Add checks to ensure that `zephyr,linker-region` property values are
always globally unique.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Don't let a malformed devicetree escape as a DTError. Wrap it in an
EDTError instead, so callers can just rely on the edtlib APIs as is
generally expected.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
A GCC linemarker of the form:
# 1 "filename" 2 3 4
or so is not currently being handled, because the current regular
expression assumes the "flags" values (the numbers after "filename")
are limited to a single value. Tweak the regular expression to allow
for up to 4 flags, which is what GCC documents it may emit:
https://gcc.gnu.org/onlinedocs/gcc-10.2.0/cpp/Preprocessor-Output.html
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This enables cmake extensions that can look up the path for any
devicetree alias, or check if the alias is missing, etc.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Using edt.chosen_nodes looks like a simple attribute lookup, but it's
actually calling a property that will create a new list of chosen
nodes every time. Apply a small optimization by only creating the list
once.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This commit implements west flash command for Telink B91 platform.
west flash command uses ICEman and SPI burn from AndeSight for flashing.
Signed-off-by: Alex Kolosov <rikorsev@gmail.com>
We were missing smaller sets and skipping tests when the set is smaller
than the allowed number of tests per node.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Checkpatch was checking for macro concats (##), however
we often use UTIL_CAT to allow for multiple macro expansion passes
to succeed.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
kconfiglib doesn't render backslashes in menu strings, and the prompts
in the module menu will be unintelligible on Windows. Print these
menus as posix paths on Windows as well, so they don't look broken in
menuconfig.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
The pinctrl_soc_pin_t is used as an opaque type in pinctrl to store pin
configurations which are SoC dependent.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Improve calculation of matrix and move calculations from workflow to the
testplan script. We now generate a file that can be parsed by the action
with the data needed to start twister with the right number of nodes.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Do not invoke --integration when dealing with one platform only and
generate testplan only for the needed platforms.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add yet another option, --verify-only, to west flash. This option
runs openocd with verify_image but without load_image.
Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com>
OpenOCD has verify_image command. Add `--verify` option to west flash
so that openocd can do vierfy_image right after load_image.
Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com>
This script can be used to automatically migrate the Devicetree files of
nRF-based boards using the old <signal>-pin properties to select
peripheral pins. The script will parse a board Devicetree file and will
first adjust that file by removing old pin-related properties replacing
them with pinctrl states. A board-pinctrl.dtsi file will be generated
containing the configuration for all pinctrl states. Note that script
will also work on files that have been partially ported.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The -DCMAKE_EXPORT_COMPILE_COMMANDS=1 is removed from twisterlib.py as
it is now always set by the Zephyr build system.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes: #40590
This commit updates gen_app_partitions.py to include only files present
in the current build by extracting the information from the CMake
generated `compile_commands.json` file.
This ensures that object files in sub-projects, such as `empty_cpu0`,
will not be considered by the script.
Using the compile_commands.json instead of walking the whole build tree
for finding object files also improves performance:
Time of executing `gen_app_partitions.py` (Old):
__________________________
Executed in 480.06 millis
usr time 425.83 millis
sys time 49.55 millis
Time of executing `gen_app_partitions.py` (New):
________________________________________________________
Executed in 76.22 millis
usr time 49.00 millis
sys time 24.59 millis
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Merged 3 files used to generate the test plan per PR based on the
changes. 2 python scripts and a shell script are now all merged into 1
python script that generates the input file for twister based on a list
of changed files by the PR.
This remove lots of old and obsolete code and simplifies things a bit,
no need anymore for an intermediate script to call twister, we call it
directly in the workflow and use the new test_plan script to generate
the test plan.
This also reenables the recently disabled tag based filtering which had
a bug, bug is resolved in this new implementation.
On push events, we now run twister without the --integration option to
catch any issues in the main branch that were not caught in PRs. PRs
continue to run with --integration enabled. This event (push) is now run
on 15 builders due to the increased size.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add function to check if a property of a node
is equal to a passed string.
