The coap_client lib only handled "one-shot" requests properly. This
patch allows it to keep listening for additional responses to a request,
if the request was made with the CoAP OBSERVE option appended.
An API for canceling such requests is also added.
Signed-off-by: Benjamin Lindqvist <benjamin@eub.se>
The size field in net_buf should not be used directly as then
the optional headroom will not be taken into account.
There is the net_buf_max_len() API that should be used instead.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
When calling bap_broadcast_assistant add_pa_sync, it should only
set the BIS index field as optional parameters and not to whatever
is in the BASE.
If setting BIS index which the BASE does not support, then the
command should be rejected.
This PR fixes https://github.com/zephyrproject-rtos/zephyr/issues/70835
Signed-off-by: Ping Wang <pinw@demant.com>
When calling bap_broadcast_assistant add_pa_sync, it should only
set the BIS index field as optional parameters and not to whatever
is in the BASE.
If setting BIS index which the BASE does not support, then the
command should be rejected.
This PR fixes https://github.com/zephyrproject-rtos/zephyr/issues/70835
Signed-off-by: Ping Wang <pinw@demant.com>
Spell checking tools do not recognize "iff", replace with "if and only if".
See https://en.wikipedia.org/wiki/If_and_only_if
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Kconfig option to enable object version reporting should
be moved into sub section "Engine features" so
it does not clutter up the main LwM2M menu.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Due to recent changes in hostap to move few buffers from heap->stack (to
improve the reliability of allocations) this has increased the stack
size and with another recent change to increase the max polling sockets
this puts over the 4096 stack size for net_mgmt causing stack overflow.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The bcdUSB value 0x0210 defined in USB 3.2 Specification indicates USB
3.2 device operating in one of the USB 2.0 modes. USB 2.0 Link Power
Management Addendum defines bcdUSB value 0x0201 to indicate that USB 2.0
device supports the request to read the BOS Descriptor.
The main difference between bcdUSB 0x0210 and 0x0201 is that the USB 3.2
device must support LPM, while USB 2.0 devices can (but are not required
to) support LPM.
The difference is respected by USB 3 Gen X Command Verifier (2.3.0.0)
Chapter 9 Tests [USB 2 devices], where the test behaves as follows:
* For bcdUSB 0x0200:
Checking Device Under Test for LPM L1 Compatibility...
USB version of device is 2.00.
DUT is NOT compatible with LPM.
LPM is NOT required for DUT
LPM is only supported in USB version 2.01 and above.
* For bcdUSB 0x0201:
Checking Device Under Test for LPM L1 Compatibility...
USB version of device is 2.01.
DUT IS compatible with LPM.
LPM is NOT required for DUT
USB 2.0 Extension Descriptor bmAttributes:
LPM Capable = 0
BESL and Alternate HIRD Supported = 0
Baseline BESL Valid = 0
Deep BESL Valid = 0
Baseline BESL: 0d
Deep BESL: 0d
LPM is not supported
* For bcdUSB 0x0210:
Checking Device Under Test for LPM L1 Compatibility...
USB version of device is 2.10.
DUT IS compatible with LPM.
LPM IS required for DUT
USB 2.0 Extension Descriptor bmAttributes:
LPM Capable = 0
BESL and Alternate HIRD Supported = 0
Baseline BESL Valid = 0
Deep BESL Valid = 0
Baseline BESL: 0d
Deep BESL: 0d
(USB: 9.6.2.1.6) Bit 1 in Attributes field of a USB 2.0 Extension
descriptor returned in response to a GetDescriptor(BOS) request
must be 1 for LS/FS/HS devices that support LPM L1.
The test fails when LPM bit is not set in USB 2.0 Extension Descriptor
only when bcdUSB is 0x0210. The test failure was incorrectly fixed in
commit 312429be3c ("usb: samples: Add Extension descriptor to webUSB
sample."). Properly fix the issue by changing bcdUSB to 0x0201 and
removing the false LPM support claim.
The false LPM claim was leading to device ceasing to work after some
time if there was no traffic from host to device (when the host is
likely to have executed the LPM L1 transition that was not properly
handled by the device).
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
When PPP moves to the 'Closing' state it sends up to configured number
of 'Terminate-Request' packets. It only moves to the 'Initial' state,
after running out of retransmits or when it receives a 'Terminate-Ack'
packet.
Signed-off-by: Markus Lassila <markus.lassila@nordicsemi.no>
The bt_cap_common_discover function relied on a global variable
used to indicate that a discovery was in process.
This global variable prevented multiple discoveries to take place
on multiple ACL connections, where the intention was to stop
multiple discoveries on the same ACL.
This has been fixed by moving the variable into the
struct bt_cap_common_client, so that it applies per
connection, rather than a global check.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Moved the busy flag and the GATT paramters to the
individual CSIP Set Coordinator instances.
This allows to use multiple instances in parallel,
and thus in turn allow CAP to do things in parallel.
This commit has been done with minimal amount of changes,
even if there are multiple pieces of code that could likely
be refactored to be better.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Callback was always called with NULL conn. Now it is called with proper
pointer or NULL conforming to description.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
As documented in bt_le_scan_update(), the host may start scanning
automatically for various reasons.
Until now scanning was only done on 1M PHY, making it impossible
to use auto-connect/sync establishment if the advertiser was using
Coded PHY as its primary PHY.
Auto-connection would never work. Sync establishment would work if
the scanner was started by the application.
This commit fixes this by instructing the controller to scan on
both 1M and Coded PHY if the controller supports Coded PHY.
The application may see increased power consumption as a result
of this change as the controller may now spend 2*scan_window
listening for advertising packets.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Add channels mask configuration for LoRaWAN, creating a request for
LoRaMAC. This change is needed because using LoRaWAN with ABP
activation without configuring channels mask will provide no acceptable
channels on data transmit, causing data loss.
