If CONFIG_LOG_IMMEDIATE is enabled, then we need to handle
the output strings using a different output function.
The issue was noticed with native_posix board where no syslog
output strings were sent to network.
Fixes#14661
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
And also to the relevant callbacks.
That parameter is not used anywhere so it is useless.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that legacy functions are removew, let's rename the new functions by
removing the _new suffix.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Log RTT backed is using mutex for locking access to RTT data.
RTT console (which by default is used by printk) writes to
RTT data directly and it cannot use mutex because it can be
called from any context (including interrupt). If both
modules access RTT buffer 0, data can be corrupted.
This patch forces LOG_PRINTK option if RTT backend is used to
ensure single point of access to RTT buffer 0 data.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Backend was not initialized to work in synchronous mode if LOG_IMMEDIATE
was enabled. That causes use of rtt_lock which uses mutex. That lead to
assert in application.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
when building with clang we get the following warning:
log_core.c:358:40: error: use of logical '&&' with constant operand
[-Werror,-Wconstant-logical-operand]
This is because we are mix a constant IS_ENABLED(CONFIG_LOG_IMMEDIATE)
with non-constants.
Split out the check into its own statement to workaround the warning.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Update reserved function names starting with one underscore, replacing
them as follows:
'_k_' with 'z_'
'_K_' with 'Z_'
'_handler_' with 'z_handl_'
'_Cstart' with 'z_cstart'
'_Swap' with 'z_swap'
This renaming is done on both global and those static function names
in kernel/include and include/. Other static function names in kernel/
are renamed by removing the leading underscore. Other function names
not starting with any prefix listed above are renamed starting with
a 'z_' or 'Z_' prefix.
Function names starting with two or three leading underscores are not
automatcally renamed since these names will collide with the variants
with two or three leading underscores.
Various generator scripts have also been updated as well as perf,
linker and usb files. These are
drivers/serial/uart_handlers.c
include/linker/kobject-text.ld
kernel/include/syscall_handler.h
scripts/gen_kobject_list.py
scripts/gen_syscall_header.py
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
In case it was detected that RTT host was not present
backend was still performing single sleep or busy wait
round before dropping data. That was degrading log
processing performance.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
If system clock runs fast k_cycle_get_32(), which is the timestamp
source, wraps often (few minutes). This patch changes default
timestamp function to use k_uptime_get_32() if system clock
frequency is higher than 1 MHz and k_cycle_get_32() otherwise.
If system clock runs at 1 MHz, counter will wrap every 71.5 minutes.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Previously, _prf function was used when present and _vprintk
was used otherwise. _prf supports reacher formatting but at
cost of 3k flash and >250 bytes on stack. Stack usage then
depended on which function was used and that was causing
troubles when trimming stack sizes.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added an assert in the logger thread in case there
is no backends, instead of having that thread spinning
forever. Disabled log in qemu_xtensa board due to lack
of backends.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
There was no notification about dropped logs When logger operated
in the mode where message is dropped when logger has no space to
store the message. Notification was printed only if logger operated
in the mode which overwrites oldest log.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Some more were added since the cleanup pass in June 2018. See e.g.
commit 2d50da70a1 ("drivers: ipm: Kconfig: Remove redundant 'default n'
properties") for a motivation. It also avoids people wondering whether
or not they need to put in 'default n'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Macros are replaced by C++ friendly versions:
- SHELL_CREATE_STATIC_SUBCMD_SET by SHELL_STATIC_SUBCMD_SET_CREATE
- SHELL_CREATE_DYNAMIC_CMD by SHELL_DYNAMIC_CMD_CREATE
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
It is planned to deprecate SHELL_CREATE_STATIC_SUBCMD_SET macro
which is replaced by SHELL_STATIC_SUBCMD_SET_CREATE.
Additionally, removed irrelevant comments about alphabetical
ordering which is no longer needed.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
There are issues using lowercase min and max macros when compiling a C++
application with a third-party toolchain such as GNU ARM Embedded when
using some STL headers i.e. <chrono>.
This is because there are actual C++ functions called min and max
defined in some of the STL headers and these macros interfere with them.
By changing the macros to UPPERCASE, which is consistent with almost all
other pre-processor macros this naming conflict is avoided.
All files that use these macros have been updated.
Signed-off-by: Carlos Stuart <carlosstuart1970@gmail.com>
In case log_panic is called from context which can be
interrupted, it is safer to set panic_mode flag after
logs are flushed. If flag was set before flushing and
log_panic was interrupted then another context was
attempting to process log message directly, competing
for log backends.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
When optimizations are disabled more RAM is used and we get a stack
overflow on CONFIG_LOG_PROCESS_THREAD_STACK_SIZE. To rectify this,
increase the stack size when CONFIG_NO_OPTIMIZATIONS.