The motivation is that in current USB device support
the sizes of bulk endpoints are configured in Kconfig.
The information if a USB device controller supports
high-speed comes from devicetree. This information must be
mapped in controller driver Kconfig and corresponding options
in USB device stack configured must be adjusted.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This action replaces current buildkite workflow and uses github actions
to build and run tests in the zephyr tree using twister. The main
differences to current builtkite workflow:
- the action handles all 3 events: pull requests, push and schedule
- the action determines size of matrix (number of build hosts) based on
the change with a minimum of 1 builder. If more tests are built/run
due to changes to boards or tests/samples, the matrix size is
increased. This will avoid timeouts when running over capacity due to
board/test changes.
- We use ccache and store cache files on amazon S3 for more flexibility
- Results are collected per build host and merged in the final step and
failures are posted into github action check runs.
- It runs on more powerful instances that can handle more load.
Currently we have 10 build hosts per run (that can increase depending
on number of tests run) and can deliver results within 1 hour.
- the action can deal with non code changes and will not allocate more
than required to deal with changes to documentation and other files
that do not require running twister
The goal long-term is better integrate this workflow with other actions
and not run unncessarily if other workflows have failed, for example, if
commit message is bogus, we should stop at that check, to avoid wasting
resources given that the commit message will have to be fixed anyways
which would later trigger another run on the same code.
Currently there is 1 open issue with this action related to a github
workflow bug where the final results are not posted to the same workflow
and might appear under other workflows. Github is working on this bug.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Do not load empty files through the ELF parser and raise exception when
magic number of ELF is not matched.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add supported device information to the device `handles` array. This
enables API's to iterate over supported devices for power management
purposes.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Black Magic Probe supports a "monitor connect_srst" command [1] to
configure whether to assert reset when connecting to the target. This is
useful to reprogram a target that may be idling in a low power state,
with an otherwise unresponsive debug core.
Adding a --connect-srst runner option for enabling this for "flash" and
"debug" operations to ensure that programming works in that case, but
also explicitly disabling it for "attach", to allow attaching to a
running target without changing its state.
Not turning this on by default since apparently some MCUs disable the
SWD interface while in reset.
[1] https://github.com/blacksphere/blackmagic/wiki/Useful-GDB-commands
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
replace with version.parse from packaging module.
prevent this warning message:
DeprecationWarning: The distutils package is deprecated
and slated for removal in Python 3.12. Use setuptools or
check PEP 632 for potential alternatives
Signed-off-by: Julien Massot <julien.massot@iot.bzh>
Change the "yes/no" value to "true/false".
Otherwise pykwalify 1.8.0 will report below errors:
- Value: 'no' for required keyword must be a boolean:
Path: '/mapping/common'>
- Value: 'yes' for required keyword must be a boolean:
Path: '/mapping/sample/mapping/name'>
Signed-off-by: Shao Ming <ming.shao@intel.com>
Added a unit divisor option to the dt_node_int_prop_int and
dt_node_int_prop_hex functions to allow retrieval of DTS items as
a size value of K, M, or G divisor similar to the dt_node_reg_size_int
function.
Signed-off-by: David Leach <david.leach@nxp.com>
Removes hardcoded logic in the west signing script that translates
Zephyr board names to rimage target names. Instead, use a cached CMake
variable set at the board level to define its respective rimage target
name. This eliminates the need to modify the west signing script when
new SOF-supported boards are introduced to Zephyr.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
With `gen_handles.py` now running on the first pre-built image,
`zephyr_pre0.elf` there is no requirement for the device handle arrays
to remain the same size after processing.
Remove the padding generated in `gen_handles.py`, as well as the
temporary option `CONFIG_DEVICE_HANDLE_PADDING` which was added to work
around this issue.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
This commit is motivated by the west discussion in:
https://github.com/zephyrproject-rtos/west/issues/548
The commit provides the ability to generate a build meta info file
containing lists of:
- Zephyr: path and revision
- Zephyr modules: name, path, and revision
- West: manifest path
path and revision for each project
For Zephyr or Zephyr modules the revision will be `null` if it is not
under git version control.
