If handle is over the range end return since handles are always placed
in ascending order.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This reduces bt_gatt_foreach_attr complexity (O(n)) so it can skip
ahead when the start handle is not within its service handles.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It may be very important information for the developer if scanning
fails to start or stop, so add proper logs. There's no need to log
EALREADY errors, since the mesh stack doesn't track the current scan
state and simply relies on the under lying GAP layer to return this
error if the desired state is already set.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
bt_gatt_connected should be only called, when there is no
connection error. Change fixes problem with receiving notifications
before connection.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
Set bwPollTimeout for DFU_GETSTATUS request dynamically.
For now, adjust bwPollTimeout only during DNLOAD stage.
Fixes: #8734
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Drop mode in RTT backend was broken. It is not the default
one so most likely it was unnoticed for a long time. Fixed
to report drop message when logs are lost.
Additionally, added assert to ensure that memmove does not
do memory overwrite.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
If for some reason the DNS resolver callback is not called properly
then make sure that semaphore will not block forever.
Fixes#15197
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The commit 8d0ef1eb85 attempted to fix
test case MESH/SR/HM/CFS/BV-02-C, however inadvertently ended up
introducing a hidden bug. This bug was unearthed thanks to commit
686f5c79cf. We have to keep always track
of the FastPeriodDivisor state whether we're using it (faults > 0) or
not (faults == 0). Introduce a boolean field to the model publication
that's used to indicate whether the FastPeriodDivisor should be
applied or not, instead of zeroing the divisor when there are no
faults (this would cause wrong behavior when faults appear again).
Additionally, the PTS seems to require that we wait until the end of
the existing period before sending the next Health Current Status,
rather than sending it immediately when the fault count changes.
Fixes#15365
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Only enable netusb for the right configuration of interface and
alt_setting.
Fixes#13560
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Include to the callback parameters also alt_setting to be able to make
right choice for ECM.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Fix the controller implementation to make start encryption
queueable if there is any control procedure in progress.
The context related to encryption procedure is now shared so
that it will be used after the ongoing procedure completes.
The fix here maintains the old functionality of serializing
the queued data and LL Encryption Request PDU, so that data
queued before start encryption is acknowledged.
Fixes#15012.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When VLAN is enabled, ethernet l2 layer fills ethernet header
but not added to the network buffer.
Fixes#15346
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Implement the Controller counterpart to CONFIG_BT_WAIT_NOP so that it
issues a NOP Command Complete event after booting up, to signal to the
Host that it is ready to receive HCI traffic.
Fixes#15333
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
When a device is considered unpaired any configuration set in Client
Features shall also be removed.
Fixes#15329
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes an issue where if timestamp == service_due_timestamp,
we don't call the periodic service. Then the following call to
engine_next_service_timeout_ms() returns 0 because the service
is still due and lwm2m_engine_service() is called again.
This process repeats several times until the value of
k_uptime_get() changes and then the work is finally handled.
Previously, the resolution of k_uptime_get() was in ms. A recent
change to this API defaults Zephyr so that the resolution is
set via CONFIG_SYS_CLOCK_TICKS_PER_SEC (default 100).
This means the value of k_uptime_get() only changes every 10ms.
Reported-by: Github User pieterjanc
Signed-off-by: Michael Scott <mike@foundries.io>
"It's a Trap!" -- Admiral Ackbar
When moving to the BSD-socket APIs, the original thread running LwM2M
periodic services such as observes and lifetime updates, was replaced
with a re-occuring workqueue job. To save the overhead of creating a
new thread, I used the system workqueue for these jobs.
This was a mistake. If these jobs hit a semaphore or wait for some
reason, it cannot be prempted due to the priority of the system work
queue.
Let's instead add this service handling to the thread that we already
use for polling sockets. This also removes a configuration issue where
the system workqueue stack size needed to be increased. This can now
be adjusted via the LWM2M_ENGINE_STACK_SIZE knob.
Directly fixes semaphore usage in the socket-based DNS code.
This was introduced as a bugfix for non-responsive DNS server hanging
the Zephyr device forever. However, this probably fixes randomly
seeming hangs on the device.
Signed-off-by: Michael Scott <mike@foundries.io>
Send unknown rsp instead of asserting when encryption related control
PDUs are received in the wrong state.
This would allow an attacker to intentionally crash the device.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Stop the Length request procedure from initiating during the encryption
procedue. This would cause the peer to disconnect the link with error
code LMP_TRANSACTION_COLLISION
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Set the encryption procedure pending and start it as soon as
there are no other procedures running.
This allows the Host to enqueue the encryption procedure, and not
get disallowed command because a different LL procedure is active.
Fixes#15012
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
When calling bt_unpair() the keys were removed from flash, however a
pointer was left to the invalidated keys in case there was an existing
connection. This would then lead to a bogus entry being stored in
flash for a zero-address peer device. Fix this issue by clearing the
conn->le.keys pointer in the bt_unpair() function.
Fixes#15325
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The bt_mesh_fault_update() API is meant for updating the publication
message and sending it out to the network, however it was missing the
necessary call to health_pub_update() which is responsible for
updating the publication message.