This does not scale well, and will have to be replaced by a a more
general solution eventually, but in the mean time it follows the
existing best practice established by the GCOV infrastructure in
commit e908ea9aa5
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The new Logger subsys uses a very robust formatter function in minimal
libc: _prf(). This adds up to ~3K flash. For resource constrained
devices running samples that don't use the extra formatting options,
allow them to select LOG_DISABLE_FANCY_OUTPUT_FORMATTING to revert
back to vprintk.
MCUBOOT is one such sample that has a very limited amount of output
and benefits from the flash savings due to small bootloader partition
sizes.
Signed-off-by: Michael Scott <mike@foundries.io>
Log backends (marked as autostart) are initialized late. By default
in logger thread which has the lowest priority. If log_panic() occurs
earlier no logs is printed because there is no backend enabled.
This patch fixes it by adding log_init() call to log_panic(). Log_init()
can be called multiple times.
This patch ensures that logs are printed if early panic occurs if
backend is configured to auto-start. This is not the case if shell
is acting as log backend.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
RTT log backend was locking in panic if host absense was not yet
detected (early panic). It is fixed by adding detection of host
absense while pending on data being read by the host.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Extended native posix backend to support new backend API for
'in place' mode.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added functions for processing log string and hexdump. Details
are passed as function parameters and not as log_msg. Those
functions can be used when logger works in synchronous mode
and log messages are not created.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Changed 'in place' mode to bypass logger system and directly
call active backends. With this approach memory footprint of
the logger can be significantly reduced in terms of RAM and ROM.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Dropped logs were not counted if logger has no backend
attached (system startup phase).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
It may happen that panic occured while logger backend
was formatting output data. In that case output buffer
could get corrupted as logger assumes that processing
happens in one context only (panic is the only exception).
Added log output buffer flushing on entering panic state.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This commit adds Serial Wire Output (SWO) logger backend. SWO is an
extension of Serial Wire Debug (SWD) port developed by ARM.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
MISRA-C has several rules about switch statements like each clause
end with an unconditional break. This commit fix these problems to
be in accordance with the standard.
MISRA-C rules 16.1, 16.3 and 16.4
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Refactored blocking operation of RTT backend. Log_output buffer
is used directly in case of blocking operation. Detection of
host presence added. Prevent use of RTT lock when in panic mode.
Removed pending on data being read by the host on every message.
Refactor gives savings of 300 bytes in ROM and 120 bytes in RAM.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
According with MISRA-C the value returned by a non-void function has
to be used. As memcpy return is almost useless, we are explicitly
ignoring it.
MISRA-C rule 17.7
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Extended log_output interface to handle dropped
messages. Log_output is printing a message containing
number of dropped messages.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Extended logger configuration to allow function name prefix for
messages with certain severity levels. By default only debug
messages are prefixed with function name.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Generic log message allocator was wrongly allocating single
chunk messages as initially it was intended to allocate only
multichunk messages. It resulted in invalid pointer being freed
on log message free. Issue detected by valgrind.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Remove network specific default and max log level setting
and start to use the zephyr logging values for those.
Remove LOG_MODULE_REGISTER() from net_core.h and place the
calls into .c files. This is done in order to avoid weird
compiler errors in some cases and to make the code look similar
as other subsystems.
Fixes#11343Fixes#11659
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
1. Created new shell module: shell_help.
2. Simplified command handlers with new shell print macros.
3. Removed help functions from command handlers.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Removed printing command help from help handler. It is now
realized by the shell engine. This change saves a lot of flash
but still allows to print help in command handler with function
shell_help_print.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Removing help "options" from shell API.
Currently SHELL_OPT macro is not used by users. What is more
commit: a89690d10f ignores possible options created in
command handler by the user. As a result they are not printed
in help message.
Second, currntly implemented "options" in command handlers options are
implemented without SHELL_OPT macro.
And last but not least this change will allow to implement
help handler in a way that user will not need to think about calling
functions printing help in a command handler.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Fix issue caused by 3fc497ac9a
This change removes `rtt` and `systemview` from header includes
as these are already placed in the path.
Also `SEGGER_SYSVIEW_ConfDefaults.h` header included from
`SEGGER_SYSVIEW_Int.h` is placed higher to make sure `INLINE`
definition is properly visible.
Signed-off-by: Pawel Dunaj <pawel.dunaj@nordicsemi.no>
Shell log backends were initialized from shell context. After
lowering logger thread priority order has been flipped. That
revealed a bug where shell logger backend was enabled before
backend ID's has been assigned during logger initialization.
ID assignment is moved to log backend enabling function making
it independent of order of initialization.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
