The extended advertiser would fail to build due to a missing kconfig
option dependency when relay was disabled.
Fixes#43172.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
When local node poweroff and power on again, will
receive iv update but within 96hours.
When 96h after, due to cache, we can't process this
beacon any more.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
According Mesh Profile 3.10.6 IV Index Recovery procedure
Upon receiving and successfully authenticating a Secure Network
beacon for a primary subnet whose IV Index is 1 or more higher
than the current known IV Index, the node shall set its current
IV Index and its current IV Update procedure state from the
values in this Secure Network beacon.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
When pac_notify is called it will notify the
actual PAC records for the specific type (sink/source).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds function get_pac_records that will retrieve the PAC
records from the application. The pac_read callback
will then call this to get the value, before returning
it to GATT.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Some SOCs cannot be flashed reliably in low power modes. If
CONFIG_ZTEST_NO_YIELD is selected, do not yield to the idle thread after
testsuite completes, so that the SOC will not enter low power mode.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Adds an official behavior in response to null response from HTTP
endpoint.
Fixes#42988
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
Add ztest_test_skip() support to non-kernel tests by implementing
long jump buffer and TC_SKIP result collection.
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Fix#42800
Both pss->rate_ratio and port_ds->neighbor_rate_ratio are double type
but sync_receipt_time is uint64_t. If pss->rate_ratio is less than 1
or sync_receipt_time * port_ds->neighbor_rate_ratio is less than 1,
sync_receipt_time becomes 0 due to double to uint64_t cast.
Assign port_ds->neighbor_prop_delay to sync_receipt_time first to fix
this issue.
Signed-off-by: Lu Ding <lucasdinglu@gmail.com>
Fix k_sem_give() from being called from Zero Latency IRQs
when the Controller is configured with BT_CTLR_ZLI=y.
Kernel features shall not be used from Zero Latency IRQs as
these IRQs cannot be locked by the kernel to maintain
context safety of the kernel objects.
Relates to commit 92e017fd70 ("Bluetooth: controller:
split: Support Zero Latency IRQs") and
commit c842eef3ae ("Bluetooth: controller: Add semaphore
to indicate free AD data buffers").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
sw_switch implementation uses two parallel groups of
PPIs connecting radio and timer tasks and events.
The groups are used interchaneably, one is set for
following radio TX/RX event while the other is in use
(enabled).
The group should be disabled by timer compare event that
starts Radio to TX/RX a PDU. The timer is responsible for
maintenance of TIFS/TMAFS. The disabled group collects
all PPIs required to maintain the TIFS/TMASF. After
the time is reached Radio is started and the group is
disabled. It will be enabled again by software radio
swich during next call.
If the group is not disabled then it will work in parallel
to other one. That causes issues in correct maintenance of
instant when radio shoudl be started for next TX/RX event
e.g. radio may be enabled to early.
In case the PHY CODED was enabled and periodic advertising
included chained PDUs, that are transmitted back-to-back,
there was missing group delay disable. The missing case was
sw_switch function called with dir_curr and dir_next set
to SW_SWITCH_TX.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
The commit:
- removes usage of strnlen to make taskstat code C99 compliant;
- corrects thread name len, following update description of
CONFIG_OS_MGMT_TASKSTAT_THREAD_NAME_LEN;
- reduces duplicated code.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit removes usage of strnlen from echo command to make
code C99 compliant, and allow it to compile with newlib.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The help for the OS_MGMT_TASKSTAT_THREAD_NAME_LEN stated that
the config includes terminating zero, but this is not true:
when thread name is encoded with CBOR it is encoded with actual
string length and is not zero terminated.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
It depends from a content formatter is there need to put constructs
with a path level deeper than object instance. In other words with
resource- or resource-instance-level.
Signed-off-by: Veijo Pesonen <veijo.pesonen@nordicsemi.no>
No need to start the wq every time the mbox is initialized, it must be
done once for all the instances (it is shared by all the instances).
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Since `CONFIG_BT_MESH_PB_GATT` represent to pb-gatt-srv.
We use `CONFIG_BT_MESH_PB_GATT_COMMON` to represent common.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Rename the data and metadata callbacks to _read(), for consistency
with the corresponding function calls.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Move the instance as the first parameter of the client function calls
and callbacks, for consistency with the server implementation.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Merge the metadata types for client and server.
This is part of merging the ots_client and ots header files.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Move the metadata request bitfields to the common header files.
This is part of merging the ots_client and ots header files.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Merge Kconfig file for OTS server and client.
Rename the client config from _OTC to _OTS_CLIENT
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Update the Object Transfer Client to use OTS defines and types instead
of the ones left over from the previous "le-audio local" object
transfer service:
DIR_LIST, object ID size, OACP and OLCP
Remove the no longer used defines and types from the OTC header file.
Exception: The OLCP sort order defines have not been removed, but
moved to the olcp internal header file, for expected later use.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Move the directory listing size defines to the OTS directory listing
internal header file.
This removes an implicit dependency upon users of
ots_dir_list_internal.h to also include ots_internal.h.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
The media control client shell must include the OTC header file.
(It is currently indirectly included via otc_internal.h.)
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Update the OTC to use the existing ots_l2cap code rather than its own
implementation.
- Add an ots_l2cap struct and register it
- Add ots_l2cap callbacks, reuse most of old l2cap_recv callback in
the ots_l2cap rx_done callback
- Remove old l2cap code
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Update configuration so that the OTS l2cap file can also be used for
the OTC.
(The plan is to merge the OTS and OTC config files later.)
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Add an l2cap connect() function to OTS. This is a function for
clients, added to prepare for the upcoming OTC client (re)using the
ots_l2cap module.
As part of this, factor out an internal function to find a free l2cap
context.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Remove L2CAP server registration. The object transfer client does not
need to register an L2CAP server.
OTS spec: "It is always the responsibility of the Client to open the
Object Transfer Channel, regardless of the direction of transfer, and
is never the responsibility of the Server."
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Preparations for making OTC "official"
Move remaining content of old ots header fil into the otc header file,
and remove the old ots header file.
(Another ots header file already exists in the ots folder.)
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
This commit is the first in a series of commits to make the OTC
(Object Transfer Client) implementation that exists in the audio
folder "official". That is, the client implementation will be updated
and refactored to be aligned with the OTS (Object Transfer Service)
implementation that exists in subsys/bluetooth/services/ots, and moved
to that folder.
Preparations for making OTC "official":
Move remaining content of old ots_internal header fil into the
otc_internal header file, and remove the ots_internal header file.
(Another ots_internal header file already exists in the ots folder.)
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
