USB controller was performing the fragmentation by itself and the driver
was not aware if current chunk is the last one if data size is equal to
maximum chunk size. Some hardware controllers (i.e. in nRF52840) handle
the status stage by hardware which must be triggered after the last data
chunk.
Currently, the whole remaining data is passed to the driver, and the
driver decides whether to fragment the data internally, or send only
the chunk and report back to the stack.
Signed-off-by: Paweł Zadrożniak <pawel.zadrozniak@nordicsemi.no>
This commit fixes the issue that if a thread is waiting on recv for
data and the user closes the socket, the waiting thread is not
unblocked.
Signed-off-by: Léonard Bise <leonard.bise@gmail.com>
This commit adds missed const modifier for addr pointer for
bt_le_set_auto_conn function
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
Rename log level variable:
CONFIG_LOG_IMG_MANAGER_LEVEL to CONFIG_IMG_MANAGER_LOG_LEVEL
Use template for log levels.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Refactored the fix in the commit 685da02354 ("Bluetooth:
controller: Fix advertising random delay resolution calc")
to apply modulo in tick units before adding a tick.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix bluetooth config dependencies where the definitions depend on other
definitions.
BT_RX_PRIO is not always defined in a controller only build.
BT_CTLR_TX_BUFFER_SIZE does not depend on BT_CTLR, but BT_LL_SW.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This header is private data and we shouldn't (and aren't) using it in
the tracing_sysview.h. SystemView tracing works fine without it, as
tested with the philosophers sample.
This commit fixes the build when bluetooth SMP and SystemView tracing
are used, because the kernel_structs.h inclusion ends up pulling in
kernel_internal.h, which declares smp_init(), whose declaration
conflicts with another internal routine by the same name in
subsys/bluetooth/host/smp.c.
Signed-off-by: Marti Bolivar <marti@foundries.io>
The wifi management interface was still using one SYS_LOG_DBG
macro call, replacing that with NET_DBG.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Adding spaces around "=" when definining Kconfig template so
that is more consistent with overall style of these template
variables.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Calling bt_recv in the Bluetooth host Tx thread by the
controller implementation caused deadlock in combined host
controller builds when HCI LE Create Connection Cancel
generated the HCI LE Connection Complete or HCI LE Enhanced
Connection Complete events.
Controller's HCI implementation has been updated to place
the generated event into Rx FIFO to avoid the deadlock.
Relates to commit a59f544fb4 ("bluetooth: controller:
Handle non-priority events correctly")
Relates to #10314.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
bt_conn_disconnect removes device from autoconnect list and thus
should not be called from le_conn_update when timeouting pending
connection. Also auto connect flag needs to be check on connection
failure to make sure scan is restarted.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
In commit d5836195d7 ("Bluetooth: controller: Increase advertising
random delay resolution"), the resolution of random_delay was
increased from 8-bit to 16-bit. Due to this switch the result
of HAL_TICKER_US_TO_TICKS() can now be a 0, which causes the following
crash:
***** Kernel OOPS! *****
Current thread ID = 0x200043f0
Faulting instruction address = 0x17914
Fatal fault in ISR! Spinning...
Let's make sure we don't pass a 0 to ticker_update() by increasing
the result of HAL_TICKER_US_TO_TICKS() by 1.
Signed-off-by: Michael Scott <mike@foundries.io>
Added functionality to enable active shell backends via Kconfig
file. When there will be more backends implemented user will
have an option to select only required ones.
It is no longer needed to select SERIAL in prj.conf.
Fixes#10190
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
As the debugging print calls are async, all the strings that might
be overwritten must use log_strdup() which will create a copy
of the printable string.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The code was trying to print peer IP address string but that
pointer could contain garbage. There is actually no need to print
anything in this case, the error code return is enough.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Currently logging subsystem supports quite small number of function
parameters. So split some long functions into smaller pieces.
Hopefully this is just a temporary patch and we can support more
parameters to logging macros.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of one global log level option and one on/off boolean
config option / module, this commit creates one log level option
for each module. This simplifies the logging as it is now possible
to enable different level of debugging output for each network
module individually.
The commit also converts the code to use the new logger
instead of the old sys_log.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fix the default Tx buffers to 3. While the first Tx-ed
buffer generates the HCI Number of Completed Packets Event,
the controller needs to have 2 additional Tx buffers queued
so that the second Tx PDU has the More Data (MD) bit set so
as to have the connection event to continue to transmit any
additional Tx buffers that the Host will enqueue in the same
connection event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Before going further for API refactoring in console subsys, makes
sense to split "tty" implementation from "console" implementation,
to make it clearer that "console" is just a "tty" instantiated on
a particular UART device.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The string parameter needs to be const as otherwise calling this
function using a const string pointer will lead to a warning.
Besides the function does not modify the parameter so should be
const anyway.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This allows declaring the commands in any order which sometimes is
convenient when commands are conditional making it undesirable to
sort everything.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
1. Shell will accept CR or LF as line delimiter.
2. Macro SHELL_DEFINE simplified - it no longer requires
new line character.
3. Fixes: #10207.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
