Incorrect address was being taken for cpus_states variable, causing
transition to low power modes to fail with an assertion (since the data
in the pm_state_info struct is no longer valid). Fix the address.
Fixes#41244
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Similar what is done in pm_device_state_set, checking if the power
state for a given device in pm_device_action_run is locked.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Set the number of L2CAP TX buffers suffiently high if MCS (media
control) is enabled.
Add BUILD_ASSERT if number is too low.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Kconfig choice allows to set a default, so there is no need for an extra
hidden Kconfig option.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Check that minimum residency time is greater than exit latency time for
all CPUs power states at compile time.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The values contained by the array are const, and number of states is
usually far below 255, so uint8_t can be used.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Change the function pm_device_runtime_enable() to return 0 on
success or an error code in case of error.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add a new API to lock a device pm state.
When the device has its state locked, the kernel will no longer
suspend / resume devices when the system goes to sleep and device
runtime power management operations will fail.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Rework suspended to be a shared atomic variable between
bluetooth_status_cb() and hci_tx_thread().
If the bus is suspended, initiate remote-wakeup and
wait until the bus is operational.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
When CONFIG_TRACING_OBJECT_TRACKING is enabled, the kernel will keep
lists of some objects (detailed below), so that debuggers or other tools
can keep track of them.
The lists of objects are:
struct k_timer *_track_list_k_timer;
struct k_mem_slab *_track_list_k_mem_slab;
struct k_sem *_track_list_k_sem;
struct k_mutex *_track_list_k_mutex;
struct k_stack *_track_list_k_stack;
struct k_msgq *_track_list_k_msgq;
struct k_mbox *_track_list_k_mbox;
struct k_pipe *_track_list_k_pipe;
struct k_queue *_track_list_k_queue;
Note that while CONFIG_TRACING is needed, one can always use
CONFIG_TRACE_NONE=y. Also, tracking will only be done for objects that
are also being traced (so, to prevent tracking of some type of object,
such as k_timer, just make CONFIG_TRACING_TIMER=n).
Some simple "sanity checking" tests are also added in this patch.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
Adds Xtensa as supported architecture for coredump. Fixes
a few typos in documentation, Kconfig and a C file. Dumps
minimal set of registers shown by 'info registers' in GDB
for the sample_controller and ESP32 SOCs. Updates tests.
Signed-off-by: Lauren Murphy <lauren.murphy@intel.com>
Since enabling runtime pm on a device sets the device state to
suspended. The usage count has to be zeroed otherwise we may
have an inconsistency.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
It is not possible to rely on pm->dev to do lazy initialization of
some components. For example, in the follow sequence of commands:
1 - pm_device_runtime_enable()
pm->state == PM_DEVICE_STATE_SUSPENDED;
2 - pm_device_runtime_disable()
pm->state == PM_DEVICE_STATE_ACTIVE;
3 - pm_device_runtime_enable()
pm->state == PM_DEVICE_STATE_ACTIVE
After the first time pm_device_runtime_enable(), the device state will
be suspended, but after the second time this function executes the state
will be active. That is not consistent.
It is just easier to remove the branch check and always set those
fields for the sake of consistent.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Storing CCC right after it's written reduces risk of inconsistency
of CCC values between bonded peers. The option should be enabled by
default. The developer could explicitly disable it to reduce memory
usage. After disabling the option explicitly, the developer is
aware of related potential issues.
Fixes: #40758
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
CONFIG_BT_LOG_SNIFFER_INFO allows print of LTK for debugging.
If CONFIG_BT_SMP_SC_PAIR_ONLY is set a non-existing struct
entry was printes, which caused a compile-time error.
Signed-off-by: Casper Bonde <casper_bonde@bose.com>
Replace deprecated macro USBD_CFG_DATA_DEFINE by
USBD_DEFINE_CFG_DATA which places usb_cfg_data structures
in specific iterable section.
