When a memory domain is initialized, the z_libc_partition must be
included so that critical libc-related data can be accessed.
On ARM processors without TPIDRURO when THREAD_LOCAL_STORAGE is enabled,
this includes the TLS base pointer, which is used for several
thread-local variables in the kernel.
Signed-off-by: Keith Packard <keithp@keithp.com>
When active, z_libc_partition consumes an MPU region which leaves too
few for some MPU tests. Free up one by disabling HW stack protection.
Signed-off-by: Keith Packard <keithp@keithp.com>
Function uart_fifo_read() returns 'int' (it may return negative values
in error cases). Its return value is stored in the variable 'read' that
is, however, of type 'size_t'.
Change the type of the variable 'read' from 'size_t' to 'int' to
accomodate proper handling of uart_fifo_read() invocation.
Coverity-CID: 248408
Signed-off-by: Aleksandar Markovic <aleksandar.markovic.sa@gmail.com>
Makes possible to enable LwM2M protocol v1.1 features. Uses SenML JSON
as default content format.
Signed-off-by: Veijo Pesonen <veijo.pesonen@nordicsemi.no>
- add an overlay file for the bbc_microbit board with specification
of GPIO that should be used as the PWM output to buzzer
- update a PWM related macro in the microbit specific code to refer
to PWM channel instead of pin
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
- add `channel-gpios` property with GPIO assignment for the used PWM
channel to the `sw_pwm` node
- replace ambiguous "pin 21" in the sample's README with "pin P19"
that uses notation from the official micro:bit documentation and
is consistent with this pin number within the edge_connector node
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
- add `channel-gpios` property with GPIO assignments for PWM channels
to `sw_pwm` nodes
- update PWM related macros to refer to channels instead of pins
- remove no longer needed inclusion of boards/arm/bbc_microbit/board.h
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
At some recent point, directory <zephyr-root>/include was moved to
<zephyr-root>/include/zephyr. However, links from documentation to
Zephyr source on Github were not updated. Update them now.
Signed-off-by: Aleksandar Markovic <aleksandar.markovic.sa@gmail.com>
This extends the samples to build for C++ using the same code.
This shows MIPI Sys-T can work C++ too.
The change to main.c regarding to the struct log_msg_ids is
simply that the compiler errored out complaining the members
must be initialized the same order as the declaration.
Also C++ dislikes a string literal being assigned to char*,
so assign them to const char* instead.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Updates the sample.yaml file to exclude problem architectures
from this sample project. SYS-T does not support 64-bit or
big endian architectures. The posix arch is excluded as it
is generating numerous anomolous runtime messages because it
does have the means to determine when data resides in the
rodata section.
It also converts the list of allowed platforms to lists of
platforms to use for integration testing. This helps to increase
general testing coverage.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Adding configurations for enabling this sample project on cavs
platforms. This patch also contains a fix to mipi_syst library
which resolves the memory alignment issue across different
architectures.
Fixes#43344
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Fix spelling errors in assorted .rst files. The errors were found
using a tool called 'codespell'.
Signed-off-by: Aleksandar Markovic <aleksandar.markovic.sa@gmail.com>
Route printk()'s through logging subsystem. This is required
to get clean OS panics in log output. If this is not defined, e.g.
the stack backtrace is mixed with the Zephyr OS panic information.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Add initial build rules for CHRE. This change includes a Kconfig and
CMakeLists.txt to begin compiling code from the CHRE module.
Additional files are included to bridge the APIs from CHRE's to
Zephyr's. These can be found in modules/chre/include and
modules/chre/src.
Additionally, add a sample to make sure that the module builds. It can
be built via:
```
$ west build -b native_posix -p=always samples/application_development/chre
```
Signed-off-by: Yuval Peress <peress@google.com>
Documentation build for 2.7 was failing due to using only a single
character instead of double for showing a module name.
Signed-off-by: Jamie McCrae <jamie.mccrae@lairdconnect.com>
Print whether or not the code is actually in usermode.
Fail the execution with an assertion if not the case.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Changes console blocks in hello_world and magic_wand tflite-micro
samples to Kconfig blocks to match content. Fixes typos in
some networking samples so that code blocks display instead
of being hidden. Fixes path to litex-vexriscv-tflite.resc.
Signed-off-by: Lauren Murphy <lauren.murphy@intel.com>
Prior instructions were incomplete, included extra, unneeded ways to
build the app.
This should simplify the instructions.
