Simplifies the nanokernel timer API so that the timeout parameter must be
specified when invoking nano_isr_timer_test(), nano_fiber_timer_test(),
nano_task_timer_test() and nano_timer_test().
This obsoletes the following APIs:
nano_fiber_timer_wait()
nano_task_timer_wait()
nano_timer_wait()
Note that even the though the new API requires that the timeout parameter
be specified, there are currentl only two acceptable values:
TICKS_NONE and TICKS_UNLIMITED
Theoretically, the current implementation would allow one to supply a
finite positive value for the timeout and the system would wait up to
that many ticks for the timer to expire. However, it is thought that
that unnecessarily complicates the nanokernel timer model and so it is
left as an unsupported option. Should that change, then that feature
could be enabled by updating the documentation.
Change-Id: I8835c5342ab5025d6f70fdfbed54a50add7568d7
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the nanokernel stack API so that the timeout parameter must be
specified when invoking nano_isr_stack_pop(), nano_fiber_stack_pop(),
nano_task_stack_pop() and nano_stack_pop().
This obsoletes the following APIs:
nano_fiber_stack_pop_wait()
nano_task_stack_pop_wait()
nano_stack_pop_wait()
Note that even though the new API requires that the timeout parameter
be specified, there are currently only two acceptable values:
TICKS_NONE and TICKS_UNLIMITED
This nanokernel option does not support CONFIG_NANO_TIMEOUTS.
Change-Id: Ic7f16ee30c3534115ceffa19ef8591ecc5a79080
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the nanokernel LIFO API so that the timeout parameter must be
specified when invoking nano_isr_lifo_get(), nano_fiber_lifo_get(),
nano_task_lifo_get() and nano_lifo_get().
This obsoletes the following APIs:
nano_fiber_lifo_get_wait()
nano_fiber_lifo_get_wait_timeout()
nano_task_lifo_get_wait()
nano_task_lifo_get_wait_timeout()
nano_lifo_get_wait()
nano_lifo_get_wait_timeout()
Change-Id: Ie9f93e46da42ea33c32544c02ab1d70b893cc198
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the nanokernel semaphore API so that the timeout parameter must be
specified when invoking nano_isr_sem_take(), nano_fiber_sem_take(),
nano_task_sem_take() and nano_sem_take().
This obsoletes the following APIs:
nano_fiber_sem_take_wait()
nano_fiber_sem_take_wait_timeout()
nano_task_sem_take_wait()
nano_task_sem_take_wait_timeout()
nano_sem_take_wait()
nano_sem_take_wait_timeout()
Change-Id: If7a4bce1bd8ec8d6410d04f3c16ff1922ff0910e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the nanokernel FIFO API so that the timeout parameter must be
specified when invoking nano_isr_fifo_get(), nano_fiber_fifo_get(),
nano_task_fifo_get() and nano_fifo_get().
This obsoletes the following APIs:
nano_fiber_fifo_get_wait()
nano_fiber_fifo_get_wait_timeout()
nano_task_fifo_get_wait()
nano_task_fifo_get_wait_timeout()
nano_fifo_get_wait()
nano_fifo_get_wait_timeout()
Change-Id: Icbd2909292f1ced0bad8a70a075478536a141ef2
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Updated board to arduino_101 and updated nanokernel_objects.c
NANO_CPU_INT_REGISTER macro args.
Change-Id: I5281a84138ef031ae82cdd80ab617f94b3f712af
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
We moved away from quark_d2000_ref_board and use crb for this board.
Change-Id: Ida1fb1675134c4eff7ecd9bf2e1cd1338df7635c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Shorten the name and remove the vendor prefix. No need to add
vendor to board names.
Change-Id: I68d441121c4034276706da63d7e5420ddf317149
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Rename class in pci_dev_info struct to allow to use C++ compilers.
Updated drivers to use new struct.
Change-Id: I17b94cb7bc094bccd615c8389a28589bfa90cab8
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
Sanity test is disabling the ADC controller before doing a read.
Change-Id: I275a94244a13e80c12e6b39267c4a25dd5479002
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
() Adds board arduino_101, arduino_101_sss to sanity check.
This will build the tests against these two new boards
to catch issues.
() Updates existing sample apps to be arduino_101_sss instead of
quark_se_ss, due to renaming of boards.
Change-Id: Ic512728d2ce581539bc3ae4c9f6524d5bf01b296
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This sample just prints 'Hello World', Nothing else.
Change-Id: I93af3fdc2de342e878bc038f937e7f1ad2231bd3
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This sample is more than just a hello world, it demonstrates basic
kernel functionality that deserve to be its own sample.
A simplified Hello World sample will replace this one.
Change-Id: I9120daa1923f99def994e484783abe04db5b14eb
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This adds a sample app to utilize the PWM on Arduino 101 via the pwm_dw
driver. Refer to the source file header for more information.
Change-Id: I0ad0f24242185b7b99e66445629d676ffde0bba3
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change terminology and use SoC instead of platform. An SoC provides
features and default configurations available with an SoC. A board
implements the SoC and adds more features and IP block specific to the
board to extend the SoC functionality such as sensors and debugging
features.
