The iso_rx_pool did not use the correct buffer size due to
a missing BT_ISO_SDU_BUF_SIZE, causing it to be too small.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This fix a typo where incorrect member of bt_keys was used for
checking if LTK is present. This was resulting in bogus results
depending on connection role and current identity used.
This was affecting L2CAP/LE/CFC/BV-25-C qualification test case.
Fixes: #42862
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Periodic advertising sync may be created with CTE type filtering
enabled. When received AUX_SYNC_IND, there are HCI_LE_Periodic_-
Advertising_Sync_Established and HCI_LE_Periodic_Advertising_Report
events generated. In case received AUX_SYNC_IND has wrong CTE type,
HCI_LE_Periodic_Advertising_Sync_Established event is generated.
There may not be HCI_LE_Periodic_Advertising_Report event generated.
In this case node_rx, prepared by LLL, was not released in ULL.
It was lost in ull_sync_established_report.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
CONFIG_BT_CTLR_DF_CTE_RX is enabled by default if CONFIG_BT_CLTR_DF
is enabled and there is support for DF in given SOC.
If CONFIG_BT_CTLR_DF_SCAN_CTE_RX is disabled then the CONFIG_BT_CTLR-
_PER_SCAN_CTE_NUM_MAX is not available.
It causes build errors if that particular configuration is used by
an application. It was a case for example in split builds of direction
finding connectionless TX sample application were periodic advertising
was enabled but perddioc advertising sync was disabled.
The commit fixes the problem.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Previously the data was set incorrectly when the data was set in
multiple operations. It did not take the previous state into account.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/42648
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
There were used an uninitialized variable to set antenna identifiers
length. The value should be set with use of params argument, not
by cp pointer that is not yet initialized.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Fix to use non-discardable Rx buffer for handling Extended
and Periodic Advertising Report.
Regression introduced in
commit 18171bc774 ("Bluetooth: Host: Non-discardable event
buffer size is 255 for ext adv"). The default discardable Rx
buffer size was reduced causing increased fragmentation and
deadlock trying to get more free discardable Rx buffers to
generate HCI Extended and Periodic Advertising reports.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fixes issue #39989.
Save CCC data on pairing complete by replacing private addresses
for the just bonded device with its public address in CCC attributes'
CFG arrays. This is then followed by calls to bt_gatt_store_ccc
and bt_gatt_store_cf for the just bonded device.
Signed-off-by: Jim Benjamin Luther <jilu@oticon.com>
Fix race condition in setting up ISR callback and parameter
caused between ULL_HIGH and LLL context. As LLL IRQ is not
disabled the parameter and ISR callback would get out of
sync causing incorrect parameter supplied to callback and
hence leading to development assert in ull_scan_done().
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing use of auxiliary context to generate done event
which caused leak in release of auxiliary context being not
release when reference count that should decrease to zero.
Regression in 'commit 665a8d2c6e ("Bluetooth: Controller:
Fix repeated per sync drift compensations").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix reset of is_aux_sched flag when closing the primary and
auxiliary PDU reception. Without this fix when scan window
is closed there would be duplicate auxiliary release message
generated causing memory corruption.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add development assert to check the validity of auxiliary
context allocation. This is to ensure that primary PDU
reception does not have an auxiliary context allocated until
ULL has processed the node rx.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add development assert to check the validity of auxiliary
context's parent. This is to ensure a released auxiliary
context is not reused without allocation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fixes bug where Host sends L2CAP Flow Control Credit after receiving a
L2CAP Disconnect Response.
The when the callback in l2cap_chan_le_recv_sdu is handed a Disconnect
Reponse, the connnection becomes disconnected, as illustrated by the
asserts. The function should now trigger sending credits if the
connection is disconnected after the callback returns.
Fixes#42112
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Fix Periodic Advertising Synchronization lost implementation
to avoid processing done event twice in cases of overlapping
events or race between sync terminate being requested.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add code comment related to sync context field used to
indicate the sync established event being generated towards
HCI Layer.
Co-authored-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update implementation to generate Periodic Sync Failed to be
Established when Sync Established message could not be
generate due to lack of free node rx buffers and when there
is sync lost before sync established message could be
generated.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
In case of error in hci_df_prepare_connectionless_iq_report function
e.g. due to wrong periodic advertising sync handle, uninitilized
per_adv_sync and IQ report object were passed by cte_report_cb callback
to an application.
Correct behavior in such situation is to not to cal cte_report_cb callback.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Fix any stray Extended Auxiliary PDU from being scanned
when disabling Extended Scanning.
Updated Extended Scan disable implementation to find any
active auxiliary scan context and stop them.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix advertising pdu latest get to defer release of stale
PDU chain buffers. Returning NULL after some buffers where
released causes LLL to assert when chained PDUs are
switched.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Nordic Semiconductor Radio peripheral provides IQ samples as
12 bits signed integer with sign extended to 16 bits.