Signed-off-by: Jimmy Brisson <jimmy.brisson@linaro.org>
Previously, you were required to set the image versions through the
CMake variables TFM_IMAGE_VERSION_{S,NS}. For better integration with
the rest of the zephyr build system, these are now KConfig variables
with the same name.
Signed-off-by: Jimmy Brisson <jimmy.brisson@linaro.org>
This displays the secure firmware version before the nonsecure firmware
version at the beginning of boot.
Signed-off-by: Jimmy Brisson <jimmy.brisson@linaro.org>
Previously, the example was a scheleton. This patch
pushes firmware images with psa_fwu_write, and completes
the firmware update example.
Signed-off-by: Jimmy Brisson <jimmy.brisson@linaro.org>
This commit adds a sample application demonstrating how to use
the PSA Firmware Update API from TF-M. It also enables the
`FIRMWARE_UPDATE` partition to be included at build time.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
Signed-off-by: Jimmy Brisson <jimmy.brisson@linaro.org>
Move include paths and add new target_include_directories to support
backwards compatibility:
* /include -> /include/zephyr
example: <irq.h> -> <zephyr/irq.h>
Issue #41543
Signed-off-by: Yuval Peress <peress@google.com>
Add loopback mode config to the sample so that the code
can be tested without an actual CAN network, but wit a
single board.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
This change augments the application object name change notification to
occur prior to the actual name change done by the OTS layer.
Notifying prior to the actual name change makes it possible to inform the
application of the current name of the object as well as the new name.
Signed-off-by: Abe Kohandel <abe.kohandel@gmail.com>
Fix usage of integration_platforms. Do not set it when the board is
excluded using some other filters.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Samples should run on a board if they have the peripheral connected, in
this case, if any LED on the board is connected to a PWM output. A
shield could be used to demonstrate a sample on a board that doesn't
have the required peripheral. In this case, it was also unclear where
that "external LED" had to be connected, unless one checks where channel
1 for PWM1 is routed to. All board LEDs are connected to pins that
cannot be driven by PWM.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The board had PWM LEDs defined in the blinky_pwm sample, mainly because
it conflicts with SPI1 pinmux. A better approach is to still define the
PWM LEDs in the board but keep the PWM controller disabled by default.
Then, samples just need to enable the PWM controller (and disable SPI if
used simultaneously).
Also updated period to 20ms (reasonable value for a PWM-driven LED).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The board had PWM LEDs defined in the blinky_pwm sample, mainly because
it conflicts with SPI1 pinmux. A better approach is to still define the
PWM LEDs in the board but keep the PWM controller disabled by default.
Then, samples just need to enable the PWM controller (and disable SPI if
used simultaneously).
Also updated period to 20ms (reasonable value for a PWM-driven LED).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The board had PWM LEDs defined in the blinky_pwm sample, mainly because
it conflicts with SPI1 pinmux. A better approach is to still define the
PWM LEDs in the board but keep the PWM controller disabled by default.
Then, samples just need to enable the PWM controller (and disable SPI if
used simultaneously).
Also updated period to 20ms (reasonable value for a PWM-driven LED).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
While the pwm-led0 alias may exist, it could happen that the node with
pwm-leds compatible is disabled, making the sample fail compilation.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Replace hardcoded LC3 codec config with the selected configuration
used in the GATT profiles.
The selected codec configuration on the client will be used on both
sides for LC3 encode/decode.
This required completing the LC3 macroes for building codec
cababilities and codec configuration as they were not setting the
max_frames_per_sdu and frames_per_sdu values.
So as a side effect this change adds the capability to pack multiple
audio frames into a single SDU - tested with 2 frames every 20ms.
Signed-off-by: Casper Bonde <casper_bonde@bose.com>
Change the receive flags in the struct bt_iso_recv_info
to a bitfield instead of a single value. This will allow
us to extend the flags with more options.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fix err and sys_token_sz not initialized when used.
Fix logging of uint32_t variables as signed.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix argument to psa_sign_hash call. Sending in the size of the hash
buffer instead of the size of the hash.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The autoconf.h header is not required because the definitions present in
the file are exposed using the compiler `-imacros` flag.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Virtual MSD J-Link support on some development boards has caused an
issue with SMP due to limiting the maximum size of UART data via the CDC
endpoint, add a link to the SMP documentation and smp_svr sample
application on how to disable MSD functionality and resolve the issue.
Signed-off-by: Jamie McCrae <jamie.mccrae@lairdconnect.com>
