Separate setup for different low level bearer. By default the
Makefile will create version suitable for qemu testing using
slip. If one writes "make NET_IFACE=802154" then IEEE 802.15.4
radio specific settings are activated.
Because echo-server does not contain any processor specific
settings, remove the ARM config files and rename the x86
specific ones.
Change-Id: I2caf26979f32496c6efb4dd1f625a60e3e5f6744
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
struct bt_uuid is a 'tentative' UUID type and shouldn't be used for
UUID storage. Since tester application doens't know type of UUID
on compile time we need to have a common extra type that would
allow to store both 16 and 128 UUIDs.
Change-Id: Ia2775a457a732cf03ba7e4a59e6d654fcd1ab05d
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Address configurations for different Kconfig options is difficult
to test under different environments. Make it simple at the moment.
Change-Id: I689649b11b4ccb1cf1ff0e90720fa03b6dc3656b
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Modify echo-client to send packet after packet received from
server and wait unlimited ticks. Current behaviour flood messages
to server irrespective of reception at server end. Modified
behavior only for nanokernel at the moment.
Change-Id: I6aa20c5b9fc9d6d1cf8f996e90735f5d2b986e5a
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The echo-server and echo-client samples did not compile correctly
if one wanted them to work correctly using "make server" and
"make client" commands.
Change-Id: I955c6cc23c3192fcb1dfcfbda7df53050a71501f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In anticipation of supporting a local static random address in the
future it makes more sense to call BT_LE_ADV_ADDR_PUBLIC
BT_LE_ADV_ADDR_IDENTITY.
Change-Id: I4826f1dfb50b54e13a35cbe7ee74e28641c81ad1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Enable CONFIG_CONSOLE_HANDLER and disable CONFIG_UART_CONSOLE since
tester reuses that UART.
Change-Id: Ia440d75f66d01f29d10b5d6a68fc052fd8b57fa7
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Enabling BLUETOOTH_DEBUG enables also serial console conflicting with
tester reusing the same UART.
Change-Id: I8058a019e61146ff05cc44ab543cf6ec9ff418ef
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This way we avoid bugs coming from wrongly (human) counted length.
Change-Id: I95eb87a78fc12d4c5e083ce1c65d8b690ad8db78
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This way we don't need a special BT_BYTES macro and avoid bugs coming
from wrongly counted number of bytes (which is now evaluated at
build-time).
Change-Id: Ic6319234a816fe2fab6229b3bb980d0e3503e241
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Remove float option from 'max' configuration and add a new
'float' test for hardware that supports floating point.
Move configuration files into directories to ease maintenance.
Change-Id: Ibf4c88ea946a78b8025bc61409b0ab661250f4fb
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The default number of IRQs is good enough for this sample.
Change-Id: I00f2088b4c82d60717563e36ebccfecac3983522
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This application reads the 'WHO AM I' register from a LSM9DS0
sensor connected over SPI.
Change-Id: I7b0631e9bc783aea60fdb489f40058e0c15275fb
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This test builds the syncronisation app using the following config
options to verify if the build is successful:
- CONFIG_DEBUG
- CONFIG_NEWLIB_LIBC
Change-Id: Idf2fe948ab58982244b3590da938a83206103be3
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This adds code to the gpio sample apps to run on Arduino due,
using the gpio_atmel_sam3 driver.
Change-Id: Ida16ceeabf55eb7efedc94c56ff875d8fad6456d
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This renames the gpio_dw sample app to gpio, as this can be used
for multiple drivers.
Change-Id: I6f21237b5b8df10f531e47ad9f75cadfd619cd34
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Introduce new UUID API with bt_uuid, bt_uuid_16 and bt_uuid_32
structs. The specific size structs are derived from the common bt_uuid
struct to make it possible to use CONTAINER_OF().
Change-Id: I9cb03c73406acb7768d410fdf29eae75d252163c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
bt_l2cap_chan_send does actually return the number of bytes sent.
