Remove qemu_cortex_m3 from various bluetooth tests and samples since
they enable NVS which requires CONFIG_FLASH_PAGE_LAYOUT which is
not supported on qemu_cortex_m3 since there is no flash driver.
We get build failures with the arm-clang compiler because nvs.c
is referencing z_impl_flash_get_page_info_by_offs which does not
exist.
Switch to qemu_x86 as the integration_platforms if it was
qemu_cortex_m3 before.
Removed the bluetooth.mesh.mesh_shell.reduced_legacy as this was
added specifically for building on qemu_cortex_m3.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Zephyr SPI driver model for full-duplex operation assumes
data will be transmitted and received during each clock period.
The QMSPI driver for the XEC family also supported dual and
quad I/O use cases which are inherently half-duplex. To
support dual/quad the driver incorrectly processed spi buffers
as all transmit buffers first then all receive buffers. This
worked if only the SPI driver was used. It did not work with
the Zephyr flash SPI NOR driver which assumes SPI drivers
follow the SPI driver model. This commit implements a QMSPI
driver that follows the Zephyr SPI driver model resulting in
a slightly smaller driver. Dual/quad SPI transactions are
supported if the experimental SPI extended mode Zephyr
configuration flag is enabled. We also remove the QMSPI full duplex
driver added previously to support the flash SPI NOR driver.
Added board to spi loop-back test and spi_flash sample.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Add config file and devicetree overlay for the fvp_base_revc_2xaemv8a
board, so that this sample can run on this board.
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
Add config file and devicetree overlay for the fvp_baser_aemv8r board,
so that this sample can run on this board.
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
Add config file and devicetree overlay for the fvp_base_revc_2xaemv8a
board, so that this sample can run on this board.
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
Add config file and devicetree overlay for the fvp_baser_aemv8r board,
so that this sample can run on this board.
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
Add support for the Scan Delegator for the Broadcast
Audio Sink sample. This include advertising connectable
as well as handling PAST.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Per the BAP specification, if the Broadcast Sink role is
supported, then the Scan Delegator shall also be supported.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Enable the input pointer code for the LVGL sample in native posix. This
is supported by SDL which is used for the display anyway, so not reason
to keep it off by default.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Update thermometer sample with mcp970x temperature sensor.
Removing test with frdm_k64f integration platform as it doesn't
provide an ambient temperature sensor.
Removing the bbc_microbit board as it only seems to provide the
die temperature of the nRF51 SoC and not an ambient temperature
sensor.
Signed-off-by: Nick Ward <nix.ward@gmail.com>
The sample now support's setting up FAT FS on devices without
SD card access and this new ability requires update in documentation.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commits adds Kconfig option CONFIG_SAMPLE_FATFS_CREATE_SOME_ENTRIES
which causes the sample to attempt to create one file and one
directory, in case if listing does not show anything, just
to demnonstrate how FAT FS operations work on internal flash.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commits adds support for nrf52840dk_nrf52840 with two additional
configurations:
- with FAT FS on internal SoC flash
- with FAT FS on QSPI connected MX25
In case of SoC configuration there is re-configuration of internal
partitions done, doe to need for at least of 64kiB for FAT FS.
The QSPI configuration only defines additional partition on
external device.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Provide a sample for ivshmem-doorbell running under virtualization
(QEMU). The sample relies on existing tools (ivshmem-server,
ivshmem-client) that must be run at the host (unix).
The sample can be run on userspace or kernelspace, and on arm64 (qemu,
kvm) and x86_64 (qemu) platforms.
This execution of this code is quite complex, thus the README should be
made available in the official documentation. This is why the code is a
sample and not a test.
Signed-off-by: Rodrigo Cataldo <rodrigo.cataldo@huawei.com>
Co-authored-by: Henri Xavier <datacomos@huawei.com>
Add the config for testing the jesd jedec sfdp of the octoNor flash
on the stm32h573 disco kit.
The external octoflash is the macronix MX25LM51245 or micron.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Fix RAM overflow building for direction finding feature on
nRF53 Series, by reducing thread stack sizes. And move
building DF plus CIS feature to hci_uart sample from
hci_rpmsg sample.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix RAM overflow by using default values for
BT_BUF_ACL_RX_SIZE and BT_BUF_ACL_RX_COUNT. Default Rx size
of 27 is sufficient for nRF51 SoC, as it does not support
data length extensions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add esp32s3 overlay to qdec sample to ilustrate
the use of PCNT in quadrature enconder mode.
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
Make queues used in metairq dispatch sample capable of storing all
generated messages. This prevents seemingly random hangs that tend to
happen with some random seeds.
Fixes: #54610
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Builds on warp7_m4 were overflowing flash, hence the change to
the another platform from the allow_list, which is not causing
overflows.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
This sample is failing regularly in CI and locally for
qemu_cortex_a53_smp, seems like the stack is not enough:
thread_analyzer: 0x4001f740: STACK: unused 1040 usage 1008 / 2048 (49 %)
thread_analyzer: 0x4001f3a0: STACK: unused 944 usage 1104 / 2048 (53 %)
thread_analyzer: 0x4001f000: STACK: unused 1040 usage 1008 / 2048 (49 %)
...
Increasing to 2048 seems to make it run reliably.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
We get compile warnings of the form:
error: converting the result of
'<<' to a boolean; did you mean
'((__aeabi_ctype_table_ + 1)[(byte)] << 28) != 0'?
[-Werror,-Wint-in-bool-context]
if (!isprint(byte)) {
^
Since isprint (and the other is* functions) return an int, change check
to an explicit test against the return value.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Added a new logger backend to recieve data over a BLE
notification characteristic.
The characteristic is based on the UUID from the Nordic connect SDK
service NUS, which allows to have a UART shell over BLE.
The idea behind this, is that this logger can be used directly
with the NRF apps or any other BLE UART terminal app.
Signed-off-by: Victor Chavez <chavez-bermudez@fh-aachen.de>
Clearing the shared memory is no longer required
after bounding functionality was reworked and an attempt
to read the magic numer is no longer the case.
Signed-off-by: Emil Obalski <Emil.Obalski@nordicsemi.no>
Add the new nucleo_h503rb board for testing the adc_api driver
on the ADC1 channel6 (pf12). Read the analog value of the ADC1
input on A5 of the arduino connector (CN16).
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Similar to the changes made in #48048, compile in the appropriate lora
modem driver when `CONFIG_LORA=y`. The `LORA_SX12XX` symbol has no
use now so remove. LoRa and LoRaWAN subsystems are still marked as
unstable so no additional deprecation cycle is needed.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Move tfm_merged.hex from <build>/tfm_merged.hex to
<build>/zephyr/tfm_merged.hex.
Use relative path to the runners.yaml hex file.
This makes it possible to move the build folder.
Example would be to copy out the runners.yaml and tfm_merged.hex file
and still be able to call west flash --skip-rebuild.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
We get compile warnings of the form:
error: converting the result of
'<<' to a boolean; did you mean
'((__aeabi_ctype_table_ + 1)[(byte)] << 28) != 0'?
[-Werror,-Wint-in-bool-context]
if (!isprint(byte)) {
^
Since isprint (and the other is* functions) return an int, change check
to an explicit test against the return value.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Add all boards where the required overlay is present in the boards
folder to platform_allow. At the same time sort the list alphabetically
to keep a better overview.
Signed-off-by: Martin Jäger <martin@libre.solar>
Remove "-machine Q35" from QEMU_EXTRA_FLAGS since this is now the
default qemu_x86_64 configuration.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
