This is a preparation for the refactoring. The old "net" command
is renamed "net_old" so that the individual commands can be
placed into a separate .c files.
This is done like this because we need to use the
SHELL_SUBCMD_SET_CREATE() to create the sub-command and then
use the SHELL_SUBCMD_ADD() in the .c files to add the command
into the sub-command and not get conflict with the same name
sub-command.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This is preparation commit that moves the net shell code to
subsys/net/lib/shell directory. The following commits will
then refactor the code in net_shell.c to smaller and more
manageable pieces.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
To enable runninng and testing this backend on the POSIX
architecture, we need to allow defining the shared memory
buffer as a compiler provided symbol, instead of a hard
address provided by the DTS.
For this case we refer to a symbol a POSIX arch implementation
(typically the board) needs to provide.
It is the responsability of that implementation to ensure
that symbol exists and points to a memory buffer of the
DT defined size.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add sleep prevention in crucial USB-C stack functions to make
state transitions faster and to send responses faster.
Signed-off-by: Michał Barnaś <mb@semihalf.com>
Add internal function that prevents one sleep of the USB-C stack.
It can allow to have longer sleep times to conserve more power, while
still having possibility to respond in the required time and
set specific registers.
Signed-off-by: Michał Barnaś <mb@semihalf.com>
HAS_DTS has become a redundant option. All Zephyr architectures now
select this option, meaning devicetree has become a de-facto
requirement. In fact, if any board does not provide a devicetree
source, the build system uses an empty stub, meaning the devicetree
machinery always runs.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
In llext_copy_symbols the check after llext_read
was looking the result of llext_seek operation instead
of the read.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Do not use timeout for UART callback. The UART IRQ bases on the IDLE
line, so waiting for additional bytes is not necessary and it introduce
additional latency.
Another issue with the timeout is that the UART drivers use sysworkq for
implementing timeout. The sysworkq thread may have lower prio than the
host command thread, which may cause a delay in calling the UART
callback, which gives the semaphore to the HC handler.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
The `BT_HCI_OP_HOST_NUM_COMPLETED_PACKETS` is not expected to generate a
response from the controller, but from the spec:
Normally, no event is generated after the
HCI_Host_Number_Of_Completed_Packets command has completed. However, if
the HCI_Host_Number_Of_Completed_Packets command contains one or more
invalid parameters, the Controller shall return an HCI_Command_Complete
event with a failure status indicating the Invalid HCI Command
Parameters error code.
In practice, this can also be generated if flow control is inadvertedly
turned off during operation. Running `hci_cmd_done` is not correct when
the event happens (as there is no corresponding command buffer), and
`ncmd` should not be returned as this command ignores the semaphore when
sending.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Refactors the implementation of the Opcode Aggregator
models to allow them to coexist on the same device.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Instead of strlen() use sizeof() in FL() macro. This way
all the checks are done at compile time instead of runtime.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Adds a goto statement to ensure that model extensions are registered
in Composition Data Page 1 if it is enabled.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
This fixes an issue where the DFU client could get stuck trying to
transmit a message to servers if the DFU client was misconfigured, for
instance missing application key or network key.
Signed-off-by: Ludvig Jordet <ludvig.jordet@nordicsemi.no>
If instantiated models don't have any relations at all, then the
extensions list will be empty. We should allow to disable it at all
to not waste RAM.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Add Kconfig option to control TCP RST behavior on connection attempts on
unbound ports. If enabled, TCP stack will reply with RST packet (enabled
by default).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Send RST as a reply for unexpected TCP packets in the following
scenarios:
1) Unexpected ACK value received during handshake (connection still open
on the peer side),
2) Unexpected data packet on a listening port (accepted connection
closed),
3) SYN received on a closed port.
This allows the other end to detect that the connection is no longer
valid (for example due to reboot) and release the resources.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add a helper function which allows to send a RST packet in response to
an unexpected TCP packet, w/o associated connection or net context.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As composite operations don't have path in CoAP packet,
it wrongly triggered a check for security object and got
denied the access.
Fixes#64012
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
When objects are initialized, empty strings should be set to length of
zero, instead of length of the full buffer.