If Zephyr, a modules, or a project has uncommitted changes, the revision
will be marked dirty.
If west is not installed or used for the build process, the
west-projects list will be empty.
If a project is both a Zephyr module and a west project it will show up
in both lists.
Similar to Zephyr, which is independently referred as the Zephyr in use
but also listed as west project when west is used.
This is important in case ZEPHYR_BASE was manually set and pointing to
a different Zephyr repository.
The build meta file is not created per default but can be enabled with
the BUILD_OUTPUT_META Kconfig setting.
A project using west and having an extra Zephyr module loaded not
controlled using git can look like:
zephyr:
path: /.../zephyr
revision: 863600cd0e3c0a271e86629c5089821e5e4380cc-dirty
modules:
- name: mcuboot
path: /.../bootloader/mcuboot
revision: c61538748ead773ea75a551a7beee299228bdcaf
- name: local_module
path: /.../local_module
revision: null
west:
manifest: /.../zephyr/west.yml
projects:
- path: /.../zephyr
revision: 863600cd0e3c0a271e86629c5089821e5e4380cc-dirty
- path: /.../bootloader/mcuboot
revision: c61538748ead773ea75a551a7beee299228bdcaf
- path: /.../tools/net-tools
revision: f49bd1354616fae4093bf36e5eaee43c51a55127
And without west:
zephyr:
path: /.../zephyr
revision: 863600cd0e3c0a271e86629c5089821e5e4380cc-dirty
modules:
- name: hal_nordic
path: /.../modules/hal/nordic
revision: a6e5299041f152da5ae0ab17b2e44e088bb96d6d
west: null
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Many tests and CI activties are being missed by excluding tests
mistakingly when running twister.
This is visibile when you change one or more tests in kernel/ for
example, twister does not run those tests that have changed at all and
marking the PR as tested and ready to be merged.
Temporary fix for #40235.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fixes the following error:
ERROR: Build directory "<whatever>" is for application "<symbolic source
dir in CMakeCache.txt>", but source directory "<resolved source dir>"
was specified; please clean it, use --pristine, or use --build-dir to
set another build directory
FATAL ERROR: refusing to proceed without --force due to above error
Fixes initial commit ab82264ace ("scripts: add west build, flash, and
debug commands")
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
As described in IEEE Std 1275-1994, the PCIe bindings uses the ranges
property to describe the PCI I/O and memory regions.
Write _RANGES_ defines that will be used to determines the I/O and
memory regions from PCIe Controller drivers.
Also exclude "ranges" & "dma-ranges" property's length generation
alogn "reg" and "interrupt".
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
This adds some tests in test_edtlib.py and test.dts to check all
common possible combination of ranges property usage and handling
by edtlib.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
As described in IEEE Std 1275-1994, the PCIe bindings uses the ranges
property to describe the PCI I/O and memory regions.
Add parsing of this property in edtlib.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Add a few Bluetooth samples to track their footprint as part of the
effort to contain firmware bloat.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add GigaDevice ISP console flash runner. This tool enable uses ROM
bootloader to flash devices using serial port.
The GD32_ISP_Console tool can be found at
http://www.gd32mcu.com/download/down/document_id/175/path_type/1
Signed-off-by: Gerson Fernando Budke <gerson.budke@atl-electronics.com>
Fix few limitation which do not allow to run Twister on Windows OS.
Especially turn off "import pty" module, due to the fact, that this
module can be used only on POSIX OS.
Fixes#40007
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
Check each line whether contains the correct pattern
${location}:${file} before splitting because it
turns out that script passes also compile
definitions added in project CMakeLists.txt such as:
add_compile_definitions(ABCD="XYZ")
which results in the build failure.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