Signed-off-by: Jeferson Fernando <jeferson.santos@edge.ufal.br>
1) Replace master/slave in API for new terms in eSPI spec 1.5
2) Reflect eSPI VW change and macro changes across eSPI drivers
3) Update terms in eSPI driver sample and eSPI test driver
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
This patch adds names to the threads created by `mbox_init` via
`k_work_queue_start`. The name of the thread is the same as the name in
the device instance.
The main reason for this has to do with how `mcumgr` reports [thread
information](https://docs.zephyrproject.org/latest/services/device_mgmt/smp_groups/smp_group_0.html#task-statistics-command).
Specifically, data about threads is sent in a CBOR encoded map where the
map keys are the thread names (at least in the default configuration). If
there's more than one IPC channel defined (one example of this being
`samples/subsys/logging/multidomain`), both threads would be created
with an empty name and `mcumgr` will only return the data associated
with the thread created by the last call to `mbox_init`.
Signed-off-by: Bogdan Marinescu <bogdan.marinescu@gmail.com>
This service receives fragmented data (usually firmware images) and
stores them in the slot1_partition in the flash.
Also update CMakeLists.txt in loramac-node module to be able to use
FragDecoder.c
Signed-off-by: Martin Jäger <martin@libre.solar>
Use reschedule margin as minimum ticks_slot when ticker with
reschedule expires. This will ensure not too many unreserved
tickers expire in close proximity that can lead of pile up
of CPU processing time and eventually causing timeout
callbacks to be delayed. This mitigate possible LL asserts
due to overhead in start of radio events.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Enable use of ticker slow window yield feature under mesh
usecase. This is make sure scan window either slides within
is window or skips to next interval so that it does not
lead to advertising event being skipped.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix short prepare preempt timeout start, such that if there
are any normal prepare before a short prepare in the
pipeline, then find the short prepare and start its preempt
timeout.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add prepare pipeline assertion checks to detect faults
like stopping preempt timeout without prior start. Also,
check if the preemptor param is correct when preemption
is performed. Check that the prepare pipeline is not
infinitely looping.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add assertion check for use of scan aux context so that
scan aux context is not assigned again while there is
already an existing LLL scheduling in use by the scan
context.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix BT_CTLR_EARLY_ABORT_PREVIOUS_PREPARE to setup new
shorter preempt timeout irrespective of whether there
is a previous prepare enqueued in the prepare pipeline.
Relates to commit d573951f0d ("Bluetooth: Controller:
Revert back early abort of previous prepare").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
After the changes introduced by #50816 the UpdateHub could not decode
anymore the JSON object. This introduce missing parsing definitions
to allow JSON parser undertood the correct UpdateHub probe object.
Fixes#69297
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
The lorawan subsystem do not use settings handler, and instead uses
individual calls to settings_save_one(). With this strategy there is no
need to call settings_save() at the end.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When running multiple subsystems or applications on a MCU, the usual
strategy is to use different settings subtrees.
The API provides a way to load or commit a subtree, to avoid adding
dependencies between subsystems or applications, but lacks the way to
save a subtree only. Fix that by adding a settings_save_subtree()
function.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This commit updates models metadata API to simplify the usage and
removes the metadata pointer in health server model context.
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
Add an extra "usage=%d" to the device status to show the current usage
counter when PM runtime is enabled.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Add a shell_device_filter variant of the shell device lookup helper that
takes a callback as an argument. This allows more complex filtering on
the device than the existing name prefix.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
When in the BAP unicast server role, at least PAC sink
or PAC source shall be set.
In order to fulfill this new requirement, a few other Kconfig
options had to be changed to a `depends on` from `select` to
avoid recursive Kconfig requirements. This change may require
some applications to update their configurations according
to the migration guide.
The change from `select` to `depends on` is ideal anyhow
as that is the recommended way to add dependencies.
This can checked via the combined BT_PACS Kconfig value.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Original code developed as a GSoC 2023 project by Emna Rekik.
Code refactored in order to provide better bisectability
as the origical commits were not bisectable.
The server supports static and dynamic resources, managed by
HTTP_SERVICE/HTTP_RESOURCE macros.
Fixes#59685Fixes#59686Fixes#59688Fixes#59690Fixes#59670Fixes#59700Fixes#59684Fixes#59693Fixes#59693Fixes#59694Fixes#59699Fixes#59696Fixes#59688Fixes#59690Fixes#59670Fixes#59700Fixes#59685Fixes#59686Fixes#59688Fixes#59691
Signed-off-by: Emna Rekik <emna.rekik007@gmail.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add HTTP/2 helper libraries to encode and decode HPACK encoded headers,
according to RFC7541.
HPACK string encoding requires to support certain set of Huffman codes,
therefore implement Huffman encoder/decoder as well.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When building ISO applications on a device that has the host
and controller on the same core, the application developer
shouldn't have to set controller specific configurations.
Without this change the samples iso_receive and iso_broadcast
will fail to run on NRF52 series devices as the samples
try to set up two streams but the controller is configured
to support only one.
Controller unit tests that were previously only enabling the
controller specific ISO configurations now also enable the
top-level ISO configurations to ensure that the default
stream count is properly configured.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
In case of successful submission, the reference shouldn't be put down,
this only should done on error cases.
As reference is put down on success, during the buffer unref, no action
is taken due to an uint8 overflow (ref is now 255), so, the buf->frags
isn't cleared properly and the next time the frags is used and when L2
inserts a second frag, the first head frag and next frag are same (due
to buffer re-use) causing an infinite loop in either net_buf_frag_last
or net_pkt_get_len.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
We can't enable device runtime power management in a device that is
set busy since it may suspend this device.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