Fixes#15300
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Increase the default mgmt event stack size from 512 to 768 because of
stack overflows.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
A transport may receive multiple bytes of data between shell_thread
wakeups, but state_collect is only called once per wakeup. So it must
process all data, and only return when all data from the transport has
been consumed. This is mostly handled correctly, but there were two
places where state_collect would return early instead.
Signed-off-by: Jim Paris <jim@jtan.com>
Fixes:
.../zephyr/subsys/bluetooth/shell/bt.c:906:12:
warning: 'cmd_chan_map' defined but not used [-Wunused-function]
Signed-off-by: Jim Paris <jim@jtan.com>
Persistent storage is done. So are the configuration and health
clients. We're also not actively looking to optimize the provisioning
protocol & mesh networking memory usage anymore.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Unlike CONFIG_HW_STACK_PROTECTION, which greatly helps
expose stack overflows in test code, activating
userspace without putting threads in user mode is of
very limited value.
Now CONFIG_TEST_USERSPACE is off by default. Any test
which puts threads in user mode will need to set
CONFIG_TEST_USERSPACE.
This should greatly increase sanitycheck build times
as there is non-trivial build time overhead to
enabling this feature. This also allows some tests
which failed the build on RAM-constrained platforms
to compile properly.
tests/drivers/build_all is a special case; it doesn't
put threads in user mode, but we want to ensure all
the syscall handlers compile properly.
Fixes: #15103 (and probably others)
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We need all the socket APIs to work from user mode.
tests/net/socket/misc now runs in userspace.
Fixes: #15227
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This macro is slated for complete removal, as it's not possible
on arches with an MPU stack guard to know the true buffer bounds
without also knowing the runtime state of its associated thread.
As removing this completely would be invasive to where we are
in the 1.14 release, demote to a private kernel Z_ API instead.
The current way that the macro is being used internally will
not cause any undue harm, we just don't want any external code
depending on it.
The final work to remove this (and overhaul stack specification in
general) will take place in 1.15 in the context of #14269Fixes: #14766
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The fix done in #14938 introduced a later assert when raising an HCI
event for the procedure that was terminated during the procedure
collision handling. This assert happens because the unknown rsp
has information that is needed when raising the event.
Solve this by copying the scratch packet into the node buffer so that
we keep the data.
Fixes#15183
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Merge cb_usb_status_composite and cb_usb_status and use common
forward_status_cb for both composite and normal devices.
Fixes#14882
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
We renamed _sys_trace_thread_switched_in to
z_sys_trace_thread_switched_in, however we already had a function
named z_sys_trace_thread_switched_in. So rename z_sys_trace... to
z__sys_trace...
Fixes: #15184
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
for SDK 0.10.0, it consumes more stack size when coverage enabled
on qemu_x86 and mps2_an385 platform, adjust stack size for most of
the test cases, otherwise there will be stack overflow.
Fixes: #14500.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Rename reserved function names in the subsys/ subdirectory except
for static _mod_pub_set and _mod_unbind functions in bluetooth mesh
cfg_srv.c which clash with the similarly named global functions.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Rename reserved function names in drivers/ subdirectory. Update
function macros concatenatenating function names with '##'. As
there is a conflict between the existing gpio_sch_manage_callback()
and _gpio_sch_manage_callback() names, leave the latter unmodified.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
The legacy struct s_coopFloatReg was never being used, though it was
an empty struct (not wasting space), some symbols were being generate
for it.
Nevertheless, neither C99 nor C11 allow empty structs, so this
was also a violation to the C standards.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
DNS is not part of L3, but as dhcpv4 or the net shell, it is a services
on top of the network stack. So let's gather all in a dedicated
function.
This also rework the order when starting the DNS service. There was an
issue for offload device: these would be fully initialized in
init_rx_queues() which was called after l3_init. l3_init had already
started dns: which would not be able to bind correctly, proving to be
fully dead afterwards. Instead, starting the dns at the very end
ensures that all is initialized properly from devices to stack.
Fixes#15124
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
With or without options headers it has to work. Currently it was
setting always hop-by-hop next header which is obviously wrong but
worked on ipv6_fragment test since that one has only packets with
optional headers (hop-by-hop in that case has to be the first optional
header).
Fixes#14622
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The spec allows to set to no specific value with use of 0xffff.
As this still enables entering values in the invalid range, 3200-65535
for min/max interval, this adds the necessary build checks to prevent
values within this range to be used and at same time check if min
interval is not bigger that max interval.
Fixes#15017
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This is to fix build errors complaining about undefined reference
to __gcov_exit(). There is no special processing required here
so leave the function empty.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
In order to advertise directed to a privacy enabled central the
initiator field of the directed adv packet needs to set to an RPA.
To instruct the controller to use an RPA in the initiator field own
address type should be set to either 0x02 or 0x03.
Since it is not certain that a remote device supports address resolution
of the initiator address we add an option to turn this on and give the
application the responsibility to check if peer supports this.
Fixes#14743
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
