This fixes ASE that is not returned to pool when Codec Config
operation failed. The ASE is allocated in Codec Config operation
context. With this fix, if the operation failed to complete,
the ASE is returned back to the pool, so that it can be allocated
again by this or other client.
Fixes: #56138
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This removes redundant bt_ascs_ase_get_from_slab function and moves it's
functionality to ase_new(). It's sane, because the ASE shall be
allocated from ase_new() function context only.
bt_ascs_ase_return_to_slab() has been renamed to ase_free() to follow
the naming convention. Furthermore, few logs have been fixed/added.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The ID is ensured to be valid before ase_new() function is called, as
the client request is already validated.
On the other hand, if function is called from server initiated procedure
context, the assert shall occur as it indicates stack issue.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This adds cleanup of ASCS that is called when upper layer unregisters
it's callbacks. Without callbacks registered, the service is unusable.
The ASE's that were in non-idle state stay in this state, because the
implementation returns an error on every operation that is performed by
the client. The cleanup added moves all the ASE's to idle state.
Fixes: #56111
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Mode affects access to flash aread for `block_start`. When mode is set
to `BT_MESH_BLOB_READ` function return early, and because
`BT_MESH_BLOB_READ = 0` this is default behaviour. For write flash area
must be erased to allow driver to write there new data - bits can only
be pulled down, so overwrite will not be permitted.
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Deprecate Kconfig symbol `BT_DEBUG_LOG`. With the new `BT_LOG` having
the same effect, `BT_DEBUG_LOG` is not useful anymore and shouldn't be
used.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Move all Kconfig symbols related to Bluetooth logging into the newly
created `Kconfig.logging`. The logging symbols are now grouped by into a
menu "Bluetooth logging". Closely related symbols are grouped with each
others. For example, audio related logging symbol are found behind a
submenu "Audio" inside the "Bluetooth logging".
The deprecated logging symbols have also been moved in a submenu of
"Bluetooth logging", it's easier to avoid them so.
Behavior of the Bluetooth logging system:
When `LOG` symbol is selected, if Bluetooth is enabled (`BT` symbol
selected), the Bluetooth logging is enabled.
If the user does not set any log level, the Bluetooth logging symbols
will inherit the log level of `BT_LOG_LEVEL`. If the user does not set
the level of `BT_LOG_LEVEL`, the default log level will be the one
defined by the logging subsystem. Which currently is `LOG_LEVEL_INF`.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
PR adds 2 acknowledgment contexts to RPR client to handle
scanning and provisioning in parallel.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Consistently process BIS data, codec data and codec metadata.
Range check count of data received so that buffer overflow cannot occur.
Signed-off-by: Chris St John <chris_st._john@bose.com>
When receiving extended advertising reports with incomplete
data status, it is not necessary to mark for recovering from
currently assembled fragments, but rather drop them and
start a fresh assembly of subsequently received extended
advertising reports.
Timing changes in the Controller cause Periodic Advertising
PDUs AUX_SYNC_IND + AUX_CHAIN_IND to be placed between
primary channel ADV_EXT_IND and AUX_ADV_IND. This causes the
Controller to generate alternating incomplete and complete
data status reports, exposing the Host bug that is fixed in
this commit.
Relates to commit ba09a252ec ("bluetooth: host: refactor
bt_hci_le_per_adv_report data reassembly").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add automatic adding of the CAP Acceptor Set Member AD data.
This also moves the CAP Acceptor service data into the
cap_acceptor.c shell implementation.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fix ticker to explicitly trigger worker when ticks_to_expire
is less than or equal to elapsed time.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update ticker implementation to reschedule unreserved ticker
that use ticks_slot_window.
This will avoid unreserved ticker from continuously
overlapping with reserved tickers. And the change is
required to reduce processing overheads before reserve
ticker timeout callback executes.
Unreserved tickers with ticks_slot_window will always yield
to any colliding reserved or unreserved tickers.
The implementation moves unreserved tickers (no ticks_slot
value, in this case continuous scan window) to end of a
colliding reserved/unreserved ticker so that reserved
tickers (like central role) do not have high overheads due
to unreserved ticker's prepare (scanner) be preempted
everytime before reserved ticker's prepare (central).
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add check to the Remote Provisioning Client model init call
that verifies that the model is located at the root element.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
The ISO hci_le_cis_req event handler was missing
calls to bt_conn_unref and bt_iso_cleanup_acl to properly
clearn up the reference counters.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Added missing bt_conn_unref where bt_conn_lookup_handle is
called, but where the function returns without providing the
conn pointer to the caller.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When we supply the conn pointer of the remote device that
provides the PAST information, we do a lookup on the
conn_handle using bt_conn_lookup_handle which takes a
reference count. This count is never dereferenced again.
This commit adds calls to bt_conn_unref to ensure that we
do not keep the reference count after the function
returns.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
"The (ATT attribute read) callback can also be used locally to
read the contents of the attribute in which case no connection
will be set."
This means that callback may be called with NULL conn. Since
for ascs_ase_read NULL conn object have no meaning just return
error.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
This adds ascs_cleanup() function guarded by ZTEST_UNITTEST. The purpose
of it is to clean up the ASCS between the tests.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Fixes a bug where goto statement results into network layer skipping
the forwarding of unicast message on the ADV bearer, if the message
gets succesfully sent on the GATT bearer. This is undesirable. Node
has no knowledge of which external entity has which unicast address.
It may be possible that Proxy node can deliberately add unicast
addresses of other nodes to the whitelist to receive some traffic
for sniffing.