Replace __usb_data_start, __usb_data_end usage patterns
size_t size = (__usb_data_end - __usb_data_start);
for (size_t i = 0; i < size; i++) {...}
by
STRUCT_SECTION_FOREACH(usb_cfg_data, ...) {...}
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Fix all instances in the controller of -Waddress-of-packed-member by
casting through an intermediate variable and verifying the alignment
with an assertion.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Rework samples to use DEVICE_DT_GET and DT_CHOSEN
to get default display controller device.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
MCUMgr sample was failing to build due to including a deprecated header.
Replace it with the new header file to fix the build.
Fixes#41050
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
When CONFIG_NET_HOSTNAME_ENABLE=y, local_addrX may be used uninitialized
causing unexpected behaviour.
Signed-off-by: Robert Melchers <robert.melchers@taitradio.com>
Add reception of IQ sample report from controller.
Add applications notification about received reports.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add enable of CTE reception and sampling in connected mode.
The implementation allows an application to decide what type
of CTE is expected to be reported. Bluetooth Core specification
does not provide such functionality, so it is provided as part
of host implementation. Host will filter out all reports for not
enabled CTE types.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
The BT_BUF_RX_SIZE did not take the CONFIG_BT_ISO_RX_MTU
into account. Add BT_BUF_ISO_RX_SIZE which
depend on CONFIG_BT_ISO and use that for the
BT_BUF_RX_SIZE macro.
Furthermore, move the BT_BUF_RX_COUNT macro definitions
into buf.h and update that to account for ISO RX as well.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Deprecate the use of CAN-specific error return values and replace them
with standard errno values.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
This commit adds an option to store OpenThread settings in RAM for the
case where the flash driver is not available. This can be useful
for testing openthread on new platforms which are still under
development.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Bluetooth callbacks are now registered dynamically again. When Bluetooth
callbacks were registered statically, they could be invoked before the
Bluetooth shell (ctx_shell) is initialized. The callbacks try to
shell_print(ctx_shell, ...), which results in a fatal error if ctx_shell
is undefined.
Fixes#40881.
Signed-off-by: Andreas Rudolf <andreas.rudolf@husqvarnagroup.com>
Add new Kconfig BT_CONN_TX which is true if the ACL and
ISO configuration allows for sending data. This is mainly
used to avoid initialization of the tx_complete_work
for ISO sync receiver only builds.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
If CONFIG_BT_ISO_BROADCASTER=y and CONFIG_BT_CONN=n, i.e
an ISO broadcaster only build, then the handling of the
TX callback was not properly initialized, causes a fatal
issue when sending.
This commit moves the tx_complete_work out from the ACL group
and into the common area, so that it will be enabled
for connected ISO as well as broadcaster ISO.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Although we are declaring `pm->enable`as bitfield, it ends up using
more memory due memory alignment.
Since we already have an atomic variable for device flags, this commit
adds a new flag to indicates whether or not device runtime is enabled.
Doing it we are saving some extra bits and avoiding need to lock the
mutex in several situations since we can atomically check if pm
runtime is enabled on a given device.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Refactor implementation to use a single common ISO PDU
node rx type for ISO Synchronized Receiver.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Adds reassembly of framed PDUs to ISO adaptation layer.
Reference times are also computed based on anchor points,
transmission latency components and a PDU specific time offset.
Some partial preparations for ISO broadcast can be found for
convenience. This needs to be properly merged, and currently will not
work with both CONFIG_BT_CTLR_CONN_ISO and CONFIG_BT_CTLR_SYNC_ISO
enabled.
Includes fixes and improvements for unframed mode.
Signed-off-by: Asger Munk Nielsen <asmk@oticon.com>
Signed-off-by: Morten Priess <mtpr@oticon.com>
The GATT Server should wait with clearing Service Changed
indication configuration data until the response callback is
called. Otherwise the indication may not be properly delivered
to a given GATT Client.
Fixes: #40761
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
Atempting to mount LittleFS with the flag will cause the fs_mount
to return -ENOSUP and log error message.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Mounting FAT FS will set FS_MOUNT_FLAG_USE_DISK_ACCESS to the flags
of an object serving the mount point.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
