Move the control point work to the EP. The aim is to cleanup the code so
that it there's no EP for ASE that means ASE is in idle state.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Fixes an issue introduced with a recent change that wrongly uses the
source packet header size for the output instead of the supplied
size.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
It is only needed to be known by SMP protocol processing
and in some cases by transport, for example reassembly.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
These two-liners have been only used by SMP protocol processing,
and there is no reason to have them available as public functions.
Code from these functions have been moved directly where they
have been used and they have been removed.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
zephyr_ prefix is now redundant as there are no other OSes supported.
The commit also moves functions, after renaming them, and makes
them static, as they no longer have to be shared between compilation
units.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
It is no longer needed to have "system specific" API for FS management.
The commit removes fs_mgmt_impl.h and moves Zephyr specific
functions that implement the fs_mgmt_impl.h declared functions
into fs_mgmt.c
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
This fixes an issue whereby the image state of an upload is present
even after an image erase command, which would instruct a client to
continue uploading at an offset that has no preceeding data.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Select BT_TICKER_NEXT_SLOT_GET when BT_LL_SW_SPLIT enabled
and building applications with shell support (BT_SHELL).
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The endpoint was only partially memset on disconnect,
which left the handles untouched. This meant that the
reset endpoint would still get returned by
unicast_client_ep_find.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Program CIG ticker with window widening drift. Introduce vendor specific
conversion macros allowing sub-microsecond resolution in the
accumulation of window widening drift per interval.
Calculation of window_widening_max_us is done for NSE<3, and must be
adjusted in the LLL before use, if the first CIS in the CIG has a
NSE>=3. In that case window_widening_max_us shall be limited to one sub
interval.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Remove the `bt_hex`, `bt_addr_str`, `bt_addr_le_str` and `bt_uuid_str`
macros from `bt_str.h` as they were just aliases for the `*_real` functions
in the same file.
The functions has been renamed without the `_real` suffix.
Some files were using the functions and not the macros, they have been
updated to use the new name of the functions.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Move the function in the `subsys/testsuite/ztest/src/ztest_mock.c` files.
This is motivated by the fact that there is others re-implementation of
`*printk` functions using libc counterparts in the `ztest_mock.c` file.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Functions related to string manipulation that were defined in
`common/log.h` has been moved to the `common/bt_str.h` file and their
implementation in `common/bt_str.c`.
Files that were using those functions has been updated consequently.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Fix ticker slot reserved check to handle deferred execution
of ticker worker where ticks_elapsed is greater than
ticks_slot_previous. In which case, each ticker expiring be
checked for overlap with previous slot reservation.
This fixes:
ASSERTION FAIL [0] @ WEST_TOPDIR/zephyr/subsys/bluetooth/
controller/ll_sw/nordic/lll/lll.c:476
lll_preempt_calc: Actual EVENT_OVERHEAD_START_US = 3906
Flash erase operation exposed the assertion, CPU being
halted deferred the ticker_worker collision resolution and
ticker expiry was not individually checked for overlap with
previous expired ticker reservation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing first connection event due to first connection
event ticks_slot of central and peripheral overlapping with
the initiator window ticks_slot and advertising ticks_slot,
respectively.
Use ticker_stop_abs interface so that when the ticker is
stopped the ticks_slot_previous is truncated to the actual
ticks used as requested by the supplied absolute ticks.
Relates to commit 8a294a62d4 ("Bluetooth: controller:
legacy: Fix missing first conn event").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix ticker instance ticks_current initialization to be
acquired from the RTC counter value. The RTC counter may
have run in previous use of ticker before bt_disable hence
keep the instance ticks_current equal to RTC counter value
when ticker_init() is called again.
Relates to commit 4349a475a8 ("Bluetooth: Controller: Add
deinit() infrastructure").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add back erroneously removed ll-addr command, when removing
legacy Controller, which is provided when using Zephyr
Bluetooth Low Energy Controller to read the random and
public address set by the Host, and used by the Controller.
Relates to commit b67a31e411 ("Bluetooth: controller:
Remove legacy LL").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Setting the extended advertiser as default advertiser
to improve both preformence and reliability.
Signed-off-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
There were a bug in a prepare_cl_cte_rx_enable_cmd_params function.
The size of command buffer was wrong when CTE enabled in AoD mode.
The command buffer was extended by param->num_ant_ids, that was
zero in case of AoD. Then a dummy antenna switch pattern was copied
into the command buffer.
That lead to: memory overwrite, and wrong command buffer length.
The command was rejected by Controller.
To fix, use cp->switch_pattern_len that was already assigned with
correct antenna pattern length.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
In order to avoid using multiple sources of truth for the platfom's
endianness, convert the in-tree code to use the (BIG|LITTLE)_ENDIAN
Kconfig variables exclusively, instead of the compiler's
__BYTE_ORDER__.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Store the offset of mode_exc_return in the arch struct. This is required
to restore the link register to the original value, as `swap_helper.S`
saves the LSB to this field when `CONFIG_ARM_STORE_EXC_RETURN=y`.
