Audio streams as defined by the BAP spec does not
support bidirectional audio streams. This commit
updates the API and implementation to match that.
The use a bidirectional CIS with 2 audio stream will
be added in a future commit.
This removes the _IN_ and _OUT_ and _INOUT_ QOS
values, as well as the direction of the codec QOS
struct.
To keep direction for internal use, the direction
has been added to the endpoint struct.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add the BASS client implementation
This is a standalone implementation that
needs to be (heavily) modified for the
broadcast assistant role in the future.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add the BASS as a standalone service. The service is
used for the scan delegator role, which has not been
fully implemented yet.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Make it consistent for audio.h and capabilities.h that the
array size parameter appear after the array parameter.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Check if the CTE was discovered by Radio peripheral should be
done with use of CTEPRESENT event. Samples count should not
be used for that purpose. If samples count is a value different
than zero for PDUs that don't have CTE, unwanted IQ samples
report will be generated. CTEPRESENT event is set only in case the
CTEInfo filed was correctly parsed by Radio peripheral during
PDU reception.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Don't replace destination of segmented message when acknowledgement is
received from a friend node, otherwise, when segments are retransmitted,
the destination will be used and the friend node will treat it as a new
segmented message.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
BT_ATT_OP_READ_MULT_VL_REQ, BT_ATT_OP_READ_MULT_VL_RSP, and
BT_ATT_OP_NOTIFY_MULT were missing.
Because of this, multiple variable length reads did not time out.
Signed-off-by: Herman Berget <herman.berget@nordicsemi.no>
Heartbeat publication sent callback can be used
as a watch mechanism to determine whether
the mesh stack is still capable of sending messages or not.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Fixes#42306
Attach bt_att_chan objects to bt_att when creating them so that the
check in att_chan_new() works. Use the flag ATT_CONNECTED to signal that
a channel is connected instead of attaching it.
The flag ATT_DISCONNECTED was not set anywhere and is replaced by
ATT_CONNECTED.
Signed-off-by: Herman Berget <herman.berget@nordicsemi.no>
We emulate the interrupt by sending the IPI to core itself by
the local APIC for x86 platfrom.
But in X2APIC mode, this no longer works. So we emulate the
interrupt the by writing the IA32_X2APIC_SELF_IPI MSR to send
IPI to the core itself via LOAPIC also. According to SDM vol.3
chapter 10.12.11.
Fixes#42108
Signed-off-by: Enjia Mai <enjia.mai@intel.com>
Add `remaining_size` in struct ad_stream.
By calculating the actual space required instead of
using the maximum space.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
According to Kconfig guidelines, boolean prompts must not start with
"Enable...". The following command has been used to automate the changes
in this patch:
sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig*
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Fix Extended Advertising implementation to setup Power
Amplifier (PA) GPIO toggle for transmission instead of
incorrect Low Noise Amplifier (LNA) setup which is for
reception.
Relates to commit 4e5290948e ("Bluetooth: Controller: Fix
Periodic Advertising to setup Power Amp").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Do not implicitly allocate Rx buffers for maximum chain PDU
reception. Instead let applications increase as required the
Kconfig CONFIG_BT_CTLR_RX_BUFFERS.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The LE Audio clients will now do more and proper cleanup
during disconnects. Furthermore, the will also
take a proper bt_conn_ref when the conn pointer
is assigned locally.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fix missing configure of Device Address Matching when
receiving auxiliary PDUs.
This fixes some privacy related conformance test cases.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing RPA timer start in Broadcaster only controller
builds.
Without the fix private resolvable addresses where not
updated at RPA timeout.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing implementation to update private resolvable
address in auxiliary PDUs on RPA timeout.
Without the implementation the controller asserted on RPA
timeout when AdvA is not present in the primary channel PDU
of Extended Advertising set.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing reset of sync create association with scan
context when associated with both 1M and Coded PHY contexts,
and sync create cancel is called.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix address resolution when trying to match the maximum
entries in the resolving list.
Wait for address resolution AAR peripheral to complete with
checking with all the entries in the IRK list.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This change introduced some weird failures on x86 that will take some
time to untangle, and wasn't a particularly important feature to
merge. Revert for now.
This reverts commit adc901aa6a.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Some hardware has "interesting" configuration like asymmetric default
interrupt masking (the intel_adsp devices in particular, but x86's
IO-APIC driver has tripped over this in the past too) that needs
special treatment if you want to run something on "core 1"
specifically, and 1cpu test cases pretty much by definition are going
to have been written without SMP details in mind. Switch the logic
around a tiny bit such that these test cases always run on CPU ID zero
explicitly.
Actually in practice this was ALMOST guaranteed to be true already,
because test setup and happens serially, having been started on the
main thread, which starts on CPU 0 by definition. Then the test
teardown aborts all the spawned threads that might have been running
on CPUs 1+, so those reach idle, and the next test case starts
syncronously on the same thread (and thus CPU) where it started. But
nonetheless that wasn't actually enforced, and we've found at least
one simulation environment where timing conspires to break things.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This commit adds implementation of otPlatRadioSetChannelMaxTransmitPower
This function is responsible for setting maximum allowed power on
IEEE 802.15.4 channels.
Signed-off-by: Przemyslaw Bida <przemyslaw.bida@nordicsemi.no>
Prompt was removed by 154ca8526 to ensure that it is not
disable when it is required. That removed possibility of
manually enabling that option my the user. Bringing prompt
back and adding check to code to fail compilation if
LOG2_ALWAYS_RUNTIME is not set but is required.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The extended advertiser would fail to build due to a missing kconfig
option dependency when relay was disabled.
Fixes#43172.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
When local node poweroff and power on again, will
receive iv update but within 96hours.
When 96h after, due to cache, we can't process this
beacon any more.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
According Mesh Profile 3.10.6 IV Index Recovery procedure
Upon receiving and successfully authenticating a Secure Network
beacon for a primary subnet whose IV Index is 1 or more higher
than the current known IV Index, the node shall set its current
IV Index and its current IV Update procedure state from the
values in this Secure Network beacon.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
When pac_notify is called it will notify the
actual PAC records for the specific type (sink/source).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds function get_pac_records that will retrieve the PAC
records from the application. The pac_read callback
will then call this to get the value, before returning
it to GATT.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Some SOCs cannot be flashed reliably in low power modes. If
CONFIG_ZTEST_NO_YIELD is selected, do not yield to the idle thread after
testsuite completes, so that the SOC will not enter low power mode.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Adds an official behavior in response to null response from HTTP
endpoint.
Fixes#42988
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
Add ztest_test_skip() support to non-kernel tests by implementing
long jump buffer and TC_SKIP result collection.
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Fix#42800
Both pss->rate_ratio and port_ds->neighbor_rate_ratio are double type
but sync_receipt_time is uint64_t. If pss->rate_ratio is less than 1
or sync_receipt_time * port_ds->neighbor_rate_ratio is less than 1,
sync_receipt_time becomes 0 due to double to uint64_t cast.
Assign port_ds->neighbor_prop_delay to sync_receipt_time first to fix
this issue.
Signed-off-by: Lu Ding <lucasdinglu@gmail.com>