Change-Id: I15e8d78a6d4ecd5cfb3bc25ced9ba77e5ea1122f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use a real board name that can run this kernel instead of a generic
name. Basic functionality exits on this board with Zephyr.
Setup of the board is mostly similar to what we have in galileo (EFI
based)
Change-Id: Ic8554f26dcac0dbbbb6d35d863482f6207dc63c5
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit also renames boards and makes naming consistent between
board name and defconfig files.
quark_d2000_reference -> quark_d2000_crb
quark_se_test_sss -> quark_se_sss_ctb
quark_se_test -> quark_se_ctb
Change-Id: Ibe6a5102edb987fe1d6ce32c8c392a87d45d6951
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Define boards based on platforms/SoCs and define them under boards/.
Also unify the naming of all platform, SoC and board files and use
platform.h for platforms and board.h for boards.
Change-Id: Icfeb96479ab5800aca98c80a79bdc3cecd645314
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The Galileo board is based on the X1000 SoC, so move galileo to
boards and create this SoC instead, inheriting all SoC related code
and configuration items.
Change-Id: I9b39f1b44644775ee48acae284b82bae7876fffb
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
First step for adding the new board layer. Create configurations for the
various boards we support on x86 under boards with the new Kconfig variables
defining them.
The board selection is optional, that means you will be able to run
make menuconfig
and create your own .config and select any SoC.
Change-Id: If08e88e9675d13f0f0501ef6750b9424b15f5dc8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
bt_gatt_discover function doesn't take user data and therefore
bt_gatt_discover_func_t is not providing any user data. It was
always providing discovery parameterts used so just match that
in function definition.
Change-Id: I90086285d02e2ef50be1d5d25299bb1c6819fdd7
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This adds peripheral sample application that is configured
in LE SC Only Mode. It tries to set security level to FIPS right
after connection is created. Two paired devices are supported.
Change-Id: I78f3e3eeaf552c52f982035168e967016858a00b
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
We can calculate the length with strlen() and there should be no need
to consider anything else except nul-terminated C strings.
Change-Id: I02ec4b1dddbb1bd457f035926c86b27f4c2ab050
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Instead of a switch statement use an if statement which is more
compact and readable.
Change-Id: Ie2cd703eef582b129d81331b4bbcee5e0eba2479
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Those applications don't require active scan to be performed.
Change-Id: I7c4b52ab8aaa700ab4fea4e2b19a66d182f799b6
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Included Services Found can be of type either Primary or Secondary.
Tester shall know the type of service discovered.
Change-Id: Ia78e0c76236bb0ce295a91c6617aa9eafdfcf60b
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds missing Type parameter in the Notification/Indication
Received event. This parameter specifies if the IUT received Notification
or Indication.
Change-Id: Ia9f4fbf6ede99c72d6c7bddb87f1aeb3b8b97600
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds extends BTP with commands to register for characteristic
value indications and notifications. These commands require CCC handle
parameter taken from PTS in the MMI.
Change-Id: Ie97c85c47590c0e29c5d8cb65cefe5f022f79f47
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
There is no point in trying to connect non connectable device.
Change-Id: I1e3d8486db7cd7ca80f226ec3f4c36ab43f14a1a
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This application only connects and disconnects to found devices.
Change-Id: Ic4d5cde52da37a369aa0583ec774c4dd116c6c6e
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This makes sure discovery UUID is a static variable so that it remain
valid once the scope changes.
Change-Id: Iaca9ab5d71f51e526dcd8439795e962bb359f9b2
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The main purpose of sample app is testing H5 driver and catching
checkpatch build issues with H5 enabled.
Change-Id: Ia02cdcb38fc8f836de0e5f87b1afe428f7021673
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This adds very simple peripheral application that supports
Device Information Service only and doesn't support pairing.
Change-Id: Iaec1317a8894db11388408d3f65af8a38d1618c3
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This patch replaces bt_gatt_attr_func_t with bt_gatt_discover_func_t
to be used as a type of discovery callback. The reason is
bt_gatt_attr_func_t don't return bt_conn which could be used
later on to issue other commands and to application to know
from which connection this results come.
Change-Id: I1f26c72ad5c8a0b97485a337c7005d34281586d7
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds Read Multiple Characteristic Values command handler
to the tester. It allows to test if GATT Client can read multiple
values from a GATT Server.
Change-Id: I994ffac73eb8e6c0a7696dc41304efd9f01c35a4
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds Long Write Characteristic Value/Descriptor command handler
to the tester. It allows to test if GATT Client writes long values properly.
Change-Id: I788707b0a043ecad6be32d9e1f8d536765ebf41a
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds Write Characteristic Value/Descriptor command handler
to the tester. It allows to test if GATT Client performs write
operation properly.
Change-Id: I3afe167c7ca2789df7d288bbc06ffc8479240da8
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds Read Long Characteristic Value/Descriptor command handler
to the tester. It allows to test if GATT Client can read long value from
a GATT Server.
Change-Id: I1c2060f7ecd45ca18ed5f9e0747121236b283631
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
