Disable the controller advertising extension feature default setting
until the feature is complete. The zephyr host requires the
LE Advertising Set Terminated event to function.
Without this event a peripheral connection cannot pair because the
local on-air address is not set, and the advertising state will not be
cleaned up, so advertising cannot be started again.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The frnd->last buffer can potentially be NULL if friend_clear is called
after the adv.c buf->busy check, but before the adv_start callback.
The current design is based on the adv.c thread being cooperative, and
therefore not yielding between the busy check and the adv_start
callback, but as the bt_le_adv_start call has to acquire a semaphore,
there's a possibility for friend_clear being called inbetween.
Fixes#26177.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Added automatic strdup for RAM %s parameters. Postponed format
processing to idle time. Automatic parameters counting during
compilation. Very fast execution for up to three parameters.
Signed-off-by: Tomasz Konieczny <tomasz.konieczny@nordicsemi.no>
Introduced interface for efficient logging from external logsystems:
Added handling of vaargs and automatic strdup to macros intended
to be used in logging interface function. Fast path to less then 4
arguments to speed up the execution. Made log_count_args external,
if external logsystem cannot count arguments.
Signed-off-by: Tomasz Konieczny <tomasz.konieczny@nordicsemi.no>
Add warning about enabling the options below so that users are
aware that this is a security risk.
- CONFIG_BT_DEBUG_SMP
- CONFIG_BT_DEBUG_KEYS
- CONFIG_BT_OOB_DATA_FIXED
- CONFIG_BT_USE_DEBUG_KEYS
- CONFIG_BT_STORE_DEBUG_KEYS
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
When compiling the settings subsystems, I was getting the following
compiler warning:
```
/home/markus/src/wrp-n4m/zephyr/subsys/settings/src/settings_line.c: In function 'settings_line_cmp':
/home/markus/src/wrp-n4m/zephyr/subsys/settings/src/settings_line.c:477:6: warning: 'rc' may be used uninitialized in this function [-Wmaybe-uninitialized]
477 | int rc;
| ^~
/home/markus/src/wrp-n4m/zephyr/subsys/settings/src/settings_line.c: In function 'settings_line_entry_copy':
/home/markus/src/wrp-n4m/zephyr/subsys/settings/src/settings_line.c:453:9: warning: 'rc' may be used uninitialized in this function [-Wmaybe-uninitialized]
453 | return rc;
```
This patch fixes the warning.
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
This is no longer required since drivers implementing the sockets
offload interface were migrated to use pure zsock_ instead of
raw POSIX types and functions.
Signed-off-by: Adam Porter <porter.adam@gmail.com>
A net context in LISTENING mode waits for incoming connections, once
a new connection is established a new net context is spawned which
is responsible for handling the new connection.
Therefore when closing a LISTENING context it is not useful to send FIN
as it is never connected. Actually closing the connection would be done
by calling close on the spawned net context which is returned by the
accept call.
Signed-off-by: Léonard Bise <leonard.bise@gmail.com>
Currently there is chosen the link local address as a source address
for each multicast destination address. It is a bug for OpenThread
network where the mesh-local EID addres should be picked in this case.
This commit fixes it by distinquish the mesh local multicast among any
others.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
With timeout==0 count is set to 0 as well and then it is decremented to
-1. It is later checked == 0 and continues to decrement and loop.
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
Use the NRF RNG entropy device as the entropy device for bt_rand and
controller internal functions when LLL is Nordic.
Using an entropy source with a significant increase in stack usage
will invalidate all stack size configurations in the system and lead
to stack overflow issues.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
It was not clear that hexdump messages does not support prepending
with function name. Added clarification.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Fix compilation regression due to addition of const
qualifier to tx_pwr_lvl parameter of ll_tx_pwr_lvl_set
function. Support for BT_CTLR_TX_PWR_DYNAMIC_CONTROL
needs the tx_pwr_lvl to be updated and returned.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Under Linux when you shutdown a socket which is blocked on
an accept call the error code returned by accept is EINVAL.
Modify the socket code to be inline with this behaviour.
Signed-off-by: Léonard Bise <leonard.bise@gmail.com>
When closing a listening socket the functions waiting on the
FIFO will be unblocked this will result in receiving a NULL child
context. If that is the case return an error instead of carrying on.
