Check if the encryption procedure is in progress when receiving
rejection for the procedure.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix issue in the handling of LL_REJECT_EXT_IND packets, this would look
at the procedures that are enqueued, and not the procedure that was
being rejected. This meant that although a reject was received for the
encryption procedure, the handling for a different control procedure was
run.
This would result in the link being terminated as control procedure
timer would time out for the encryption procedure.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Static variables and functions don't need #ifdefs if the code calling
them is using IS_ENABLED(). If IS_ENABLED() evaluates to false the
compiler will strip out all the static entities.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Static variables and functions don't need #ifdefs if the code calling
them is using IS_ENABLED(). If IS_ENABLED() evaluates to false the
compiler will strip out all the static entities.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Static variables and functions don't need #ifdefs if the code calling
them is using IS_ENABLED(). If IS_ENABLED() evaluates to false the
compiler will strip out all the static entities.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When aborting radio event, there is a possibility that the
packet timer would start the radio while the packet timer
is being reset. Hence, perform a second radio state disable
with packet timers uninitialised.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing radio status and configurations reset on radio
event abort. This caused under race conditions the radio
being put into active state after being aborted.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix incorrect ticker/mayfly user id used in scheduling the
abort of a radio event. Incorrect use of thread context as
the caller caused the abort function to be scheduled from
thread context while being called from ULL high context
level in reality. This could cause corruption of mayfly
scheduling.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When flash driver requests abort of radio event in unreserved
time space, resume radio events in the pipeline were not
flushed. These resumed events caused flash driver to assert
on the check whether radio was in use.
Fixed by flushing the pipeline of all radio events, resume
and also those events in pipeline with pre-empt timeout
being setup.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When multiple simultaneous peripheral connections are
supported, restarting connectable advertising by host on
peripheral connection establishment failed in controller.
This prevented establishing new connections while first
connection was active.
The failure was caused by a bug in the way controller was
using quota for Rx PDU buffers. As the quota count was
release before the connection complete event rx PDU buffer
being released, the Rx PDUs needed to reserve for
connection complete event for new connectable advertising
was not available. This caused the connectable advertising
enable to fail.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix bug in ATT reset handling, not releasing queued notification
buffers when the connection is terminated.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
create_ipv6_answer() function is behind #define's but get used behind
IS_ENABLED(CONFIG_NET_IPV6), which is not allowed.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Use the int_literal_to_timeout Coccinelle script to convert literal
integer arguments for kernel API timeout parameters to the standard
timeout value representations.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Periodically wake up log process thread consume more power if system
already in sleep or deep sleep state. With the help of added logging
timer and semaphore, log process thread is woken up only when there
is logging message.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Use entropy driver directly in bt_rand instead of stitching together
calls to sys_rand32_get to improve efficiency. The use of
sys_rand32_get could also leak timestamps into keys.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Added support for vendor specific meta data in LLL node_rx_hdr. This
enables vendors to add "footer" data to the RX PDU, for supporting
specialized BLE features.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Even though interrupts are locked before processing in synchronous
call, it is still possible that they will be interrupted by NMI.
In that case log_output module may assert because of buffer
overwritting.
Added flushing of log_output buffer before starting the process to
ensure that output buffer is always in reset state at the beginning.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Several C++ std library headers use __str as internal
variable names. If those headers are included after
tc_util.h is included those headers fail to compile
because tc_util.h defined __str to be a macro.
Fixed by renaming the __str macro to TC_STR.
Signed-off-by: Erwin Rol <erwin@erwinrol.com>
Move tinycrypt related header into test and make those tests only build
on native_posix. The tests are unit tests, ie. testing tinycrypt
functionality only without any dependency on the underlying system.
Long term we should move those to be true unit tests and create
functional and integration tests that use tinycrypt in the context of
Zephyr and for real use-cases.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
There are two problems with how zephyr/subsys/usb is being added to
the include path. Firstly it is using the zephyr_library_ API to
modify the zephyr library, when the zephyr_ API should have been used.
Secondly the code is located in the class directory even though it
affects the more general usb directory.
This patch fixes these issues. Using zephyr_library_ in this instance
works by accident when 'zephyr' is the current library but has not
guarantees of working in the future.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Immediate logging is not compatible with the software-based controller
due to the additional ISR latency that it introduces. Ensure that
deferred logging is in use whenever using the software-based LL.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The log mechanism, even in immediate mode, adds somewhere
between 1K-2K of footprint to applications that use it.
We want to standardize the logging APIs for all logging
within the kernel, but need to not let platforms with
very constrained RAM/ROM in the dust.
This patch introduces CONFIG_LOG_MINIMAL, which is a very
thin wrapper to printk(). It supports the APIs expressed
in logging/log.h.
