XCC is based on GCC 4.2.0 which doesn't support auto type.
So force CONFIG_LOG2_ALWAYS_RUNTIME to be enabled if XCC is
being used.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Make it possible to "finish" with fewer bytes than what was "claimed".
This was possible before on the get side, but the put side was
cummulative wrt finish. The revamp made it cummulative on both sides.
Turns out that existing users rely on the opposite behavior which is
more logical and useful. So make both sides that way.
Adjust documentation, test case and users accordingly.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
No SoCs are re-implementing the constraints API. This _feature_ was
mostly put in place to cover TI platform needs, but it is no longer
needed. Refer to previous commit for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Makes possible to read a single resource instance at a time with
plaint text, JSON and TLV content formats.
Signed-off-by: Veijo Pesonen <veijo.pesonen@nordicsemi.no>
The L2CAP channels were removed from the bt_conn channels list. They
were thus not found in the ecred connection response handler.
Signed-off-by: Herman Berget <herman.berget@nordicsemi.no>
We keep the behavior for legacy advertising data as the controller will
ignore such scenarios when using legacy advertising commands.
Extended non-scannable advertising sets don't support scan response
data. Extended scannable advertising sets don't support advertising
data.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
No ring_buf_get_finish() should be performed on ring_buf memory that
wasn't claimed beforehand. Using ring_buf_get() with a NULL destination
does both the claim and the finish part without retrieving anything.
This is especially important with the ring_buffer revanp where the above
is enforced for proper operation.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The command.param may not always be set in send_command
depending on whether command.use_param is set.
If command.use_param is not set, the command.param is
not logged, and is set to 0.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
If settings wipe fails we are not informed about this what can lead to
bugs which are hard to investigate.
This commit adds log and/or assert which is triggered by this failure.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
If the item has name but no help, there's no need to fill
shell with tabulators and colon at the end of the line.
Signed-off-by: Michał Barnaś <mb@semihalf.com>
Adding mechanism to all the backends to switch the logging formats
at runtime while leveraging the function pointer table based upon
the Kconfigs which also cleans up the logging backend design.
Also demonstrate the working API with the changes
to syst sample. Clean up Kconfig for backends and add a standard
template to generate the Kconfigs for logging formats to be used
by all backends.
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
Add support for new API's log_backend_format_set and
log_format_set_all_active_backends to switch the logging format
for one backend and for all the active backends respectively.
Using format_set function pointer in log_backend_api struct as a hook
to set the log format at runtime in the backends. Add function pointer
table with helper functions to be used as a way to select log format.
Add supported log format types as macros to use with the API.
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
LwM2M version 1.1 will select SenML Json for default content format.
Version 1.0 will use TLV format.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
LwM2M engine Send operation support /dp.
Send operation based on Composite Read functionality
which is not enabled at engine side like composite write.
Added Kconfig configurable for composite read path list size.
Created generic Read object instance which is shared between
general read and Composite Read operation.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
LwM2M SenML JSON contain format support for Read / Write operation.
Added Kconfig configurable for enable SenML JSON format.
LwM2m read validate read operation and report out of memory.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
Change the CPU_CORTEX_R kconfig option to CPU_AARCH32_CORTEX_R to
distinguish the armv7 version from the armv8 version of Cortex-R.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Remove deprecated functions in the previous release. Note that PM API is
not marked as stable.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Aligning with the rest of PM API, replace pm_power_state_exit_post_ops
with pm_state_exit_post_ops.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Fix Periodic Advertising PDU ACAD set and clear interface to
support updating ACAD when previous and new PDU buffer are
same (i.e. when previous new PDU not consumed yet by LLL).
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update implementation to have assertion when not finding the
Channel Map Update Indication field in ACAD.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
In case an individual resource is being discovered, the LwM2M client
should not only fill the attributes assinged at the resource level, but
also the ones inherited from the object and object instance levels.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
LwM2M 1.1 allows to write attributes for resource instances as well.
Resource instance level attributes need also to be taken into
consideration when adding/updating observers.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
LwM2M adds Resource Instance reporting in Discovery response, along with
attributes assinged at the Resource Instance level.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Peer may send a zero-length keepalive message, probing the recv window
size - TCP stack should still reply for such packets, otherwise
connection will stall.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add implementation of net_tcp_update_recv_wnd() function.
Move the window deacreasing code to the tcp module - receive window
has to be decreased before sending ACK, which was not possible when
window was decreased in the receive callback function.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Move the unittest.cmake to the new Zephyr CMake modules dir.
This allows us to have a single Zephyr CMake package and load unittest
module as: 'find_package(Zephyr COMPONENTS unittest)'
This unifies the way Zephyr package is sourced and removes the need for
a dedicated ZephyrUnittest package.
Deprecate the use of: 'find_package(ZephyrUnittest)'
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
If OPENTHREAD_IP6_FRAGM is enabled the IPv6 fragments are handled in
OpenThread stack but also forwarder unconditionally to the Zephyr
uplayers. It causes additional packets processing and leads to errors
like unrecognized next header type or duplicate ping reply. What more
these errors generate additional traffic which jam channel and decrease
latency for packets required fragmentation.
This commit add filtering IPv6 fragments when data fragmentation and
reassembling is enabled in OpenThread.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Uninitialized memory would report wrong value for
`mAckedWithSecEnhAck` flag in the received frame, making the
OpenThread stack to update the frame counter for the neighbor
wrongly.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