Return the same error code (EINVAL) that is returned on Linux when
calling shutdown on a blocked accept call.
Signed-off-by: Léonard Bise <leonard.bise@gmail.com>
In case CoAP packet does not carry payload, and the last option is
zero-length, the option structure was not filled with data (opt number
and length). Fix the length check to prevent this from happening.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This should be boolean according to specification. It makes difference
when JSON encoding is used.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Sets thread names for all usb device class threads (bluetooth, bt_h4,
mass storage, and rndis) to aid debug.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This patch introduces the support of low power modes
for the STM32L4xx from STMicroelectronics based on the lptim
Here, the power modes are sleep modes with lptimer as wakeup.
Depending on the SYS_POWER_MANAGEMENT configuration.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Avoid null pointer access by checking that Ethernet device has
PTP clock before trying to get the actual PTP clock device.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
So far net config initialization code relied on number of services
needed by application. This was fine as long as all enabled
services (e.g. CONFIG_NET_IPV4=y, CONFIG_NET_IPV6=y) were selected by
project configuration as "needed" (e.g. CONFIG_NET_CONFIG_NEED_IPV4=y,
CONFIG_NET_CONFIG_NEED_IPV6=y). Problem appeared for example when both
IPv4 and IPv6 were enabled (CONFIG_NET_IPV4=y, CONFIG_NET_IPV6=y), but
only IPv6 was marked as "needed" (CONFIG_NET_CONFIG_NEED_IPV6=y). In
such situation number of required services was equal to 1. When IPv4
setup was completed, this resulted in returning from net_config_init()
function. Application code failed, because IPv6 was still not
functional.
Do not rely on number of services anymore, as it is error prone. Use
flags instead to mark which services are ready. Compare those flags with
the flags passed to net_config_init() (selected in project configuration
in most cases) to decide whether network configuration has completed
already or not.
Also introduce services_notify_ready() and services_are_ready() helper
functions to isolate implementation details from the logic.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
With current design there is single semaphore (called 'waiter') for
wakeing up initialization thread. This thread should then check for
number of protocols that still need to be initialized. This happens now
only when waiting on 'waiter' semaphore times out.
Do not check for k_sem_take(&waiter) return value, as all needed
information about protocols being initialized already is in 'counter'
semaphore.
Fixes: #25358
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Add command to register a receive callback to the net_context used for
the TCP connection that is opened with 'net tcp connect'. The receive
callback will simply print the number of bytes received and inform if
the connection is closed. This makes it possible to test both the tx
and rx paths with the net shell.
Signed-off-by: Tobias Svehagen <tobias.svehagen@gmail.com>
It might happen that while we are waiting for the response
to one of our query, we receive a query to resolve another name.
Previously this would make the current name resolution to fail because
only responses were expected to be received.
Signed-off-by: Léonard Bise <leonard.bise@gmail.com>
stream_flash_bytes_written() returned number o bytes physically
written to the flash. This number might be bigger than the requested
number as is aligned to the device write-block-size.
stream_flash_bytes_written() should return number of bytes
written requested by the user.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
For some reason GCC 9.x doesn't seem to be able to realize that set_num
will always be > 0 and so the local variable status will always be
initialized. Use a do {} while instead to keep it happy.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fix missing implementation of initialization of common
advertising header bit fields when new auxiliary channel PDU
is instantiated. This caused corrupt invalid Bluetooth
Device address being copied from uninitialised previous
auxiliary PDU instead of copying from primary channel PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Review rework, added comments, TODOs, FIXMEs and converted
magic number use in advertising set state flags to defines.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added comments and code to make note that disabling all
advertising sets is not yet implemented.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor pdu.h defined in anticipation of reused in
Advertising Extensions implementation. To reuse in
calculating ticks_slots etc.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix segmentation fault detected by BabbleSim test due to
incorrect number of tickers being allocated.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Avoid ticker from null pointer dereferencing when storing
operation callback functions to be called during collision
resolution.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix scan set allocation using BT_CTLR_SCAN_SET instead of
an incorrect duplicate BT_CTLR_SCAN_MAX.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