So use INIT_OBJ_RES_DATA_LEN() to give both, the buffer size and data
length.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
When resource instances are initialized, we must calculate
beginning of the data buffer using the index and maximum
data length. Otherwise buffers would overlap with previous.
Fixes#64011
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
As the lwm2m_registry.c and specificly lwm2m_set()
functions already ensure null-terminator on string and
count that into string lenght, the content type handlers
should do the same.
When string is written, strlen()+1 is the data length.
When string is read, use the data length, so we don't
leak uninitialized strings. If buffer overrun have
removed the null-terminator the strlen() migh be larger
than data_len.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
If a receive state is removed, then the bis_syn_req callback
will be called with 0x00000000, to indicate to the application
that the sink should be desynced.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The flag was not properly set when the broadcast sink
did not add the source (e.g. if a broadcast assistant
added it).
This also downgrades two LOG_WRN to LOG_DBG as they may
happen without indicating an issue.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Resend the request with Echo option and the received Echo
option value when receiving a 4.01 (Unauthorized) response
with the Echo option.
Add missing header file kernel.h to coap_client.h.
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
When the BLOB server is in Pull mode and all chunks were received for
the current block, and the current block is the last block, then
according to section 5.2.4 of MshMBTv1.0 the server should stop sending
BLOB Partial Block Report messages if it determines that the client
knows that the transfer is complete:
```
While the Pull BLOB State Machine is in the All Chunks Received state,
the Pull BLOB State Machine continues to send the BLOB Partial Block
Report messages until one of the following happens:
• The Receive BLOB Timeout timer expires.
• If the current block is not the last block, then the client starts a
new block, in which case a new Pull BLOB State Machine is instantiated.
• If the current block is the last block, then the server determines
that the client knows the transfer is complete. For example, a
higher-layer model may indicate that the client considers the transfer
complete.
```
We currently don't have any OOB mean (for example, API) to determine
whether the client knows that the transfer is complete. We also need to
keep in mind that the Partial Block Report message can get lost so one
transmission may not be enough. The client could immediately send BLOB
Transfer Get message to get the transfer status, but this goes against
its state machine defined in section 6.2.4.2, where a Block transmission
completes when a BLOB Partial Block Report message is received with an
empty list of requested chunks (table 6.4, figure 6.1).
Because of this, we need to keep sending Partial Block Report messages.
We can keep sending them at least until Block Report timer expires.
If the client sends BLOB Transfer Get message, then it finished with
sending the block and we can change the phase and finish the transfer.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
"const k_tid_t" is "struct k_thread * const" and not
"const struct k_thread *" as the code may be assuming. Just
drop it.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The stack size was previously hardcoded in the source code, making it
difficult to change when enabling options that require a larger stack.
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
According to IEEE Std 802.1AS-2011 11.3.3, gPTP messages are not
VLAN-tagged.
Remove the use of VLAN headers for gPTP messages on the TX path.
The RX path is handled by the drivers. The network drivers in Zephyr
might need to be updated as well in order to accept receiving
non-VLAN-tagged gPTP messages when the CONFIG_NET_VLAN option is
selected.
Continue sending gPTP packets with VLAN tags when CONFIG_NET_GPTP_VLAN
is enabled. Specify that this option is for testing purposes.
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
The previous implementation was setting priority 3 (Critical
applications) for Sync, Pdelay and Pdelay_Resp messages; and priority 6
(Internetwork control) for the other PTP messages. This might have been
done under the incorrect understanding that "Critical applications" was
the highest priority.
This resulted in the Pdelay_Resp_Follow_Up getting sent before the
Pdelay_Resp message when enough TC_TX queues were being used
(NET_TC_TX_COUNT >= 2), which is an inversion compared to the intended
order.
Invert the priority of the outgoing PTP packets so that the PTP event
messages are sent with higher priority, as was originally intended.
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
The priority 3 (Critical applications) was incorrectly marked as
"highest priority", which might have led to incorrect use of
NET_PRIORITY_CA in some cases.
Note that this is already correctly advertized in other places, as it
was partially fixed in af8a0b1a5d.
NET_TC_SKIP_FOR_HIGH_PRIO was previously only allowing to push priority
3 (Critical applications) packets directly to the driver, but not the
ones with a higher priority. Change it so that it is now in effect for
priority 3 and above.
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
