list. This will cause
problems when trying to remove the address from the list.
Normally this is not causing issues, but if the function
net_if_ipv6_addr_update_lifetime() is called multiple times
before the address expires, then the item was added to the
slist multiple times.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Applications need to run a scan to identify the security
mode before attempting the connection which adds to the time
taken for connection to be established.
To avoid the initial scan, support auto security mode which will
enable STA to choose between WPA, WPA2 and WPA3, based on the
network configuration.
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
In situations, where the address, the port and the auth token of the
hawkbit server are not known during build, it should be possible to set
it during runtime.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
This commit fixes removing indirect blocks (marking them as 0)
in the inode structure. Previous version of the code was removing
the top-level blocks only when the first removed block was
one of the first 12 direct blocks. However, when the first removed
block is the first block in the referenced block list, its parent
(indirect block) should also be removed.
Signed-off-by: Franciszek Pindel <fpindel@antmicro.com>
Since `NONE` is a valid option for key management in `connect`
command, we should remove the part in help text which says:
"valid only for secure SSIDs".
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
UBSan was showing the following error:
```
runtime error: left shift of 137 by 24 places cannot be represented in
type 'int'
```
Cast the value to `uint32_t` to make UBSan happy.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
The comment states the reason for this requirement is to detect
violations by a remote peer. The ATT version of this was removed in
ea04fd95f9. TLDR: It's neither possible
for, nor the job of the host to police the remote device.
We remove this requirement to be more flexible about the number of
priority levels in the system, and to avoid the temptation of using
priorities as a synchronization mechanism.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
The remote domain may send unsolicited Z_LOG_MULTIDOMAIN_ID_DROPPED IPC
messages, which are not handled in log_multidomain_link_on_recv_cb().
With CONFIG_ASSERT=y, this will cause an assertion failure. With asserts
disabled, this message would be treated as a reply to any in progress
request and cause getter_msg_process() to return early. In turn, this
can cause various kinds of memory corruption when the real reply arrives
and the callback reads/writes stack variables that are no longer valid.
Fix this by explicitly ignoring Z_LOG_MULTIDOMAIN_ID_DROPPED, and also
don't treat unrecognized message types as replies.
Signed-off-by: Ben Wolsieffer <benwolsieffer@gmail.com>
This fixes warnings when building with icbmsg
backend for IPC service by defining
_POSIX_C_SOURCE 200809L in source file.
Signed-off-by: Kamil Gawor <Kamil.Gawor@nordicsemi.no>
In hawkbit there are currently a lot of values send to the server, that
are not required or even optional. This commit corrects that.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
This commit change a method of printing multicast routes by showing
all interfaces per entry instead of aggregating them by interface.
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
In order to save memory, a single multicast routing entry now
contains configurable number of network interfaces.
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
This commit adds a check to determine if the packet wasn't already
forwarded to a given interface.
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