This will be the new default for test cases.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These checks should be against CONFIG_SHELL_LOG_BACKEND,
and not against CONFIG_LOG, since it's possible to enable
logging without building this particular backend.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
usb_handle_bos() and usb_handle_os_desc() are got invoked from
usb_handle_standard_request(), remove those unneeded logs.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Kconfig does not set SETTINGS_NONE as default backend (meaning no
backend) because SETTINGS_NONE is optional. There is no difference
between SETTINGS_NONE and SETTINGS_CUSTOM. By removing the optional line
SETTINGS_NONE is selected as default, to use a custom backend
SETTINGS_CUSTOM=y must be set.
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
We now define z_is_idle_thread_object() in ksched.h,
and the repeated definitions of a function that does
the same thing now changed to just use the common
definition.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The main and idle threads, and their associated stacks,
were being referenced in various parts of the kernel
with no central definition. Expose these in kernel_internal.h
and namespace with z_ appropriately.
The main and idle threads were being defined statically,
with another variable exposed to contain their pointer
value. This wastes a bit of memory and isn't accessible
to user threads anyway, just expose the actual thread
objects.
Redundance MAIN_STACK_SIZE and IDLE_STACK_SIZE defines
in init.c removed, just use the Kconfigs they derive
from.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Handle case where:
- Peripheral sends security request after master has sent pairing
request or started encryption procedure.
This packet can be ignored, as long as the slave has not already
responded with pairing response.
- Central wants to start security after peripheral initiated security
request, return error code busy in this case
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Move initiating security functionality and LTK requesting into the SMP
module so that SMP can track when the connection is in the encryption
process
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Move the bt_smp_keys_check function above all usage of the function
in order to avoid prototype declaration when making the function static.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix calling bt_hex and bt_addr_le_str multiple times in the same logging
call could result in string overwritten since log_strdup is not
guaranteed to duplicate the string buffer in all logging configurations.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Added to allow vendor specific increase of user operation capacity for
ULL_HIGH, to support queuing additional ticker operations.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Enabled use of ticker must_expire feature for ensuring ADV timing
randomization, even when ADV doesn't get air-time. This reduces ADV
collisions. Not active for nRF51 platform for now.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Added support for vendor specific meta data in LLL conn object. This
enables vendors to add state data to connection, for supporting
specialized BLE slave features.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix regression introduced in refactoring of use of SWI.
Reduced use of SWI cannot be used in combination with
CONFIG_BT_CTLR_LOW_LAT as additional SWI is required
to split ticker WORKER and JOB contexts in order to
disable JOB but keep WORKER enabled.
Regression introduced in commit 78b461ae3e ("Bluetooth:
controller: Refactor use of SWI").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The callback function has been ignored in z_timeout_init() since the
timer rework in fall 2018. Passing real handlers to it in code is
distracting when they will be overridden by whatever callback is
provided in z_add_timeout().
As this function is an internal API deprecation is not necessary.
Remove the parameter and change all call sites to drop the argument.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Calling indicate or notify on a disconnected connection object would
result in the error code ENOMEM when failing to acquire buffers instead
of the expected return code ENOTCONN.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The test suite is filled with tests that make assumptions (e.g. about
exactly when other threads will be scheduled) that don't work when
there is another CPU available to handle the load.
Add a feature to the test suite that can "hold" all but one CPU while
the test executes, leveraging the very nice setup/teardown callbacks
to do it. When there is only one CPU, this becomes a very fast noop
of course.
Note that the hold is done by disabling interrupts and spinning, so it
comes with significant CPU cost and tends to drive up the load on the
CI system (and cause other spurious failures on unrelated tests!), so
this can't be used for long-running test cases.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Stop linking interface libraries against zephyr_interface. This is
cargo cult code that in practice does nothing.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The start timestamp was supposed to signify the starting point of the
clear procedure. The code was incorrectly initializing it to the *end*
point of the procedure.
Fixes#19263
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Do not check size of REQUEST_BUFFER for Data stage IN
transactions. The check can not be done effectively because
the pointer (usb_dev.data_buf) can be changed and the actual
size of the buffer used is unknown at this point.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Various C and Assembly modules
make function calls to z_sys_trace_*. These merely call
corresponding functions sys_trace_*. This commit
is to simplify these by making direct function calls
to the sys_trace_* functions from these modules.
Subsequently, the z_sys_trace_* functions are removed.
Signed-off-by: Mrinal Sen <msen@oticon.com>
Some modules use snprintk to format the settings keys. Unfortunately
snprintk is tied with printk which is very large for some embedded
systems.
To be able to have settings enabled without also enabling printk
support, change creation of settings key strings to use bin2hex, strlen
and strcpy instead.
A utility function to make decimal presentation of a byte value is
added as u8_to_dec in lib/os/dec.c
Add new Kconfig setting BT_SETTINGS_USE_PRINTK
Signed-off-by: Kim Sekkelund <ksek@oticon.com>