Change-Id: I862a8519c752c6b26250a21be02a927a9326617c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Now that nble driver is supported bt_enable cannot be called blocking
since it is not supported, futhermore the call to bt_gatt_register
should be done after bt_enable is complete.
Change-Id: I404f8cd8b8339dba0fd26d24edeb718eba4bf225
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enables this test case for arduino_101 platform.
Change-Id: I2a94fb90f4c57022ddf1ec11ab06bb5e59de9b6e
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Board already defined in platform_whitelist
Change-Id: I2fed4b3c0663fd15d43ee697837a89439f7bd07a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Don't use NULL pointer if aquiring net buffer failed.
Change-Id: I11a22b832d1da9559b90abe0cb83eed56d14722f
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This adds conversion of advertising data (adv_data) to be used by
bt_le_adv_start function.
Change-Id: I403ff7ebed89dbf763d258b5dcdabfbb2cb68260
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Test can be verified with
$ sanitycheck -s bluetooth/shell/test_nble -v
arduino_101 bluetooth/shell/test_nble PASSED
Change-Id: Icfc5892524041d169973bd6eb7d23b6ecffb98fc
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Fix compiler errors when CONFIG_BLUETOOTH_BREDR is not enabled.
Change-Id: I003985a9769120b3314eaf1b9563a3bf9712e32a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Move buf_data to the place it is used reducing errors when dynamic
channels are disabled.
Change-Id: I82f640ffa8046e1c9b5805658e69cb722856d445
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This reuses the existing code since that is not driver specific, with
this samples such as tester can be build using nble driver.
Change-Id: I6d9f3edf8deb2e84fce233ef02d1cd0ad6f52526
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Current quark_se target is not specified in
scripts/sanity_chk/arches/x86.ini list and apparently this is the
reason tests were not executed, change it to arduino_101.
Change-Id: Ifedcf08cc9b25839d389bd7eb92ed42012e9075a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Putting right target allows to build for arduino_101.
Change-Id: Ib11244c7f024c72f0ab0b15549be57c576bdef3c
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Currently it is not possible to build for Arduino since wrong platform
was specified.
Change-Id: I85ff6f5adb003db9a0905d6afa04bb5dfbd55d53
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
In addition to having a different CONF_FILE bt_enable needs to be given
a callback since nble driver cannot block while initializing.
Change-Id: I8bd2c79d0620e93dbecfef25c49c5529ff1ee954
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Move BLE configuration to board and enable GPIO for NBLE.
Change-Id: I99c309656430936edf6766fc99fe83b011801bb4
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
It's not a function and requires all its arguments to be build-time
constants. Make this more obvious to the end user to ease confusion.
Change-Id: I64107cf4d9db9f0e853026ce78e477060570fe6f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is the last step before obsoleting DEVICE_DEFINE() and
DEVICE_INIT_CONFIG_DEFINE().
Change-Id: Ica4257662969048083ab9839872b4b437b8b351b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Rename it to DEVICE_DEFINE() so that it fits in the 'device' namespace.
Change-Id: I3af3a39cf9154359b31d22729d0db9f710cd202b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Rename it to DEVICE_INIT_CONFIG_DEFINE(), because (a) it was not fitting
in any namespace and (b) it is not used to declare, but rather define a
object.
Change-Id: I1da5822f06b85a9fb024b5b184afd0ccc01012ec
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Test works for ARM, but not testing sys_mem_safe_write_to_text_section()
since base ARM image are XIP images.
This test could be enhanced to boot a secondary non-XIP image for ARM
to test writing to .text.
Change-Id: I56aef68afabe88588b61c273901491de0c24a39b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Applies '__stack' tag where necessary to ensure that stacks are
properly aligned.
All stacks must be properly aligned via the '__stack' macro tag.
Change-Id: Icfb04e246bd97b2185bb05e63647c7ab01993e36
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
A dummy test to verify SPI driver and API build properly.
Change-Id: Icb1ab282b4a0fa02ec949c96becdfdc16f20bc2d
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