Where out of range IQ samples (saturated) have value -32768.
Due to conversion of IQ samples to 8 bit signed integer, required by
BT 5.3 Core Vol 4, Part E sections 7.7.65.21 and 7.7.65.22 the
saturation information was lost.
The PR fixes that issue by use of value -128 to mark saturated
IQ samples. Note that BT 5.3 Core does not give any particular
value of IQ sample a special meaning.
This is a vendor specific solution and does not affect other
implementations of lower link layer.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
After https://github.com/zephyrproject-rtos/zephyr/pull/41337, extended
advertising reports are no longer discardable. Ensure the
non-discardable events are large enough.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
The conn pointer is still valid / not reused at this time and can be
used further up the stack as an identifer. This simplifies the API of
ATT, and fixes callbacks in GATT that pass on this value directly since
their API does not allow conn to be NULL.
Fixes#41794
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
HCI/GEV/BV-01-C tries to send 255 bytes over HCI, as part of sending
an unknown/unsupported command, but the default buffer size
is 65, which results in a buffer overflow and undefined behaviour.
Instead of crashing hard we now check the buffer length.
In order for EDTT tests to pass we set the buffer size to 255
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
Fix Periodic Sync Terminate implementation for race
conditions with ULL scheduling by using a flag to stop any
new ULL scheduling to receive chain PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
There was missing a PDU initialization. CP bit in data channel
PDU heder was not cleared. Also cte_info byte was not crelader.
That lead to malformed control procedures PDUs and issues
with connection maintenance.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
In direction finding connected mode there is a CP bit that is set
data PDU header. The bit was initialized only if CTE transmission
was enabled. In case of reception of a CTE the bit was available
in PDUs but not initialized.
That caused issues in connection maintenance if PDU memory buffers
were reused. PDU were malformed and connections were lost.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Fix missing offset adjust field assignment in the Periodic
Advertising's sync_info struct that is present in the
Extended Advertising PDU.
When the sync offset is equal or over 2.4576 seconds from
the Extended Advertising PDU, then the sync offset has to
be reduced by 2.4576 seconds and the offs_adjust flag be
set in the sync_info field.
This fixes a bug where Periodic Synchronization could not
be established for Periodic Advertisings with intervals
greater than 2.4576 seconds as the sync offset was
incorrect due to rollover in the 13-bit offset field.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The Exchange MTU sub-procedure shall only be supported on the
LE Fixed Channel Unenhanced ATT bearer.
This was checked when receiving, but sending was allowed.
Signed-off-by: Herman Berget <herman.berget@nordicsemi.no>
The directory listing's record length should not reflect the size of the
directory listing object. This field is only the size of the directory
listing entry in the directory object and is intended to help a client
find the next record entry in the list.
Signed-off-by: Abe Kohandel <abe.kohandel@gmail.com>
Constant Tone Extension may not be transmittied with PHY CODED.
There were check to avoid situation that controller tries to
transmit or receive CTE when PHY is set to CODED.
These check were not conditionally compilated, hence when
PHY Update feature is disabled code did build.
The commit fixes the issue.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
In case the direction finding RX is enabled but without Angle
of Arrival functionality enabled, there HCI command buffer
had wrong command length assigned. It didn't take into account
two dummy antenna IDs provided to fulfil requirement from
BT 5.3 Core Vol 4, Part E sections: 7.7.82, 7.7.85.
HCI driver when received such command buffer, didn't handle it
due to wrong command length.
The commit fixes the problem.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
BT_BUF_EVT_RX_SIZE size by default was set to 68 bytes.
In case of build with direction finding connected mode receiver
enabled the size of event buffer was not enough to store all
IQ samples. In such situation IQ samples reports were not delivered
to Host.
The commit changes default size of event RX buffer to 255 in
case the BT_DF_CONNECTION_CTE_RX is enabled.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Direction finding samples had dependency on KConfig option defined
in Controller. That caused a problem for split builds where
an application and host are not part of the same binary as
controller. The code dependend on the Kconfig option
was always disabled.
To fix that issue new Kconfig options were introduced to
Host. The dependency is removed. Unwanted features may stil be
disabled and samples binaier will be smaller.
The commit aligns all direction finding samples code.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
A common pattern here was to take the work item as the subfield of a
containing object. But the contained field is not a k_work, it's a
k_work_delayable.
Things were working only because the work field was first, so the
pointers had the same value. Do things right and fix things to
produce correct code if/when that field ever moves within delayable.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Fix duplicate incomplete data status generated for Periodic
Advertising Report when LLL scheduling is used but auxiliary
context failed to be allocated in ULL.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix duplicate release of auxiliary context when scanning
uses LLL scheduling for reception of auxiliary PDU but the
reception fails.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Move the same peer periodic sync check to after check for
existing periodic sync create on both 1M and Coded PHY.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