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
From now app layer is able to return explicit response code and
reason that will appear in ASE Control Point notification.
Fixes issues of ASCS/SR/SPE/BI-(07/08/09)-C PTS test cases, where
PTS was receiving wrong response codes and reasons.
Signed-off-by: Magdalena Kasenberg <magdalena.kasenberg@codecoup.pl>
Updated the 3 places in extended advertising where the ticker was
previously inquired about the expiration of another ticker ID in a
separate mayfly (adv_aux, adv_sync and adv_iso). It will now use the
new ticker feature where another ticker IDs expiration info will be
added to the callback.
Channel map updates are now handled in ticker_cb and applied immediately
if the ticker is not running
Signed-off-by: Troels Nilsson <trnn@demant.com>
It is now possible (via the extended ticker interface) to ask for
expiration information for another ticker ID to be returned in the
ticker callback. This utilises the extended ticker interface and a
callback function with a different context to keep the current ticker
interface as unchanged as possible.
Signed-off-by: Troels Nilsson <trnn@demant.com>
Deprecated Health client and server API has been deprecated for two
releases: 3.2.0 and 3.3.0.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Unit test project for bt_pub_key_gen().
This is part of subsys/bluetooth/host/ecc.c unit testing.
Signed-off-by: Ahmed Moheb <ahmed.moheb@nordicsemi.no>
Move newly added `bt_data_get_len` and `bt_data_serialize` from `ead.c`
to `data.c`.
Also, removed unnecessary include of `zephyr/kernel.h`.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Create a new Bluetooth library and add Encrypted Advertising Data to it.
Encrypted Advertising Data is a new feature from the Bluetooth Core
Specification 5.4. It provides a way to communicate encrypted data in
advertising, scan response and EIR packets. To do that it introduce a
new advertising data type called `Encrypted Advertising Data`. Also, it
introduce a new characteristic called `Encrypted Data Key Material`,
this provides a way to share the key material.
The library add two main functions `bt_ead_encrypt` and
`bt_ead_decrypt`.
Two helper functions are added to `bluetooth.h`. `bt_data_get_len` and
`bt_data_serialize`, the first one allow the user to get the total size
of a set of `bt_data` structures; the second one generate a spec
compliant bytes array from a `bt_data` structure. The last one is useful
because `bt_ead_encrypt` take as input those kind of bytes array.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Move the SoC Flash nRF sync ticker implementation into
Bluetooth Controller Subsystem folder, as internal headers
are included.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor the Bluetooth Controller's CMakelists.txt to
consistently use zephyr_library_sources_ifdef() and
zephyr_library_include_directories_ifdef().
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This fixes ASE release from QoS configured state.
The `ops->released` callback was not called and the `bt_ascs_ase`
was not returned to the pool, because `stream` object was already
detached.
Fixes: #55900
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This fixes possible dereference of free'd bt_ascs_ase object.
The ASE without ISO connection that goes to Releasing state will be
automously transitioned to Idle state. Thus, the `ase` object might not
be vaild anymore.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This moves ASE Control PDU length validation before request processing.
If the PDU length is not as expected, the operation shall be considered
as invalid. Thus shall be rejected.
ASCS_v1.0; 5 ASE Control operations
"A client-initiated ASE Control operation shall be defined as an invalid
length operation if the total length of all parameters written by the
client is not equal to the total length of all fixed parameters plus
the length of any variable length parameters for that operation"
Fixes: #55747Fixes: #55748
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Add new helper functions to increase readability and to
ensure correctness when aborting procedures.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Use the same unicast streams and group for the BAP and CAP
shell commands. This results in maximum flexibility, as well
as the niceness of use from CAP, as well as less memory usage.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When performing the CAP Unicast Start procedure, the remote
server(s) may change the state of the ASE before the procedure
is complete.
If the state change is unexpected, we stop the procedure and
call the callback, and then the caller can decide what to
do after that (presumably call the stop procedure for the
streams that may be setup).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Implements the CAP unicast stop procedures, which is used
to stop (either disable or release) multiple streams.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Implement the CAP unicast metadata update procedure.
The procedure lets an application update the metadata of one
or more CAP streams in a single function call, while also ensuring
that the provided metadata follows the requirement from CAP.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This modifies the audio.c shell module to support
multiple connections.
This adds support for the cap_initiator unicast-start command,
which supports multiple endpoints on multiple devices.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Implement the CAP unicast start procedure, which
will put one or more CAP streams from the idle state
to the streaming state, across or more ACL connections.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add check in CMake files to prevent resource overlap for
TIMER0, TIMER1, RTC0.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
In general, RTC and TIMER driver implements counter API but there
are exception when those peripherals are used in a custom way
(e.g. for system timer or bluetooth). In that case, system must
prevent using counter based on a reserved instance. Previously,
it was managed by Kconfig options but that cannot be maintained
when switching to devicetree configuration of the counter driver.
A new approach removes Kconfig options and instead adds static
asserts in the files which are using direct peripherals. Those
asserts check if given node is not enabled in the device tree.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Some systems can support only legacy OOB pairing while others only
LE SC OOB pairing.
The existent API function "bt_set_oob_data_flag" was removed.
Two new API functions were added:
* "bt_le_oob_set_legacy_flag" to signal that legacy OOB pairing is used
* "bt_le_oob_set_sc_flag" to signal that LE SC OOB pairing is used
The code will now advertise the presence of OOB flag depending
on the type of pairing method(SC vs legacy)
Signed-off-by: Sebastian Panceac <sebastian.panceac@ext.grandcentrix.net>