Failing to account for this results in broken debugging when
`FPU_SHARING` or `ARM_NONSECURE_PREEMPTIBLE_SECURE_CALLS`.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
If using the advertiser list when syncing to a PA, then the
address address needs to be updated for the PA sync object.
This is a small optimization to avoid doing a copy when
the address and SID is already set.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When deleting a PA sync with bt_le_per_adv_sync_delete
Zephyr should call the `term` callback for the PA sync
as per the documentation for the callback.
This was not done in the case that the PA sync was
terminated by local request.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
To avoid legacy extended adv repots blocking important
events or work, mark them as discaradble.
Signed-off-by: Martin Tverdal <martin.tverdal@nordicsemi.no>
For test_1cpu_start/test_1cpu_stop make the code only build if
CONFIG_SMP and move to using arch_num_cpus() for runtime loops
and CONFIG_MP_MAX_NUM_CPUS for array decleration.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Replace usage of CONFIG_MP_NUM_CPUS with CONFIG_MP_MAX_NUM_CPUS for
init and declaration as we phase out CONFIG_MP_NUM_CPUS usage.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
According to specification, when executing a remote procedure the
rx parameters used need to be updated when the REQ from the peer
is received. Currently this is done only when an ACK is
received on the RSP PDU send out.
This commit updates the RX parameters upon receipt of the REQ PDU
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Prints when traffic is ongoing cost a few Mbps due to writing to UART as
observed by the profiler, so, disable them by default.
Signed-off-by: Krishna T <krishna.t@nordicsemi.no>
This commit prevents the assertion error added in the previous commit,
by introducing the following behavior.
When the Host detects that a pairing procedue would result in more than
one local identity having a bond with the same remote address, it will
try to abort the pairing. If the pairing procedure cannot be properly
aborted, it will remove the pairing locally and disconnect.
This commit also introduces a new kconfig `BT_ID_UNPAIR_MATCHING_BONDS`.
This config changes the above-described behavior to instead un-pair the
old bond and continue with the pairing (if the new bond has the same or
better security.)
The new kconfig is not enabled by default. See the help text of the new
kconfig option for more details.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
This change prevents two local identities from having bonds to the same
device.
The Core specification is not well suited for Zephyr's multiple-local-
identities feature. The HCI specification seems written with intent that
a controller is used for only one GAP device. A GAP device has at most
one public address, and at most one random static address.
The Zephyr Bluetooth API, on the other hand, has a concept of local
identities. This feature allows the Zephyr Bluetooth stack to
simulatainously assume multiple local addresses. This does not mesh well
with the above intent in the specification.
In particular, the HCI specification for the resolve list does not allow
more than one entry for a remote address. The controller will deny any
attempts at doing this.
The current implementation of the Zephyr host will try the above and be
denied. But there is no handling for this situation and the host ends up
in a confused state. Some parts of the system are ok with the two bonds,
but other parts assume this situation never occurs behave badly.
The result is that the host confuses the multiple bonds to the same
device. Symtoms include:
- Directed advertisements have a different source address than what the
host intended, in which case the two sides are confused about the
address of the Zephyr advertiser, and as a result LTKs will not match.
- Errors in the log.
This commit simply asserts. This is not a solution, just a placeholder
for a fix. The next commit will implement a strategy for handling this
situation instead of failing this assert.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
buf.c have been providing net_buf pool allocator and dealocator
for SMP packets: mcumgr_buf_alloc and mcumgr_buf_free.
The functions have been moved to smp.c and renamed
smp_packet_alloc and smp_packet_free, respectively.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
SMP buffer allocation functions have been moved to smp/smp.h,
and buf.h has been removed.
Definitions of cbor_nb_reader and cbor_nb_writer have also been moved.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit moves functions used for initialization of CBOR encoding
and decoding to the only unit that is supposed to use them.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
If 2 ASEs shared the same CIS and the first ASE had the CIS
connected before the second ASE was QoS configured, then
the CIS was missing either the TX or RX pointer, causing
it to be considered unidirectional by the ISO layer.
This commit fixes this issue by configuring the (static)
pointers at an earlier time, so that the RX and TX QoS
pointers are always valid.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Rename timer object instance create funciton `timer_create` to fix a
name collision regression with a POSIX function in `timer.h`. The issue
was introduced with commit 73a637eda0 when
first including`timer.h` into `lwm2ms.h`.
Signed-off-by: Marc Lasch <mlasch@mailbox.org>
This configuration option gives the possibility to not enable
the fs backend on startup.
Backend can be enabled in runtime using log_backend_init and
log_backend_enable functions.
Implementation is based on log_backend_net.
Signed-off-by: Wojciech Slenska <wsl@trackunit.com>
